Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Modem uses only 1-D format



According to Ulrich Eckhardt:
> 
> i use ghostscript (4.01) with the tiffg32d driver. The Zyxel Modem is 
> capable of 2-D and the HylaFAX server receives faxes with 2-D format 
> but does not send them with 2-D format.
> 
> Is there a good setting for Server/Session tracing so that i can
> see why HylaFAX decides to use 1-D compression ?.

I thought that it would only use 2-D if it had previously sent to
the same number and the info file noted the capability on the
receiving side.  Otherwise it has to hang up, re-image, and
call back if it gets it wrong.  Be sure you have sent to the 
number you are tracing already.

  Les Mikesell
    les@mcs.com



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services