Thread Index for June 1998

• Date Index

• Re: faxgetty strange behavior, Matthias Apitz
• Re: How to set HylaFax to act as a network printer?, William Suetholz
  • Re: How to set HylaFax to act as a network printer?, Nico Garcia
  • Re: How to set HylaFax to act as a network printer?, Dirk Traenapp
  • Re: How to set HylaFax to act as a network printer?, Neil Padgen
  • Re: How to set HylaFax to act as a network printer?, David Woolley
  • Re: How to set HylaFax to act as a network printer?, Kevin Cheek
• Re: Priority running too high., Jim Whitby
  • Re: Priority running too high., Tim Rice
  • Re: Priority running too high., Matthias Apitz
  • Re: Priority running too high., Tim Rice
  • Re: Priority running too high., Jim Whitby
  • Re: Priority running too high., Matthias Apitz
  • Re: Priority running too high., Tim Rice
• Re: HylaFAX last page problem: REMOTE HANGUP: Invalid response to MPS (code 53), Matthias Apitz
  • Re: HylaFAX last page problem: REMOTE HANGUP: Invalid response to MPS (code 53), Glenn Burkhardt
  • Re: HylaFAX last page problem: REMOTE HANGUP: Invalid response to MPS (code 53), Hans Feringa (HFX)
• trouble with hosts-file, Burkhard Wolf
  • Re: trouble with hosts-file, Hans Feringa (HFX)
• Printing to HylaFax as to a network printer (proposal), Constantin Teodorescu
  • Re: Printing to HylaFax as to a network printer (proposal), Glenn Burkhardt
• Re: Modem uses only 1-D format, Glenn Burkhardt
  • Re: Modem uses only 1-D format, Ulrich Eckhardt
  • Re: Modem uses only 1-D format, Leslie Mikesell
  • Re: Modem uses only 1-D format, Glenn Burkhardt
  • Re: Modem uses only 1-D format, Ulrich Eckhardt
  • Re: Modem uses only 1-D format, Ulrich Eckhardt
  • Re: Modem uses only 1-D format, Ulrich Eckhardt
• Re: Config-File for ELSA 28.8 TQV ????, Jonathan Chen
  • Re: Re: Config-File for ELSA 28.8 TQV ????, Michael Mller
• permission: can't retrieve fax on ftp at port 4559, Berndt Josef Wulf
  • Re: permission: can't retrieve fax on ftp at port 4559, Jonathan Chen
  • Re: permission: can't retrieve fax on ftp at port 4559, David Woolley
  • Re: permission: can't retrieve fax on ftp at port 4559, Nico Garcia
• Sending fax problem - can't find gs_init.ps, Paul Elliott
  • Re: Sending fax problem - can't find gs_init.ps, David Woolley
  • Re: Sending fax problem - can't find gs_init.ps, Nico Garcia
• DIRK'S FAXMAILER Email to fax gateway compiling problem, Dirk Husemann
  • Re: DIRK'S FAXMAILER Email to fax gateway compiling problem, Dirk Husemann
• Exit status Oxb, kevin
  • Re: Exit status Oxb, Ulrich Eckhardt
  • Re: Exit status Oxb, David Woolley
  • Re: Exit status Oxb, Mr. Arlington Hewes
• HylaFAX accounting?, Mr. Arlington Hewes
  • Re: HylaFAX accounting?, sinisa
  • Re: HylaFAX accounting?, Mr. Arlington Hewes
• hfaxd: Cannot set privileges, Ekkehard Burkon
  • Re: hfaxd: Cannot set privileges, Matthias Apitz
  • Re: hfaxd: Cannot set privileges, Mr. Arlington Hewes
  • Re: hfaxd: Cannot set privileges, Matthias Apitz
  • Re: hfaxd: Cannot set privileges, Mr. Arlington Hewes
  • Re: hfaxd: Cannot set privileges, Matthias Apitz
  • Re: hfaxd: Cannot set privileges, Mr. Arlington Hewes
  • Re: hfaxd: Cannot set privileges, Ekkehard Burkon
  • Re: hfaxd: Cannot set privileges, Hans Feringa (HFX)
• Re: null or missing CLIENT parameter?, Ulrich Eckhardt
• Direct Connection through Serial Port, Michael Oswell
• Problems with faxcover from Unix client, Luca Maranzano
• HylaFax 4.0 - ZyXEL 2864 ID - err: pages incomplete, Martin U. Haneke
• Squished/compressed faxes, Chen Coulter
• AW: HylaFAX accounting?, Christoph Stotz
• Modem appears to be wedged, Thomas Schoessow
  • Re: Modem appears to be wedged, Jonathan Chen
• Before faxing: epsonFX (or compatible) --> ps conversion ...., GiulioŠvqQ==
• Re: HylaFax (fwd), Jonathan Chen
  • Re: HylaFax (fwd), David Woolley
• Modem Problems with faxmodem, Robert Strattum
  • Re: Modem Problems with faxmodem, Jonathan Chen
• Problem getting flexfax to queue up 2 modems, Cuong Phan
  • Re: Problem getting flexfax to queue up 2 modems, Jonathan Chen
• JobFmt and time of delivery, Giulio
• Class1 No Answer connect timeout too short, Joseph Beauchamp
  • Re: Class1 No Answer connect timeout too short, Jonathan Chen
• sendfax with -s A4 option, jm@dewcon.com
• Modem hanging while receiving fax, Michael Mller
  • Re: Modem hanging while receiving fax, Ulrich Eckhardt
  • Re: Modem hanging while receiving fax, Michael Mller
  • Re: Modem hanging while receiving fax, Michael Mller
• Re: Re: Notify, Michael Mller
  • Re: Re: Notify, Mr. Arlington Hewes
  • Re: Re: Notify, Ben Parker
• Paging won't retry after "...Unable to configure...", Paul Dugas
• How and can I change the 'LocalIdentifier', Hong Kong Observatory
  • Re: How and can I change the 'LocalIdentifier', Hong Kong Observatory
  • Re: How and can I change the 'LocalIdentifier', Nico Garcia
• Change ps2fax, its correct ?, Josep Anton Mangas de Arriba
• faxstat to output the time a fax has been sent, Giulio
• Follow-on to pixel problem, Chen Coulter
  • Re: Follow-on to pixel problem, Jonathan Chen
  • Re: Follow-on to pixel problem, Chen Coulter
• Scale of fax, Max Chow
• DID and Hylafax?, Sascha Ottolski
• Multitech CNG tones?, Mr. Arlington Hewes
• I'm sorry., Josep Anton Mangas de Arriba
• sendfax problem, Uwe Wagner
• Legal size "page width" solution, Chen Coulter
  • Re: Legal size "page width" solution, Dave Parker
• Cannot answer from FAX machine, Hong Kong Observatory
  • Re: Cannot answer from FAX machine, Hong Kong Observatory
  • Re: Cannot answer from FAX machine, Matthias Apitz
  • Re: Cannot answer from FAX machine, Hong Kong Observatory
• Re: Faxmail, David Woolley
• faxgetty and mgetty on Linux, Geoff Roberts
• Re: Require Assistiance...., David Woolley
  • Re: Require Assistiance...., Haral Tsitsivas
• Hylafax and ECM, Kai Petzke
• No response to MPS with old fax machines.., harris
  • Re: No response to MPS with old fax machines.., Mark Wilson (P. Kay Associates)
• Can't get access to HylaFAX Server, Brian DuChien
  • Re: Can't get access to HylaFAX Server, Mr. Arlington Hewes
  • Re: Can't get access to HylaFAX Server, User um FlexFax zu empfangen!
• Problem with fax-out server, Josh Duncan
  • Re: Problem with fax-out server, Mr. Arlington Hewes
• Re: Problem with fax-out server --NOW WORKING :), Josh Duncan
  • Re: Problem with fax-out server --NOW WORKING :), Mr. Arlington Hewes
• now, for the windows client :/, Josh Duncan
  • Re: now, for the windows client :/, Jonathan Chen
  • Re: now, for the windows client :/, Ulrich Eckhardt
  • Re: now, for the windows client :/, Josh Duncan
  • Re: now, for the windows client :/, Josh Duncan
  • Re: now, for the windows client :/, Josh Duncan
  • Re: now, for the windows client :/, David Woolley
• faxrm takes always 60secs (not 59, not 61) to remove a job :(, Giulio
  • Re: faxrm takes always 60secs (not 59, not 61) to remove a job :(, Jonathan Chen
• MultiTech modems, Russell Sutherland
  • Re: MultiTech modems, John Belew
• Garbled faxes not rejected, Evan Leibovitch
• resolved: flexfax windows client troubles., Josh Duncan
  • Re: resolved: flexfax windows client troubles., Jonathan Chen
• Re: Modem hanging - ELSA 33.6 TQV, Michael Mller
• Receiving faxes: a question for developers, Vassili Sukharev
• PTS problems resulting in RTN, Paul Stevens
• hi,, Holger Glaess
• faxqclean not cleaning docq?, Paul Dugas
• SEND: No response to MPS or EOP repeated 3 tries, Gildas Perrot
  • Re: SEND: No response to MPS or EOP repeated 3 tries, David N. Lewis
• textfmt, Thierry Coopman
• Email to Paging/Email to Fax, Vincent Poy
• Problem with ~/.hylarc, Damian Ivereigh
• Adaptive answer with class 1, Vasek
• resolution problem, Lars Schmitt
• hfaxd problem, Ekkehard Burkon
• break lines and sender's info in cover page, Andrea Gabellini
  • Re: break lines and sender's info in cover page, Matthias Apitz
• facsimile job 12 to 5346928 failed (fwd), Sahir
  • Re: facsimile job 12 to 5346928 failed (fwd), Jonathan Chen
• Macflex cannot delete queue, Max Chow
  • Re: Macflex cannot delete queue, Jonathan Chen
• Re: Modems, aeh0001
• Email to Paging, Vincent Poy
• Re: faxstat: Initializing server, Mr. Arlington Hewes
• faxstat: Initializing server, Alex Rier
• About the queue, Luzi Danilo
• turn off receiving faxes, answering, jm@ko-en.com
  • Re: turn off receiving faxes, answering, Tim Rice
• Printing Large Files, J.B. LaRue" (by way of "J.B. LaRue" <jb.larue@mila-inc.com>)
  • Re: Printing Large Files, Jonathan Chen
• Re: faxstat: Waiting for modem to come ready, Mr. Arlington Hewes
• hfaxd won't start, Tony Truscott
  • Re: hfaxd won't start, Nico Kadel-Garcia
• How can I configure Hylafax to retry outbound faxes more than the default?, Stan Brown
  • Re: How can I configure Hylafax to retry outbound faxes more than the default?, Jonathan Chen
• Re: Printing Received Faxes, Sascha Ottolski
• Protocol for HylaFax, Erick Thompson
• Re: MS-Outlook as HylaFax Client, Philipp Gruenig
  • RE: MS-Outlook as HylaFax Client, Rob Embry
• Re: hylafax, Jonathan Chen

Report any problems to webmaster@hylafax.org HylaFAX is a trademark of Silicon Graphics Corporation. Internet connectivity for hylafax.org is provided by: VirtuALL Private Host Services