flexfax: Re: Unexpected DCN (was need to know what this error means)

[Jonathan Terry <jterry@ummelec.com>]

Thanks for the assistance, the web page and other info you gave me have solved
my problem.
Jonathan

On Tue, 20 Oct 1998, David Woolley wrote:
>> 
>> I was only sending a single page, but I will try sending 2 or 3 and see w=
>> hat
>
>[ Your lines are too long ]
>
>> happens.
>> My modem is a USR Sportster 33.6.  It is detected by Hylafax as a Class 2=
>> .0
>
>See http://www.trump.net.au/~rjc/hylafax/usr.html
>
>Note I didn't see DCN in the source code of pl1 for class 2, which either
>means it came literally from the protocol, I overlooked it, or the test
>is new to pl2.
>
>> Oct 16 16:47:54.04: [  499]: <-- [22:AT+FLI=3D"NothingSetup"\r]
>
>Caution - only valid telephone number digits and + are technically allowed
>here.
>
>> Oct 16 16:47:54.29: [  499]: --> [2:OK]
>> Oct 16 16:47:54.30: [  499]: DIAL 95765044
>> Oct 16 16:47:54.31: [  499]: <-- [13:ATDT95765044\r]
>> Oct 16 16:48:05.46: [  499]: --> [4:+FCO]
>> Oct 16 16:48:08.08: [  499]: --> [12:+FNF:=AD6@=80=C4=01=F0]
>> Oct 16 16:48:08.08: [  499]: REMOTE NSF "=AD6@=80=C4=01=F0"
>
>See http://www.trump.net.au/~rjc/hylafax/usr.html
>
>Normally it aborts here with a Unknown Phase B error, but it looks like
>your particular gibberish wasn't recognized as such.
>
>> Oct 16 16:48:38.12: [  499]: SEND send EOP (no more pages or documents)
>> Oct 16 16:48:38.12: [  499]: <-- data [2]
>> Oct 16 16:48:53.72: [  499]: --> [7:+FHS:51]
>> Oct 16 16:48:53.72: [  499]: REMOTE HANGUP: RSPREC error/got DCN (code 51=
>> )
>
>The remote hung up, when I suspect it should have acknowledged successful
>receipt at this point.  Phone rates are about to change here and I'm online
>so further diagnosis will have to wait....