Well, you are using Red Hat E3, and I think your
libtiff is a good one (< 3.6.1), but it worth checking
out. If it's >= 3.6.1, you should downgrade, see
http://bugs.hylafax.org/bugzilla/show_bug.cgi?id=500
Otherwise, you must blame your USR firmware.
--- Justin Rush <jrush@xxxxxxxxxxxxxx> wrote:
from my config file for ttyS1:
--
# Modem-related stuff: should reflect modem command
interface
# and hardware connection/cabling (e.g. flow
control).
#
ModemType: Class1 # use class
1 interface
ModemRate: 19200 # rate for
DCE-DTE communication
ModemFlowControl: xonxoff # software
flow control
#
ModemSetupDTRCmd: ATS13=1&D2 # setup so
DTR drop resets modem
ModemSetupDCDCmd: AT&C1 # setup so
DCD reflects carrier (or not)
ModemNoFlowCmd: AT&H0&I0&R1 # setup
modem for no flow control
ModemHardFlowCmd: AT&H1&I0&R2 # setup
modem for hardware flow control
ModemSoftFlowCmd: AT&H2&I2&R1 # setup
modem for software flow control
ModemResultCodesCmd: ATQ0X4 # enable
result codes
#
ModemMfrQueryCmd: !USR
ModemModelQueryCmd: ATI3
ModemRevQueryCmd: ATI7 # XXX
returns a multi-line result
#
# When AT+FCLASS=1 is issued the modem automatically
switches
# to software flow control; these parameters let the
fax software
# reset flow control as needed after entering Class
1.
#
Class1NFLOCmd: AT&H0&I0&R1 # setup
modem for no flow control
Class1HFLOCmd: AT&H1&I0&R2 # setup
modem for hardware flow control
Class1SFLOCmd: "" # modem does
this automatically
#
# This should resolve "DIS/DTC received 3 times"
errors:
#
Class1ResponseWaitCmd: AT+FRS=1 # wait after
sending TCF for response
#
# The remainder of this configuration is included so
that the
# modem "idles" in Class 0 while not sending or
receiving facsimile.
#
ModemSetupAACmd: AT+FCLASS=0 # leave
modem idling in class 0
ModemAnswerCmd: AT+FCLASS=1A # answer in
Class 1
#
# Disables the reporting of bad frames by the modem.
This
# overcomes a firmware problem in the x2 and V90
Sportsters.
# It is not necessary for the Courier modem.
#
Class2NRCmd: AT+FNR=1,1,1,0
--
The modem is an old USR Courrier modem. It seems
that the modem is receiving the fax properly but the
internals of hylafax just aren't handling the fax
properly.
Anything else I can check?
Thanks,
Justin
On Mon, Sep 13, 2004 at 11:50:17AM -0700, Pedro
Rocadas wrote:
Did you configured your modem in CLass1? What is
the
value of ModemFlowControl in your config.ttyS1
file?
if it's not xonxoff try it. Other thing, you are
using
a USR modem so, I definittly recommend you hylafax
4.2.0, but if you want a better advice, throw away
that USR and buy a Multitech or a Zoom modem.
--- Justin Rush <jrush@xxxxxxxxxxxxxx> wrote:
Hello,
I am having a problem receiving multiple pages
using hylafax. The logs show that multiple
pages
were transmitted, however the resulting tif that
is
generated only has one page.
Sep 13 11:56:23 fromage FaxGetty[12548]: ANSWER:
FAX
CONNECTION DEVICE '/dev/ttyS1'
Sep 13 11:56:58 fromage FaxGetty[12548]: RECV
FAX
(000000074): from , page 1 in 0:27, INF, 3.85
line/mm, 2-D MMR, 9600 bit/s
Sep 13 11:57:28 fromage FaxGetty[12548]: RECV
FAX
(000000074): from , page 2 in 0:30, INF, 3.85
line/mm, 2-D MMR, 9600 bit/s
Sep 13 11:57:28 fromage FaxGetty[12548]: RECV
FAX
(000000074): recvq/fax000000046.tif from , route
to
<unspecified>, 2 pages in 1:05
Sep 13 11:57:30 fromage FaxGetty[12548]: RECV
FAX:
bin/faxrcvd "recvq/fax000000046.tif" "ttyS1"
"000000074" "" "" ""
Sep 13 11:57:42 fromage FaxGetty[12548]: MODEM
USR
00:00:00/Configuration Profile... Product type
US/Canada External Options
HST,V32bis,Terbo,V.FC,V.34 Fax Options
Class 1/Class 2.0 Clock Freq
20.16Mhz
Eprom 256k Ram
32k Supervisor date 12/02/94 DSP date
12/02/94 Supervisor rev 6.0.5 DSP
rev
1.0.6
And from the xferfaxlog:
09/13/04 11:56 RECV 000000074 ttyS1
"" fax "+1.###.###.####" ""
2220056 2 1:05 1:05 "" ""
""
""
(I put #'s over the number)
I am currently using hylafax-4.1.8-1rh3 on
RedHat
Enterprise Linux v3.0
What could be causing this problem?
If more information is needed, please tell me
what
and I will post it.
Thanks in advance,
Justin Rush
Internet Scout Project
jrush@xxxxxxxxxxxxxx
____________________ HylaFAX(tm) Users Mailing
List
_______________________
To subscribe/unsubscribe, click
http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe
hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm)
support,
mail sales@xxxxxxxxx*
__________________________________
Do you Yahoo!?
New and Improved Yahoo! Mail - 100MB free storage!
http://promotions.yahoo.com/new_mail
____________________ HylaFAX(tm) Users Mailing List
_______________________
To subscribe/unsubscribe, click
http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe
hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support,
mail sales@xxxxxxxxx*
__________________________________
Do you Yahoo!?
Yahoo! Mail is new and improved - Check it out!
http://promotions.yahoo.com/new_mail
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
