Re: [hylafax-users] modem hangs, nonstop RING in logs

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

On 2004.09.17 09:35 Jasen Bruggeman wrote:
> Lee,
>
> Thanks for the patch, I am using the 4.1.8-1 RPM, how do I apply this 
> patch?

You'll need to rebuild the RPM from the SRPM.

You get the 4.1.8-1 SRPM, install that, copy the patch to the SOURCES 
directory, edit the hylafax.spec file to add the patch, and then 
'rpmbuild -ba hylafax.spec'.

If this isn't clear to you, then if you can build RPMs on your system 
(e.g., if you installed everything), then I can send you an SRPM, and 
then you can just rebuild that.

> Also, do you think this problem is originally being caused by the 
> V.Everything modem or the firmware?

I don't know how to differentiate between the modem and the modem's 
firmware.

> And should I be looking at using different modems for these servers, 
> if so could you recommend any good ones.

USR modems aren't the sharpest choice for faxing, but they do function 
tolerably well in Class 1, with a few minor hiccups as you've seen.  
Otherwise, most anything is better than USR as long as it has Class 1 
support.  See http://www.hylafax.org/howto/install.html#ss2.1 for 
reccomendations.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*