flexfax: End Of Page error (EOP)

["Steven Pham" <steven@object-net.com>]

Hi there,

I've installed Hylafax 4.02 on Solaris with USR Sporter Fax modem x2.
Everything seems to work fine except one error at the end of each session
when Hylafax trying to tell the fax machine that this is the End Of Page
(EOF) but the fax modem either doesn't understant the command of decide
to hangup. So Hylafax think the session is not ended properly.

Here is the log:
Oct 26 18:01:49.37: [  661]: SEND end page
Oct 26 18:01:49.37: [  661]: SEND send EOP (no more pages or documents)
Oct 26 18:01:49.37: [  661]: <-- data [2]
Oct 26 18:02:05.52: [  661]: --> [7:+FHS:54]
Oct 26 18:02:05.52: [  661]: REMOTE HANGUP: No response to EOP repeated 3
times (code 54)
Oct 26 18:02:05.52: [  661]: <-- [5:ATH0\r]
Oct 26 18:02:05.65: [  661]: --> [2:OK]
Oct 26 18:02:05.65: [  661]: MODEM set DTR OFF
Oct 26 18:02:05.65: [  661]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
Oct 26 18:02:05.65: [  661]: SESSION END

Any help is appreciate.

Thank you