Re: [hylafax-users] Problem using hylafax & capi4hylafax

["T. E." <pelegrine@xxxxxxxxxxx>]

> >>To check if you have a handling problem with hylafax or with windows
> >>clientsoftware:
> >>Can you send a fax from the commandline with sendfax?
> >
> > Yes, c2sendfax works fine (c2sendfax -f TIFF -d number tif-file).
> >
>
> i mean "sendfax", not c2faxsend. The proposal is to check the server
> from the command line before using windows clients.
>
> try "sendfax -n -d 12345 /etc/hosts" (or any other testfile).
>

Ok, did it:
    suse9:/ # sendfax -n -d 9022484 /etc/hosts
    request id is 7 (group id 7) for host localhost (1 file)
    suse9:/ #
Which produced thiese entries in /var/log/messages:
    Dec  4 17:59:11 suse9 HylaFAX[5034]: Filesystem has SysV-style file
creation semantics.
    Dec  4 17:59:11 suse9 FaxQueuer[1336]: SUBMIT JOB 7
    Dec  4 17:59:13 suse9 FaxSend[5041]: Syntax error at line 167, missing
':' in "{"
    Dec  4 17:59:13 suse9 FaxSend[5041]: Syntax error at line 307, missing
':' in "    {"
    Dec  4 17:59:13 suse9 FaxSend[5041]: Syntax error at line 412, missing
':' in "    }"
    Dec  4 17:59:13 suse9 FaxSend[5041]: Syntax error at line 413, missing
':' in "}"
    Dec  4 18:00:38 suse9 FaxSend[5041]: Unable to setup modem on
/dev/faxCAPI; giving up after 2 attempts
    Dec  4 18:00:38 suse9 FaxQueuer[1336]: MODEM /dev/faxCAPI appears to be
wedged
    Dec  4 18:00:38 suse9 FaxQueuer[1336]: MODEM WEDGED: bin/wedged
"faxCAPI" "/dev/faxCAPI"

No fax was sent.

> >
> > I did so ....
> >     suse9:/ # ps -ax | grep fax
> >     Warning: bad syntax, perhaps a bogus '-'? See
> > http://procps.sf.net/faq.html
> >      1335 ?        S      0:00 /usr/lib/fax/hfaxd -i hylafax -o 4557 -s
444
> >      1336 ?        S      0:00 /usr/sbin/faxq
> >      3251 ?        S      0:00 /usr/bin/c2faxrecv -q /var/spool/fax
> >      3252 ?        S      0:00 /usr/bin/c2faxrecv -q /var/spool/fax
> >      3253 ?        S      0:00 /usr/bin/c2faxrecv -q /var/spool/fax
> >      3254 ?        S      0:00 /usr/bin/c2faxrecv -q /var/spool/fax
> >      3460 pts/0    R      0:00 grep fax
>
> if i remember it right, you have a C4. Then should be 10 c2faxrecv
> running (one for each B-channel--> 8 + 2 for management)!
>

Not realy, its an AVM Fritz!Card DSL ;)

> --
> holger

c y
Torsten

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*