Re: [hylafax-users] Problem using hylafax & capi4hylafax

[Holger Raschke <holger.raschke@xxxxxxxxxxxxxx>]

> > > > > To check if you have a handling problem with hylafax or with windows
> > > > > clientsoftware:
> > > > > Can you send a fax from the commandline with sendfax?
> > > >
> > > > Yes, c2sendfax works fine (c2sendfax -f TIFF -d number tif-file).
> > >
> > > i mean "sendfax", not c2faxsend. The proposal is to check the server
> > > from the command line before using windows clients.
> > >
> > > try "sendfax -n -d 12345 /etc/hosts" (or any other testfile).
> >
> > Ok, did it:
> >    suse9:/ # sendfax -n -d 9022484 /etc/hosts
> >    request id is 7 (group id 7) for host localhost (1 file)
> >    suse9:/ #
> > Which produced thiese entries in /var/log/messages:
> >    Dec  4 17:59:11 suse9 HylaFAX[5034]: Filesystem has SysV-style file
> > creation semantics.
> >    Dec  4 17:59:11 suse9 FaxQueuer[1336]: SUBMIT JOB 7
> >    Dec  4 17:59:13 suse9 FaxSend[5041]: Syntax error at line 167, missing
> > ':' in "{"
> >    Dec  4 17:59:13 suse9 FaxSend[5041]: Syntax error at line 307, missing
> > ':' in "    {"
> >    Dec  4 17:59:13 suse9 FaxSend[5041]: Syntax error at line 412, missing
> > ':' in "    }"
> >    Dec  4 17:59:13 suse9 FaxSend[5041]: Syntax error at line 413, missing
> > ':' in "}"
> >    Dec  4 18:00:38 suse9 FaxSend[5041]: Unable to setup modem on
> > /dev/faxCAPI; giving up after 2 attempts
> >    Dec  4 18:00:38 suse9 FaxQueuer[1336]: MODEM /dev/faxCAPI appears to
>
> be
>
> > wedged
> >    Dec  4 18:00:38 suse9 FaxQueuer[1336]: MODEM WEDGED: bin/wedged
> > "faxCAPI" "/dev/faxCAPI"
> >
> > No fax was sent.

It seems as if the original "faxsend" binary is used instead of c2faxsend.
- check the installpath (/var/spool/fax (c2faxrecv!) vs. 
/var/spool/hylafax (newer versions of hylafax)).
- check if your own config and config.faxCAPI are in the etc dir
- move them to another place
- rerun faxsetup and exit before faxaddmodem should be run
- move your config and config.faxCAPI back to the etc dir
- restart c2faxrecv/hylafax

For further questions, please post the config.faxCAPI and the versions 
of c4l, c4h, hylafax and if you compiled them or use the ones shipped 
with suse (may be theres a problem with suse 9; did you check their 
homepage for updates?).

> > > > I did so ....
> > > >    suse9:/ # ps -ax | grep fax
> > > >    Warning: bad syntax, perhaps a bogus '-'? See
> > > > http://procps.sf.net/faq.html
> > > >     1335 ?        S      0:00 /usr/lib/fax/hfaxd -i hylafax -o
>
> 4557 -s
>
> > 444
> >
> > > >     1336 ?        S      0:00 /usr/sbin/faxq
> > > >     3251 ?        S      0:00 /usr/bin/c2faxrecv -q /var/spool/fax
> > > >     3252 ?        S      0:00 /usr/bin/c2faxrecv -q /var/spool/fax
> > > >     3253 ?        S      0:00 /usr/bin/c2faxrecv -q /var/spool/fax
> > > >     3254 ?        S      0:00 /usr/bin/c2faxrecv -q /var/spool/fax
> > > >     3460 pts/0    R      0:00 grep fax
> > >
> > > if i remember it right, you have a C4. Then should be 10 c2faxrecv
> > > running (one for each B-channel--> 8 + 2 for management)!
> >
> > Not realy, its an AVM Fritz!Card DSL ;)

OK, everything is alright then.

--
holger


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*