Re: [hylafax-users] Unspecified Phase D error

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

On 2004.06.10 04:19 Pablo Alcubilla wrote:

> Jun 10 13:07:23.95: [ 2473]: Copy quality checking performed by host
> Jun 10 13:07:46.84: [ 2473]: RECV: 2155 total lines, 0 bad lines, 0 
> consecutive bad lines

> Jun 10 13:07:46.94: [ 2473]: Copy quality checking performed by host
> Jun 10 13:08:09.66: [ 2473]: RECV: 0 total lines, 0 bad lines, 0 
> consecutive bad lines
> Jun 10 13:08:09.66: [ 2473]: --> [10:+FPTS: 2,0]
> Jun 10 13:08:09.66: [ 2473]: --> [7:+FET: 2]
> Jun 10 13:08:09.66: [ 2473]: RECV recv EOP (no more pages or 
> documents)
> Jun 10 13:08:09.66: [ 2473]: --> [2:OK]
> Jun 10 13:08:09.66: [ 2473]: RECV send RTN (retrain negative)
> Jun 10 13:08:09.66: [ 2473]: <-- [10:AT+FPTS=2\r]
> Jun 10 13:08:09.76: [ 2473]: --> [2:OK]
> Jun 10 13:08:09.76: [ 2473]: <-- [7:AT+FDR\r]
> Jun 10 13:08:21.42: [ 2473]: --> [10:+FHNG: 100]
> Jun 10 13:08:21.42: [ 2473]: REMOTE HANGUP: Unspecified Phase D error 
> (code 100)

> Jun 10 07:07:48 mail1 FaxGetty[20334]: <-- [9:AT+FCQ=?\r]
> Jun 10 07:07:48 mail1 FaxGetty[20334]: --> [2:OK]
> Jun 10 07:07:48 mail1 FaxGetty[20334]: MODEM Supports no copy quality 
> checking

Aha.  Well, I could comment on the null response Eicon's driver, but I 
won't.  It wouldn't matter anyway because Eicon uses a Class 2 command 
set but follows T.32 (Class 2.0) specification (so there is no "right" 
response for them to give - it would be "wrong" either way).  So any 
variation between the old spec and the new spec except for the commands 
will cause confusion for Diva Server configurations.  I've just updated 
the README file.  Here it is now.  Hope it helps:

* Due to tighter adherance to ITU-T T.32 and the older Class 2   
specifications, HylaFAX copy-quality checking and ECM support now   
operates slightly different in Class 2/2.0/2.1 than in previous   
versions.  This change will not effect users of most modems, but   
because the Eicon Diva Server follows T.32 yet uses the older   Class 2 
command interface, Diva Server users will probably need   to add:
    Class2ECMType:    2.0
    Class2CQQueryCmd: !3
    Class2CQCmd:      AT
  to their respective modem config files.

> Jun 10 07:07:48 mail1 FaxGetty[20334]: <-- [10:AT+FSPL=?\r]
> Jun 10 07:07:48 mail1 FaxGetty[20334]: --> [5:ERROR]

You can eliminate this noise with "Class2SPLCmd: none".

> Jun 10 07:07:48 mail1 FaxGetty[20334]: <-- [10:AT+FTBC=0\r]
> Jun 10 07:07:48 mail1 FaxGetty[20334]: --> [5:ERROR]

Likewise, "Class2TBCCmd: none".

> Jun 10 07:07:48 mail1 FaxGetty[20334]: <-- [13:AT+FPHCTO=30\r]
> Jun 10 07:07:48 mail1 FaxGetty[20334]: --> [5:ERROR]

"Class2PHCTOCmd: none"

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*