Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Wedged Modem / Cannot Opem Modem Resolved



Hi Guys,

I had to use /dev/ttyS1 as well on Slackware with a fresh
kernel source tree

Kees

On Wed, 21 Oct 1998, Arthur Corliss wrote:

> On Mon, 19 Oct 1998, Noel Henson wrote:
> 
> > Date: Mon, 19 Oct 1998 09:11:38 -0700
> > From: Noel Henson <noel@cowboyz.com>
> > To: flexfax@sgi.com
> > Subject: flexfax: Wedged Modem / Cannot Opem Modem Resolved
> > 
> > Thanks to all!  Everything is finally working.
> > David Wolley hit the nail on the head!
> > 
> > The problem was that I used /dev/cua0 for the modem.  Once I switched to
> > /dev/ttyS0, everything worked.
> > 
> > Just in case this is important for future reference, I'm running
> > Slackware 3.5 (2.0.34) on a clone with a Cyrix 586-200 processor.
> > 
> > Thanks again!
> 
> That's exceedingly strange, especially considering that I have used /dev/cua0
> on Slack 3.5 for months, now, with no problems.
> 
> 	--Arthur Corliss
> 	  Bolverk's Lair -- http://www.odinicfoundation.org/arthur/
> 	  "Live Free or Die, the Only Way to Live" -- NH State Motto
> 



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services