Thread Index for October 1998

• Date Index

• Does ZyXEL Omni work with Hylafax, John Plate
  • Re: Does ZyXEL Omni work with Hylafax, Nico Kadel-Garcia
• Accessing received faxes, Philip Juels
  • Re: Accessing received faxes, Alan Sparks
  • Re: Accessing received faxes, Nico Kadel-Garcia
• Unspecified Transmit Phase B error, Jurg L. Jaggi
  • Re: Unspecified Transmit Phase B error, David Woolley
• Bad exit status 077400 for faxrcvd, Joel B. Stalder
  • Re: Bad exit status 077400 for faxrcvd, David Woolley
• Starting faxgetty on RH?, Ted Sudtell
  • Re: Starting faxgetty on RH?, Mr. Arlington Hewes
  • Re: Starting faxgetty on RH?, Nico Kadel-Garcia
• Re: WHFC shoots blanks!, Ted Sudtell
• RE>Re: Broken Font Config with textfmt, Michael Firkins
  • RE>Re: RE>Re: Broken Font Config with textfmt, Michael Firkins
• WHFC 0.9.0 released, Ulrich Eckhardt
  • Re: WHFC 0.9.0 released, Andy McNiece
  • Re: WHFC 0.9.0 released, Ulrich Eckhardt
• Re: Can't locate termios.h, P. Kay Associates
• modem config file for MultiTech mt5634zbav?, Harlan Stenn
  • Re: modem config file for MultiTech mt5634zbav?, Mark A. Schwenk
  • Re: modem config file for MultiTech mt5634zbav?, Harlan Stenn
  • Re: modem config file for MultiTech mt5634zbav?, Mark A. Schwenk
  • Re: modem config file for MultiTech mt5634zbav?, Harlan Stenn
• config file for UMC92144 based modems, Steffen Klupsch
• facsimile job 16 to 2653107 failed (fwd), System Administrator
• Another Sportster Phase B (was: [ no useful subject ] ), David Woolley
• hylafax-sco3.2v5.0-v4.0pl1 SCO Openserver 5.0.4 precompiled; gs262-sco3.2v4.2 precomiled", Philip Barrett
• Re: hylafax-sco3.2v5.0-v4.0pl1 SCO Openserver 5.0.4precompiled; gs2 62-sco3.2v4.2 precomiled", Tim Rice
• Pager config, Adrian Blakey
• Re: Hylafax-V4.0 on unixware 7, Tim Rice
  • Re: Hylafax-V4.0 on unixware 7, kees
  • Re: Hylafax-V4.0 on unixware 7, Olivier PRENANT
  • Re: Hylafax-V4.0 on unixware 7, Tim Rice
  • Re: Hylafax-V4.0 on unixware 7, Jonathan Chen
  • Re: Hylafax-V4.0 on unixware 7, Tim Rice
  • Re: Hylafax-V4.0 on unixware 7, Olivier PRENANT
  • Re: Hylafax-V4.0 on unixware 7, Tim Rice
  • Re: Hylafax-V4.0 on unixware 7, Olivier PRENANT
  • Re: Hylafax-V4.0 on unixware 7, Tim Rice
• T.30 Subadressing versa TSI-Hack!, Matthias Apitz
• US Robotics "56k voice faxmodem", Tom Yates
  • Re: US Robotics "56k voice faxmodem", Torsten Mller
  • Re: US Robotics "56k voice faxmodem", Darren Nickerson
• RE: hylafax-sco3.2v5.0-v4.0pl1 SCO Openserver 5.0.4 precompiled; gs2 62-sco3.2v4.2 precomiled", Philip Barrett
  • RE: hylafax-sco3.2v5.0-v4.0pl1 SCO Openserver 5.0.4 precompiled; gs2 62-sco3.2v4.2 precomiled", Tim Rice
• Re: TPC and Hylafax.., Mr. Arlington Hewes
• hylafax questions, Anjela Patnaik
• Phase B Error, System Administrator
  • Re: Phase B Error, David Woolley
  • Re: Phase B Error, Robert Colquhoun
• faxmodem does not add the modem, Dr. Ferdinand Gassauer
• Fax and Mail and remote, TTSG
  • Re: Fax and Mail and remote, David Woolley
• know when to is a fax call, Leonardo Madrigal
• USR Sportster, System Administrator
• Paging Software Purchasing Questionnaire (was: [ no useful subject ] ), David Woolley
• problems when calling sendfax from crontab, Yves Carlier
• Hylafax refuse incoming calls, Boris Prochazka
• facsimile job 11 to 98702 failed, Facsimile Agent
• FaxQueuer[361]: JOB XX: CONVERT DOCUMENT:, Arjan Knepper
  • Re: FaxQueuer[361]: JOB XX: CONVERT DOCUMENT:, David Woolley
  • Re: FaxQueuer[361]: JOB XX: CONVERT DOCUMENT:, Nico Kadel-Garcia
• Re: USR Sportster (fwd), Iris Silva
  • Re: USR Sportster (fwd), Robert Colquhoun
  • Re: USR Sportster (fwd), Iris Silva
  • Re: USR Sportster (fwd), Robert Colquhoun
  • Re: USR Sportster (fwd), Iris Silva
  • Re: USR Sportster (fwd), Iris Silva
  • Re: USR Sportster (fwd), Iris Silva
• Re: your mail, Caldera OpenLinux User
  • Re: Re: your mail, Aidan Van Dyk
  • Re: Re: your mail, Alan Sparks
• MultiTech MT2834ZPXb -- anything I should watch out for?, Tim Fredrick
  • Re: MultiTech MT2834ZPXb -- anything I should watch out for?, Chen Coulter
• newbie question, Luis Costabile
  • Re: newbie question, Nico Kadel-Garcia
  • Newbie question, Ulrich Kallenbach
  • Re: Newbie question, Damian Ivereigh
  • Re: Newbie question, Ulrich Eckhardt
• Distribution of received faxes, Amitha Perera
• Problems Sending Fax, b-team
  • Re: Problems Sending Fax, Carsten Hoeger
  • Re: Problems Sending Fax, Nico Kadel-Garcia
  • Re: Problems Sending Fax, Thomas Wimmer
• sendfax hangs (was: USR Sportster (fwd)), David Woolley
• Send fails with NO ANSWER (was: HylaxFax 4.0pl2 on FreeBSD), David Woolley
• running faxcover or sendfax from crontab, Yves Carlier
  • Re: running faxcover or sendfax from crontab, Tim Rice
• Re: Question about latest relise version of HylaFAX forLinuxs, Nico Kadel-Garcia
• Corrupted image on faxes sent from Hylafax, Tim Fredrick
  • Re: Corrupted image on faxes sent from Hylafax, Nico Kadel-Garcia
  • Re: Corrupted image on faxes sent from Hylafax, Tim Fredrick
  • Re: Corrupted image on faxes sent from Hylafax, Mr. Arlington Hewes
  • Re: Corrupted image on faxes sent from Hylafax, Mr. Arlington Hewes
• Re: MultiTech MT2834ZPXb -- anything I should watch outfor?, Andy McNiece
• tiff2ps patch for better output, John Williams
• Re: paging gateway, Andy McNiece
  • Re: paging gateway, Nico Kadel-Garcia
• Re: Compatibility, Ulrich Eckhardt
  • Re: Compatibility, David Woolley
• Are class-1 modems really that bad?, Sascha Ottolski
• WHFC 0.9.1 released, Ulrich Eckhardt
  • Re: WHFC 0.9.1 released, Thomas Wimmer
  • Re: WHFC 0.9.1 released, Ulrich Eckhardt
• Question for Line E1, Eduardo jimenez
  • Re: Question for Line E1, David Woolley
• Sportster Phase B error solution!?!, Didier Legein
• Slackware Biuld Problems, Noel Henson
  • Re: Slackware Biuld Problems, Nico Kadel-Garcia
  • Re: Slackware Biuld Problems, Aidan Van Dyk
  • Re: Slackware Biuld Problems, P. Kay Associates
• How to set up 1 hylafax server to handle multiple modems?, shui
• Re: page width?, Andrew Williams
• faxsetup patch for UnixWare 7, Tim Rice
• faxaddmodem question, Leo Wong
  • Re: faxaddmodem question, Nico Kadel-Garcia
• Viewers for 2-D encoded tiff files, Ulrich Eckhardt
  • RE: Viewers for 2-D encoded tiff files, Andrew Radke
  • Re: Viewers for 2-D encoded tiff files, Sascha Ottolski
  • RE: Viewers for 2-D encoded tiff files, Andrew Radke
  • Re: Viewers for 2-D encoded tiff files, Sascha Ottolski
• facsimile not received phase B error, Philippe JAOUEN
• Zyxel and more than one page, Jim Gottlieb
• spam fax, Mike \"Nico\" Foltinek
  • RE: spam fax, Mike \"Nico\" Foltinek
  • Re: spam fax, David Woolley
• Hylafax only sending a few lines of my faxes.Please Help, Eduardo Jacob Fuentealba
  • Re: Hylafax only sending a few lines of my faxes.Please Help, David Woolley
  • Hylafax only sending a few lines of my faxes.Please Help, Eduardo Jacob Fuentealba
  • Re: Hylafax only sending a few lines of my faxes.Please Help, David Woolley
  • Re: Hylafax only sending a few lines of my faxes.Please Help, Tim Fredrick
  • Re: Hylafax only sending a few lines of my faxes.Please Help, Damian Ivereigh
  • Re: Hylafax only sending a few lines of my faxes.Please Help, Eduardo Jacob Fuentealba
  • Re: Hylafax only sending a few lines of my faxes.Please Help, Eduardo Jacob Fuentealba
• MIME Attachments and Faxmail (again), Aaron Newsome
  • Re: MIME Attachments and Faxmail (again), Phil Watkinson
  • Re: MIME Attachments and Faxmail (again), Aaron Newsome
• quick tip for 3Com/USR chassis modem users, David N. Lewis
• MultiTech MT3334ZDX, Christophe Kalt
  • Re: MultiTech MT3334ZDX, Christophe Kalt
• OCR software for Hylafax, dennis.moreno
• modem wedged, Francesc Guasch
  • Re: modem wedged, Joel B. Stalder
  • Re: modem wedged, Nico Kadel-Garcia
  • Re: modem wedged, Francesc Guasch
• Failed job also, TTSG
  • Re: Failed job also, David Woolley
  • Re: Failed job also, Robert Colquhoun
  • Re: Failed job also, TTSG
  • Re: Failed job also, David Woolley
  • Re: Failed job also, David Woolley
• socket read errors, Marcus Flood
  • RE: socket read errors, Marcus Flood
• Printing failed faxes..., Michael Firkins
  • RE>Printing failed faxes..., Michael Firkins
• Elsa 28.8TQV - Ring detected without successful handshake, Dirk Dettmering
• How to *not* delete successful sends?, Evan Leibovitch
  • Re: How to *not* delete successful sends?, Ulrich Eckhardt
  • Re: How to *not* delete successful sends?, Aidan Van Dyk
• Administrator Privelege, Keith Gray
• Incoming, Keith Gray
  • Re: Incoming, Tim Rice
• pagesizes, jm@ko-en.com
  • Re: pagesizes, Damian Ivereigh
• Weded Modem with faxgetty, Noel Henson
• Incoming only receiving 2 - 3" on page, Keith Gray
  • Re: Incoming only receiving 2 - 3" on page, Keith Gray
• Compiliation Problems, Joshua Schmidlkofer
  • Re: Compiliation Problems, Joe Pruett
  • Re: Compiliation Problems, Nico Kadel-Garcia
• Letterheads of FAXes.., Aidan Van Dyk
• Re: Hylafax only sending a few lines of my faxes.Please Help, Evan Leibovitch
  • Re: Hylafax only sending a few lines of my faxes.Please Help, David Woolley
• Re: Hylafax only sending a few lines of my faxes.PleaseHelp, Nico Kadel-Garcia
  • Re: Hylafax only sending a few lines of my faxes.PleaseHelp, Tim Rice
• Using hylafax to access fax services, Graham D. Purcocks M.A.(Oxon.)
• hylafax v4.0pl2 pkg, Alain Berger
• snpp and hylafax server, Leonardo Madrigal
• Need to know what this error means, Jonathan Terry
  • Re: Need to know what this error means, David Woolley
  • Re: Need to know what this error means, Jonathan Terry
  • Re: Need to know what this error means, Jonathan Terry
• Can not open modem, Noel Henson
  • Re: Can not open modem, David Woolley
  • Re: Can not open modem, Arthur Corliss
• Hylafax reciving end resolution problem?, Vincent Tam
• Fixed Font for Ghostscript, David Reid
  • Re: Fixed Font for Ghostscript, Paul S. Russell
  • Re: Fixed Font for Ghostscript, David Reid
  • Re: Fixed Font for Ghostscript, David Woolley
  • Re: Fixed Font for Ghostscript, David Reid
  • Re: Fixed Font for Ghostscript, Paul S. Russell
  • Re: Fixed Font for Ghostscript, David Reid
• Unspecified Transmit Phase B error;, Ashwini Kamat
  • Re: Unspecified Transmit Phase B error;, David Woolley
  • Re: Unspecified Transmit Phase B error;, Nico Kadel-Garcia
• Hayes Accura 336/56K wont hang up properly?, Daniel Manrique
• Re: [Fwd: Administrator Privelege], David Woolley
  • Re: [Fwd: Administrator Privelege], Keith Gray
  • Re: [Fwd: Administrator Privelege], Jonathan Chen
  • Re: [Fwd: Administrator Privelege], Jonathan Chen
  • Re: [Fwd: Administrator Privelege], Keith Gray
  • Re: [Fwd: Administrator Privelege], Jonathan Chen
• HylaFaX v2.0 pl2 under Linux Redhat 5.1 width egcs 2.90.27, Michele Bassan
  • Re: HylaFaX v2.0 pl2 under Linux Redhat 5.1 width egcs 2.90.27, Valentijn Sessink
  • Re: HylaFaX v2.0 pl2 under Linux Redhat 5.1 width egcs 2.90.27, Mr. Arlington Hewes
  • Re: HylaFaX v2.0 pl2 under Linux Redhat 5.1 width egcs 2.90.27, David Woolley
  • Re: HylaFaX v2.0 pl2 under Linux Redhat 5.1 width egcs 2.90.27, Arthur Corliss
• Wedged Modem / Cannot Opem Modem Resolved, Noel Henson
  • Re: Wedged Modem / Cannot Opem Modem Resolved, Nico Kadel-Garcia
  • Re: Wedged Modem / Cannot Opem Modem Resolved, Arthur Corliss
  • Re: Wedged Modem / Cannot Opem Modem Resolved, kees
  • Re: Wedged Modem / Cannot Opem Modem Resolved, Arthur Corliss
  • Re: Wedged Modem / Cannot Opem Modem Resolved, Noel Henson
  • Re: Wedged Modem / Cannot Opem Modem Resolved, Raj Mathur
  • Re: Wedged Modem / Cannot Opem Modem Resolved, Noel Henson
  • Re: Wedged Modem / Cannot Opem Modem Resolved, Arthur Corliss
• Re: A few Hylafax questions, Nico Kadel-Garcia
• Re: Error: /undefined in 8,27, Chen Coulter
  • Error: /undefined in 8,27, JRGEN ANZER
  • Re: Error: /undefined in 8,27, David Woolley
• MS-WORD Conversion utilities..., Aidan Van Dyk
• Problems sending now!, Keith Gray
• Re: Missing separator, David Woolley
• Re: Compile errors - Help please, David Woolley
• Re: dispatching of incoming faxes according to used fax number, Andre Esser
  • Re: dispatching of incoming faxes according to used fax number, David Woolley
• Faxes curupt, Andrew Williams
  • Re: Faxes curupt, Damian Ivereigh
  • RE: Faxes curupt, Stephen Weiss
  • Re: Faxes curupt, Andrew Williams
  • Re: Faxes curupt, Andrew Williams
  • Re: Faxes curupt, Damian Ivereigh
  • Re: Faxes curupt, David Woolley
  • Re: Faxes curupt, Andrew Williams
  • Re: Faxes curupt, Damian Ivereigh
• unknown problem (check modem power), Francesc Guasch
  • Re: unknown problem (check modem power), Matthias Apitz
  • Re: unknown problem (check modem power), Damian Ivereigh
  • Re: unknown problem (check modem power), JRGEN ANZER
• Re: Unexpected DCN (was need to know what this error means), Jonathan Terry
• help with install, Jim Priest
  • Re: help with install, Nico Kadel-Garcia
• Re: Error: /undefined in 8,27 PageWidth, JRGEN ANZER
  • Re: Error: /undefined in 8,27 PageWidth, Robert Colquhoun
  • Re: Error: /undefined in 8,27 PageWidth, JRGEN ANZER
• Re: Flexfax - looking for binary, Solaris 2.6, x86, Nico Kadel-Garcia
• Zoom Telephonics 56Kx, John Conover
  • Re: Zoom Telephonics 56Kx, Glenn Burkhardt
  • Re: Zoom Telephonics 56Kx, Nico Kadel-Garcia
• Re: how do i tell???, David Woolley
• Modem does not support doc. Page Width, Francesc Guasch
  • Re: Modem does not support doc. Page Width, Nico Kadel-Garcia
  • Re: Modem does not support doc. Page Width, Francesc Guasch
  • Re: Modem does not support doc. Page Width, Aidan Van Dyk
  • Re: Modem does not support doc. Page Width, Andrew S. Howell
• Odd sendfax problem, Mike Pelley
• Hylafax, Don Linnell
• Problem installing Hylafax4.0pl2 on Solaris 2.6 x86, shui
  • Re: Problem installing Hylafax4.0pl2 on Solaris 2.6 x86, Nico Kadel-Garcia
• Re: running faxcover or sendfax from crontab SOLVED!!!, Yves Carlier
• Laserjet -> Postscript, JRGEN ANZER
  • Re: Laserjet -> Postscript, Tim Rice
• Administrator Privelege and RedHat 5.1, Keith Gray
  • Re: Administrator Privelege and RedHat 5.1, Nico Kadel-Garcia
• AW: Laserjet -> Postscript, Christoph Stotz
• WHFC Version 1.0.0, Ulrich Eckhardt
• Allowing logins via a modem when faxes are not being sent on solaris 2.6, Dave Holden
  • RE: Allowing logins via a modem when faxes are not being sent on solaris 2.6, Steven Pham
• Re: facsimile not received, Andy Smith
• DG/UX anyone?, Chris Wood
  • Re: DG/UX anyone?, John Williams
• HylaFAX Year 2000 Compliant??, KAbraha454
  • RE: HylaFAX Year 2000 Compliant??, Ken Robinson
• waiting for modem to come ready, Manfred Schtz
  • Re: waiting for modem to come ready, Damian Ivereigh
  • Re: waiting for modem to come ready, Manfred Schtz
• Serial line server, was Re: DG/UX anyone?, Nico Kadel-Garcia
  • Re: Serial line server, was Re: DG/UX anyone?, Leslie Mikesell
• USR Total Control Hub, Bruce Sedlacek
  • Re: USR Total Control Hub, Bruce Sedlacek
• confirmation report, Alex Ongena
  • RE>confirmation report, Michael Firkins
• End Of Page error (EOP), Steven Pham
  • Re: End Of Page error (EOP), Ulrich Eckhardt
  • RE: End Of Page error (EOP), Steven Pham
  • RE: End Of Page error (EOP), Steven Pham
  • Re: End Of Page error (EOP), Damian Ivereigh
  • Re: End Of Page error (EOP), David Woolley
• WHFC 1.0.1, Ulrich Eckhardt
• New install, sendfax attempts fail w/Ghostscript error, Barry Wiseman
  • Re: New install, sendfax attempts fail w/Ghostscript error, Tim Rice
• DID Support?, Chris Wood
  • Re: DID Support?, Norman Man
  • Re: DID Support?, David Woolley
  • Re: DID Support?, Chris Wood
  • Re: DID Support?, Damian Ivereigh
  • Re: DID Support?, Chris Wood
• Waiting for modem to come ready ?, Steven Pham
  • Re: Waiting for modem to come ready ?, Thomas Wimmer
• Can't send more than 1 page, Steven Pham
  • Can't send more than 1 page, Lutz Kittler
• Starting faxgetty, Philip Juels
• Hylafax and Word with telephonnumbers?, Andre Vaupel
  • Re: Hylafax and Word with telephonnumbers?, Nico Kadel-Garcia
  • Re: Hylafax and Word with telephonnumbers?, Ulrich Eckhardt
  • Re: Hylafax and Word with telephonnumbers?, David Woolley
• probemodem Fails, CN Liu
  • Re: probemodem Fails, CN Liu
  • Re: probemodem Fails, David Woolley
  • Re: probemodem Fails, Nico Kadel-Garcia
  • Probemodem Fails, CN Liu
• reliable faxmodem?, Ralf Graefe
  • Re: reliable faxmodem?, Damian Ivereigh
  • Re: reliable faxmodem?, Aidan Van Dyk
• AW: Hylafax and Word with telephonnumbers?, Christoph Stotz
• hylafax build problems, russ
  • Re: hylafax build problems, Aidan Van Dyk
• Q: Empty TSI, E Kovarski
• Automatic Processing of Received Facsimile, Philip Juels
  • Re: Automatic Processing of Received Facsimile, Nico Kadel-Garcia
  • Re: Automatic Processing of Received Facsimile, Aidan Van Dyk
  • Re: Automatic Processing of Received Facsimile, Damian Ivereigh
  • Re: Automatic Processing of Received Facsimile, David Woolley
  • Re: Automatic Processing of Received Facsimile, Nico Kadel-Garcia
• Working version of Hylafax ???, Werner M. Mayer
  • Re: Working version of Hylafax ???, Andy McNiece
  • Re: Working version of Hylafax ???, Nico Kadel-Garcia
• tiffcp help, Jeff Downes
  • Re: tiffcp help, Nico Kadel-Garcia
• Modem Wedged - What does it mean? (was: [ no subject ] ), David Woolley
• Faxprinter in Linux, Torbjörn Gard
  • Re: Faxprinter in Linux, Aidan Van Dyk
  • Re: Faxprinter in Linux, Torbjörn Gard
• HylaFAX Resources website updated, Phil Watkinson
• How to pass additional information faxcover, Super-User
• Max rings before no carrier, Brendon Perero
  • Re: Max rings before no carrier, Nico Kadel-Garcia
• hylafax submission via ftp, troy
  • Re: hylafax submission via ftp, Phil Watkinson
• WHFC 1.1.0, Ulrich Eckhardt
• cannot send faxes, receive OK, Steven A . DuChene
  • Re: cannot send faxes, receive OK, Robert Colquhoun
• german umlouds, Torsten Mueller

Report any problems to webmaster@hylafax.org HylaFAX is a trademark of Silicon Graphics Corporation. Internet connectivity for hylafax.org is provided by: VirtuALL Private Host Services