Re: [hylafax-users] Cutting of image

["Steve Tempest" <steve@suncoastdaily.com>]

I'd like to thank you for the time you have spend bouncing emails back and
forth with me. I have changed modems and am getting a perfect result. The
modem I was using initially was an external Diamond Voice EX560LK. I have
changed that to FCC: H52PT-3020 56k Flex modem and all my troubles are gone.

Thanks for all your help

Steve Tempest


----- Original Message ----- 
From: "Frank Peters" <frank.peters@comcast.net>
To: "Steve Tempest" <steve@suncoastdaily.com>
Cc: <hylafax-users@hylafax.org>
Sent: Wednesday, May 14, 2003 2:38 PM
Subject: Re: [hylafax-users] Cutting of image


> On Wed, 14 May 2003 13:33:33 +1000
> Steve Tempest <steve@suncoastdaily.com> wrote:
>
> >
> > I have access to three different fax machines (Different Brands and
Vintage)
> > in this building and all are returning the same result.
> >
>
> The only thing that my inexperienced eyes can glean from the log is
> that your modem is configured for XON/XOFF flow control.  Maybe
> you can try to change this to RTSCTS.
>
> In SPOOL/etc/configure.ttyS0
>
> ModemFlowControl: rtscts
>
> Also, make sure that your speed is high enough.
>
> ModemRate: 115200
>
> You should check other modem parameters using the user manual
> that came with your modem.
>
> Also check the /dev/ttyS0 settings with setserial and change if
> necessary.
>
> Frank Peters
>



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*