[hylafax-users] CID & DTMF

Hi All,

I setup HylaFAX 4.2.3.1 on Debian Sarge with four Zoom PCI 2920 Plus modems. Sending and receiving faxes work great, but I’m trying to capture DTMF tones for routing. I have the modem config files setup according to the instructions. In the log files where the CID and DTMF info should be there is blank quotes. I know the CID info is being passed from the switch because I put a phone with a display on the line, called it and saw the CID info. Does anyone know if I can do this with these modems?

Here is my modem config file:

CountryCode: 1

AreaCode: xxx

FAXNumber: xxxxxxxxxxx

LongDistancePrefix: 1

InternationalPrefix: 011

DialStringRules: etc/dialrules

ServerTracing: 0xFFF

SessionTracing: 11

RecvFileMode: 0600

LogFileMode: 0600

DeviceMode: 0600

RingsBeforeAnswer: 0

SpeakerVolume: off

GettyArgs: "-h %l dx_%s"

LocalIdentifier: "xxxxxxxxxxxxxxxx"

TagLineFont: etc/lutRS18.pcf

TagLineFormat: "From %%l|%c|Page %%P of %%T"

MaxRecvPages: 25

ModemType: Class1 # use this to supply a hint

ModemFlowControl: rtscts # many firmwares have broken software flow control

Class1TMConnectDelay: 400 # counteract quick CONNECT response

# Or with the MT5634ZBA-DID you'll probably need something like...

# ModemReadyCmds: AT*DS1*DD0*DF1*DN4 # enable DTMF-DID, wink-start, 4 digits

# CallIDPattern: "DTMF" # format of AT*DF1

# CallIDAnswerLength: 4 # four DTMF-DID digits then ATA

ModemResetCmds: AT+VCID=1

ModemRingsBeforeResponse: 2

ModemRingResponse: AT+FCLASS=8;H1

CallIDPattern: "NMBR="

CallIDPattern: "NAME="

CallIDPattern: SHIELDED_DTMF

CallIDAnswerLength: 4

ModemAnswerCmd: <delay:100>AT+FCLASS=1;A

Here is the top of the log file.

Dec 15 14:48:47.54: [ 8518]: HylaFAX (tm) Version 4.2.3.1

Dec 15 14:48:47.54: [ 8518]: CallID: "" "" " "

Dec 15 14:48:47.54: [ 8518]: DELAY 1000 ms

Dec 15 14:48:48.54: [ 8518]: <-- [14:AT+FCLASS=1;A\r]

Dec 15 14:48:54.57: [ 8518]: --> [7:CONNECT]

Dec 15 14:48:54.57: [ 8518]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS4'

Dec 15 14:48:54.57: [ 8518]: RECV FAX: begin

Dec 15 14:48:54.57: [ 8518]: <-- data [34]

Dec 15 14:48:54.57: [ 8518]: <-- data [2]

Dec 15 14:48:54.58: [ 8518]: --> [7:CONNECT]

Dec 15 14:48:54.58: [ 8518]: <-- data [23]

Dec 15 14:48:54.58: [ 8518]: <-- data [2]

Dec 15 14:48:54.59: [ 8518]: --> [7:CONNECT]

Dec 15 14:48:54.59: [ 8518]: <-- data [13]

Dec 15 14:48:54.59: [ 8518]: <-- data [2]

Dec 15 14:48:56.86: [ 8518]: --> [2:OK]

Dec 15 14:48:56.86: [ 8518]: <-- [9:AT+FRH=3\r]

Dec 15 14:48:57.00: [ 8518]: --> [7:CONNECT]

Dec 15 14:48:58.40: [ 8518]: --> [2:OK]

Thanks in advance

Warren Johnson

Network Systems Administrator

Jackson General Hospital