Re: [hylafax-users] Sendfax -d <number> file.tif doesn't work? / Stays in queue!

[Holger Raschke <holger.raschke@xxxxxxxxxxxxxx>]

> Hi,
>
> Thx for helping:
>
> hylafax version: 4.1.1

This is rather old. Upgrade to the latest version.
The old version is also the reason for the problems with faxrcvd because 
of the amount of parameters.

> capi4hylafax version: 01.02.02 build: ??
> ---------------------- config snip -----------------------
> #ContCoverPage:         "etc/cover.templ"
> #DestControls:          "etc/destctrls"
> #DialStringRules:       "etc/dialrules"
> #QualifyCID:            "etc/cid"
> #QualifyTSI:            "etc/tsi"
> #ServerTracing:         0x08501
> InternationalPrefix:    00
> SendFaxCmd:             /usr/local/bin/c2faxsend

is c2faxrecv running? it replaces faxgetty and tells hylafax about the 
modems.
what does your config.faxCAPI look like?

> ------------------------config snap ---------------------
> ------------------------  log -----------------------------
> Sep 24 07:35:39.10: [  310]: SESSION BEGIN 00000015 +49.00.00000
> Sep 24 07:35:39.10: [  310]: Incoming analog call on controller 1 to
> 7248119.
> Sep 24 07:35:48.10: [  310]: Connection established.
> Sep 24 07:35:48.10: [  310]:    StationID = +49 00 00000
> Sep 24 07:35:48.10: [  310]:    BaudRate  = 14400
> Sep 24 07:35:48.10: [  310]:    Flags     = HighRes, MMR_compr
> Sep 24 07:35:48.13: [  310]: Write fax in path /var/spool/hylafax to file
> recvq/fax00011.tif.
> Sep 24 07:35:57.67: [  310]: Page 1 was received. - Last Page!
> Sep 24 07:36:00.31: [  310]: Fax received and calling
> '/var/spool/fax/bin/faxrcvd "recvq/fax00011.tif" "faxCAPI" "00000015" ""
> "+49 00 00000" "" "7248119"'.

c2faxrecv passes 7 parameters to faxrcvd but ...

> # modified faxrcvd from hylafax which calls faxrcvd-mail
> #
> if [ $# != 4 ]; then
>     echo "Usage: $0 file devID commID error-msg"
>     exit 1
> fi

...faxrcvd only expects 4! It's because of the old version.
A quick solution would be replacing the "if ..." line with

if [ $# -lt 4 ]; then

> FILE="$1"
> DEVICE="$2"
> COMMID="$3"
> MSG="$4"
> TRUNCFILE=`echo $FILE | sed -e 's/\.tif//'`
>
> test -f etc/setup.cache || {
>     SPOOL=`pwd`
>     cat<<EOF
>
> FATAL ERROR: $SPOOL/etc/setup.cache is missing!
>
> The file $SPOOL/etc/setup.cache is not present.  This
> probably means the machine has not been setup using the faxsetup(1M)
> command.  Read the documentation on setting up HylaFAX before you
> startup a server system.
>
> EOF
>     exit 1
> }
> . etc/setup.cache
>
> /usr/bin/tiff2ps -a -O $SPOOL/$TRUNCFILE.ps $SPOOL/$FILE
> /usr/bin/ps2pdf13 $SPOOL/$TRUNCFILE.ps $SPOOL/$TRUNCFILE.pdf
>
> TOADDR=root
> PATH="$SPOOL/sbin:$SPOOL/bin:$PATH"
>
> #
> # If you're using faxcron and would like to have the recvq file removed if
> # mail delivery was successful, then uncomment this if clause and comment
> # the line(s) following.
> #
> #if faxrcvd-mail "$FILE" "$DEVICE" "$COMMID" "$MSG" "$TOADDR" fax
> "$TRUNCFILE.p
> #/usr/sbin/sendmail $TOADDR; then
> #       rm -f $SPOOL/$TRUNCFILE*
> #fi
>
> if faxrcvd-mail "$FILE" "$DEVICE" "$COMMID" "$MSG" "$TOADDR" fax

you don't need the faxrcvd-mail skripts with newer versions of hylafax. 
This has become an implemented feature.

> "$TRUNCFILE.pd
> /usr/sbin/sendmail $TOADDR; then
>         rm -f $SPOOL/$TRUNCFILE.pdf
> fi
> ---------------------------- faxrcvd
> snap-------------------------------------
>
> tux:/var/spool/hylafax/recvq# sh -x /var/spool/fax/bin/faxrcvd
> "recvq/fax00011.tif" "faxCAPI" "00000015" "" "+49 00 00000" "" "7248119"
> + '[' 7 '!=' 4 ']'

faxrcvd exits here. reason: see comments above.

--
Holger


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*