Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Hylafax only sending a few lines of my faxes.Please Help



At 08:13 14/10/98 +0100, you wrote:
>> Oct 13 16:07:36.67: [ 4698]: SEND begin page
>
>> Oct 13 16:07:39.08: [ 4698]: <-- data [532]
>> Oct 13 16:07:39.22: [ 4698]: SENT 9743 bytes of data
>> Oct 13 16:07:39.22: [ 4698]: <-- data [2]
>> Oct 13 16:07:39.22: [ 4698]: SEND end page
>> Oct 13 16:07:43.90: [ 4698]: --> [2:  ]
>> Oct 13 16:07:43.90: [ 4698]: --> [2:OK]
>
>There are no signs of flow control here, although you have sent a rather
short
>page (not much detail), so it is possible that the overrun has been absorbed
>by buffering within the operating system and modem.  Does the rate settle
>back from the initial burst on an average length page (~30K)?
>
Thank you very much David, you are right. I changed the flow control from
hardware to software, it fixed the problem.



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services