[hylafax-users] [Fwd: facsimile not received]

To: hylafax-users@xxxxxxxxxxx
Subject: [hylafax-users] [Fwd: facsimile not received]
From: Chris Jones <c.jones@xxxxxxxxxxxxx>
Date: Mon, 19 Sep 2005 11:23:00 +0100

Hi

I'm looking at the attached log and it seems to suggest something isn't
configured right (there seem to be a lot of command errors coming from
the modem). This is hylafax 4.1.7 on RHEL3 with an Eicon Diva Server PRI
card. I have some other logs too with the same overall error ("T2, page
timed out") which seems to be pretty much the only kind of error I get
for failed received faxes.
Anything I can do to sort this out, or find more information?

Cheers,
-- 
Chris Jones
IT Department
ICM Group



ICM Group Limited is authorised and regulated by the Financial Services 
Authority.
---

--- Begin Message ---

To: FaxMaster@xxxxxxxxxxxxx
Subject: facsimile not received
From: The HylaFAX Receive Agent <fax@xxxxxxxxxxxxx>
Date: Thu, 15 Sep 2005 15:55:50 +0100

An attempt to receive facsimile on ttyds02 failed because:

    T.30 T2 timeout, expected page not received

    ---- Transcript of session follows ----

Sep 15 15:55:29.30: [  990]: SESSION BEGIN 00210076 441273711746
Sep 15 15:55:29.30: [  990]: HylaFAX (tm) Version 4.1.7
Sep 15 15:55:29.30: [  990]: MODEM set XON/XOFF/FLUSH: input ignored, output disabled
Sep 15 15:55:29.30: [  990]: <-- [4:ATA\r]
Sep 15 15:55:33.90: [  990]: --> [7:CONNECT]
Sep 15 15:55:33.90: [  990]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyds02'
Sep 15 15:55:33.90: [  990]: STATE CHANGE: ANSWERING -> RECEIVING
Sep 15 15:55:33.90: [  990]: MODEM input buffering enabled
Sep 15 15:55:33.90: [  990]: RECV FAX: begin
Sep 15 15:55:33.91: [  990]: MODEM input buffering disabled
Sep 15 15:55:33.91: [  990]: <-- HDLC<23:FF C0 02 2A A2 72 1A 82 62 82 2A CA 04 04 04 04 04 04 04 04 04 04 04>
Sep 15 15:55:34.63: [  990]: --> [7:CONNECT]
Sep 15 15:55:34.63: [  990]: <-- HDLC<10:FF C8 01 00 77 5F 01 79 03 C0>
Sep 15 15:55:36.00: [  990]: --> [2:OK]
Sep 15 15:55:36.00: [  990]: <-- [9:AT+FRH=3\r]
Sep 15 15:55:36.34: [  990]: --> [7:CONNECT]
Sep 15 15:55:38.08: [  990]: --> HDLC<25:FF C0 C2 0C 0C 0C CC 04 AC CC EC EC 04 0C 4C 04 2C 2C D4 04 04 04 04 26 41>
Sep 15 15:55:38.08: [  990]: --> [2:OK]
Sep 15 15:55:38.08: [  990]: REMOTE TSI "+44 20 7735 3000"
Sep 15 15:55:38.08: [  990]: <-- [9:AT+FRH=3\r]
Sep 15 15:55:38.08: [  990]: --> [7:CONNECT]
Sep 15 15:55:38.43: [  990]: --> HDLC<12:FF C8 C1 00 45 1F 01 01 01 00 CC D3>
Sep 15 15:55:38.43: [  990]: --> [2:OK]
Sep 15 15:55:38.43: [  990]: REMOTE wants 14400 bit/s
Sep 15 15:55:38.43: [  990]: REMOTE wants page width 1728 pixels in 215 mm
Sep 15 15:55:38.43: [  990]: REMOTE wants unlimited page length
Sep 15 15:55:38.43: [  990]: REMOTE wants 3.85 line/mm
Sep 15 15:55:38.43: [  990]: REMOTE wants 2-D MR
Sep 15 15:55:38.43: [  990]: RECV training at v.17 14400 bit/s
Sep 15 15:55:38.43: [  990]: MODEM set XON/XOFF/DRAIN: input ignored, output generated
Sep 15 15:55:38.43: [  990]: <-- [11:AT+FRM=145\r]
Sep 15 15:55:40.19: [  990]: --> [7:CONNECT]
Sep 15 15:55:41.71: [  990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Sep 15 15:55:41.71: [  990]: RECV: TCF 2730 bytes, 0% non-zero, 2702 zero-run
Sep 15 15:55:41.71: [  990]: --> [10:NO CARRIER]
Sep 15 15:55:41.71: [  990]: DELAY 75 ms
Sep 15 15:55:41.79: [  990]: TRAINING succeeded
Sep 15 15:55:41.79: [  990]: <-- [9:AT+FTH=3\r]
Sep 15 15:55:41.86: [  990]: --> [7:CONNECT]
Sep 15 15:55:41.86: [  990]: <-- HDLC<3:FF C8 21>
Sep 15 15:55:42.51: [  990]: --> [10:NO CARRIER]
Sep 15 15:55:42.51: [  990]: MODEM No carrier
Sep 15 15:55:42.51: [  990]: MODEM input buffering enabled
Sep 15 15:55:42.51: [  990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated
Sep 15 15:55:42.51: [  990]: <-- [11:AT+FRM=146\r]
Sep 15 15:55:42.61: [  990]: --> [5:ERROR]
Sep 15 15:55:42.61: [  990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Sep 15 15:55:42.61: [  990]: MODEM input buffering disabled
Sep 15 15:55:42.81: [  990]: MODEM TIMEOUT: reading line from modem
Sep 15 15:55:42.81: [  990]: MODEM <Timeout>
Sep 15 15:55:42.81: [  990]: <-- [9:AT+FRH=3\r]
Sep 15 15:55:42.81: [  990]: --> [5:ERROR]
Sep 15 15:55:42.81: [  990]: MODEM Command error
Sep 15 15:55:42.81: [  990]: MODEM input buffering enabled
Sep 15 15:55:42.81: [  990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated
Sep 15 15:55:42.81: [  990]: <-- [11:AT+FRM=146\r]
Sep 15 15:55:42.91: [  990]: --> [5:ERROR]
Sep 15 15:55:42.91: [  990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Sep 15 15:55:42.91: [  990]: MODEM input buffering disabled
Sep 15 15:55:43.11: [  990]: MODEM TIMEOUT: reading line from modem
Sep 15 15:55:43.11: [  990]: MODEM <Timeout>
Sep 15 15:55:43.11: [  990]: <-- [9:AT+FRH=3\r]
Sep 15 15:55:43.11: [  990]: --> [5:ERROR]
Sep 15 15:55:43.11: [  990]: MODEM Command error
Sep 15 15:55:43.11: [  990]: MODEM input buffering enabled
Sep 15 15:55:43.11: [  990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated
Sep 15 15:55:43.11: [  990]: <-- [11:AT+FRM=146\r]
Sep 15 15:55:43.21: [  990]: --> [5:ERROR]
Sep 15 15:55:43.21: [  990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Sep 15 15:55:43.21: [  990]: MODEM input buffering disabled
Sep 15 15:55:43.41: [  990]: MODEM TIMEOUT: reading line from modem
Sep 15 15:55:43.41: [  990]: MODEM <Timeout>
Sep 15 15:55:43.41: [  990]: <-- [9:AT+FRH=3\r]
Sep 15 15:55:43.41: [  990]: --> [5:ERROR]
Sep 15 15:55:43.41: [  990]: MODEM Command error
Sep 15 15:55:43.41: [  990]: MODEM input buffering enabled
Sep 15 15:55:43.41: [  990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated
Sep 15 15:55:43.41: [  990]: <-- [11:AT+FRM=146\r]
Sep 15 15:55:43.51: [  990]: --> [5:ERROR]
Sep 15 15:55:43.51: [  990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Sep 15 15:55:43.51: [  990]: MODEM input buffering disabled
Sep 15 15:55:43.71: [  990]: MODEM TIMEOUT: reading line from modem
Sep 15 15:55:43.71: [  990]: MODEM <Timeout>
Sep 15 15:55:43.71: [  990]: <-- [9:AT+FRH=3\r]
Sep 15 15:55:43.71: [  990]: --> [5:ERROR]
Sep 15 15:55:43.71: [  990]: MODEM Command error
Sep 15 15:55:43.71: [  990]: MODEM input buffering enabled
Sep 15 15:55:43.71: [  990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated
Sep 15 15:55:43.71: [  990]: <-- [11:AT+FRM=146\r]
Sep 15 15:55:43.81: [  990]: --> [5:ERROR]
Sep 15 15:55:43.81: [  990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Sep 15 15:55:43.81: [  990]: MODEM input buffering disabled
Sep 15 15:55:44.01: [  990]: MODEM TIMEOUT: reading line from modem
Sep 15 15:55:44.01: [  990]: MODEM <Timeout>
Sep 15 15:55:44.01: [  990]: <-- [9:AT+FRH=3\r]
Sep 15 15:55:44.01: [  990]: --> [5:ERROR]
Sep 15 15:55:44.01: [  990]: MODEM Command error
Sep 15 15:55:44.01: [  990]: MODEM input buffering enabled
Sep 15 15:55:44.01: [  990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated
Sep 15 15:55:44.01: [  990]: <-- [11:AT+FRM=146\r]
Sep 15 15:55:44.11: [  990]: --> [5:ERROR]
Sep 15 15:55:44.11: [  990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Sep 15 15:55:44.11: [  990]: MODEM input buffering disabled
Sep 15 15:55:44.31: [  990]: MODEM TIMEOUT: reading line from modem
Sep 15 15:55:44.31: [  990]: MODEM <Timeout>
Sep 15 15:55:44.31: [  990]: <-- [9:AT+FRH=3\r]
Sep 15 15:55:44.31: [  990]: --> [5:ERROR]
Sep 15 15:55:44.31: [  990]: MODEM Command error
Sep 15 15:55:44.31: [  990]: MODEM input buffering enabled
Sep 15 15:55:44.31: [  990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated
Sep 15 15:55:44.31: [  990]: <-- [11:AT+FRM=146\r]
Sep 15 15:55:44.41: [  990]: --> [5:ERROR]
Sep 15 15:55:44.41: [  990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Sep 15 15:55:44.41: [  990]: MODEM input buffering disabled
Sep 15 15:55:44.61: [  990]: MODEM TIMEOUT: reading line from modem
Sep 15 15:55:44.61: [  990]: MODEM <Timeout>
Sep 15 15:55:44.61: [  990]: <-- [9:AT+FRH=3\r]
Sep 15 15:55:44.61: [  990]: --> [5:ERROR]
Sep 15 15:55:44.61: [  990]: MODEM Command error
Sep 15 15:55:44.61: [  990]: MODEM input buffering enabled
Sep 15 15:55:44.61: [  990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated
Sep 15 15:55:44.61: [  990]: <-- [11:AT+FRM=146\r]
Sep 15 15:55:44.71: [  990]: --> [5:ERROR]
Sep 15 15:55:44.71: [  990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Sep 15 15:55:44.71: [  990]: MODEM input buffering disabled
Sep 15 15:55:44.91: [  990]: MODEM TIMEOUT: reading line from modem
Sep 15 15:55:44.91: [  990]: MODEM <Timeout>
Sep 15 15:55:44.91: [  990]: <-- [9:AT+FRH=3\r]
Sep 15 15:55:44.91: [  990]: --> [5:ERROR]
Sep 15 15:55:44.91: [  990]: MODEM Command error
Sep 15 15:55:44.91: [  990]: MODEM input buffering enabled
Sep 15 15:55:44.91: [  990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated
Sep 15 15:55:44.91: [  990]: <-- [11:AT+FRM=146\r]
Sep 15 15:55:45.01: [  990]: --> [5:ERROR]
Sep 15 15:55:45.01: [  990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Sep 15 15:55:45.01: [  990]: MODEM input buffering disabled
Sep 15 15:55:45.21: [  990]: MODEM TIMEOUT: reading line from modem
Sep 15 15:55:45.21: [  990]: MODEM <Timeout>
Sep 15 15:55:45.21: [  990]: <-- [9:AT+FRH=3\r]
Sep 15 15:55:45.21: [  990]: --> [5:ERROR]
Sep 15 15:55:45.21: [  990]: MODEM Command error
Sep 15 15:55:45.21: [  990]: MODEM input buffering enabled
Sep 15 15:55:45.21: [  990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated
Sep 15 15:55:45.21: [  990]: <-- [11:AT+FRM=146\r]
Sep 15 15:55:45.31: [  990]: --> [5:ERROR]
Sep 15 15:55:45.31: [  990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Sep 15 15:55:45.31: [  990]: MODEM input buffering disabled
Sep 15 15:55:45.51: [  990]: MODEM TIMEOUT: reading line from modem
Sep 15 15:55:45.51: [  990]: MODEM <Timeout>
Sep 15 15:55:45.51: [  990]: <-- [9:AT+FRH=3\r]
Sep 15 15:55:45.51: [  990]: --> [5:ERROR]
Sep 15 15:55:45.51: [  990]: MODEM Command error
Sep 15 15:55:45.51: [  990]: MODEM input buffering enabled
Sep 15 15:55:45.51: [  990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated
Sep 15 15:55:45.51: [  990]: <-- [11:AT+FRM=146\r]
Sep 15 15:55:45.61: [  990]: --> [5:ERROR]
Sep 15 15:55:45.61: [  990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Sep 15 15:55:45.61: [  990]: MODEM input buffering disabled
Sep 15 15:55:45.81: [  990]: MODEM TIMEOUT: reading line from modem
Sep 15 15:55:45.81: [  990]: MODEM <Timeout>
Sep 15 15:55:45.81: [  990]: <-- [9:AT+FRH=3\r]
Sep 15 15:55:45.81: [  990]: --> [5:ERROR]
Sep 15 15:55:45.81: [  990]: MODEM Command error
Sep 15 15:55:45.81: [  990]: MODEM input buffering enabled
Sep 15 15:55:45.81: [  990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated
Sep 15 15:55:45.81: [  990]: <-- [11:AT+FRM=146\r]
Sep 15 15:55:45.91: [  990]: --> [5:ERROR]
Sep 15 15:55:45.91: [  990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Sep 15 15:55:45.91: [  990]: MODEM input buffering disabled
Sep 15 15:55:46.11: [  990]: MODEM TIMEOUT: reading line from modem
Sep 15 15:55:46.11: [  990]: MODEM <Timeout>
Sep 15 15:55:46.11: [  990]: <-- [9:AT+FRH=3\r]
Sep 15 15:55:46.11: [  990]: --> [5:ERROR]
Sep 15 15:55:46.11: [  990]: MODEM Command error
Sep 15 15:55:46.11: [  990]: MODEM input buffering enabled
Sep 15 15:55:46.11: [  990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated
Sep 15 15:55:46.11: [  990]: <-- [11:AT+FRM=146\r]
Sep 15 15:55:46.21: [  990]: --> [5:ERROR]
Sep 15 15:55:46.21: [  990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Sep 15 15:55:46.21: [  990]: MODEM input buffering disabled
Sep 15 15:55:46.41: [  990]: MODEM TIMEOUT: reading line from modem
Sep 15 15:55:46.41: [  990]: MODEM <Timeout>
Sep 15 15:55:46.41: [  990]: <-- [9:AT+FRH=3\r]
Sep 15 15:55:46.41: [  990]: --> [5:ERROR]
Sep 15 15:55:46.41: [  990]: MODEM Command error
Sep 15 15:55:46.41: [  990]: MODEM input buffering enabled
Sep 15 15:55:46.41: [  990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated
Sep 15 15:55:46.41: [  990]: <-- [11:AT+FRM=146\r]
Sep 15 15:55:46.51: [  990]: --> [5:ERROR]
Sep 15 15:55:46.51: [  990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Sep 15 15:55:46.51: [  990]: MODEM input buffering disabled
Sep 15 15:55:46.71: [  990]: MODEM TIMEOUT: reading line from modem
Sep 15 15:55:46.71: [  990]: MODEM <Timeout>
Sep 15 15:55:46.71: [  990]: <-- [9:AT+FRH=3\r]
Sep 15 15:55:46.71: [  990]: --> [5:ERROR]
Sep 15 15:55:46.71: [  990]: MODEM Command error
Sep 15 15:55:46.71: [  990]: MODEM input buffering enabled
Sep 15 15:55:46.71: [  990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated
Sep 15 15:55:46.71: [  990]: <-- [11:AT+FRM=146\r]
Sep 15 15:55:46.81: [  990]: --> [5:ERROR]
Sep 15 15:55:46.81: [  990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Sep 15 15:55:46.81: [  990]: MODEM input buffering disabled
Sep 15 15:55:47.01: [  990]: MODEM TIMEOUT: reading line from modem
Sep 15 15:55:47.01: [  990]: MODEM <Timeout>
Sep 15 15:55:47.01: [  990]: <-- [9:AT+FRH=3\r]
Sep 15 15:55:47.01: [  990]: --> [5:ERROR]
Sep 15 15:55:47.01: [  990]: MODEM Command error
Sep 15 15:55:47.01: [  990]: MODEM input buffering enabled
Sep 15 15:55:47.01: [  990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated
Sep 15 15:55:47.01: [  990]: <-- [11:AT+FRM=146\r]
Sep 15 15:55:47.11: [  990]: --> [5:ERROR]
Sep 15 15:55:47.11: [  990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Sep 15 15:55:47.11: [  990]: MODEM input buffering disabled
Sep 15 15:55:47.31: [  990]: MODEM TIMEOUT: reading line from modem
Sep 15 15:55:47.31: [  990]: MODEM <Timeout>
Sep 15 15:55:47.31: [  990]: <-- [9:AT+FRH=3\r]
Sep 15 15:55:47.31: [  990]: --> [5:ERROR]
Sep 15 15:55:47.31: [  990]: MODEM Command error
Sep 15 15:55:47.31: [  990]: MODEM input buffering enabled
Sep 15 15:55:47.31: [  990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated
Sep 15 15:55:47.31: [  990]: <-- [11:AT+FRM=146\r]
Sep 15 15:55:47.41: [  990]: --> [5:ERROR]
Sep 15 15:55:47.41: [  990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Sep 15 15:55:47.41: [  990]: MODEM input buffering disabled
Sep 15 15:55:47.61: [  990]: MODEM TIMEOUT: reading line from modem
Sep 15 15:55:47.61: [  990]: MODEM <Timeout>
Sep 15 15:55:47.61: [  990]: <-- [9:AT+FRH=3\r]
Sep 15 15:55:47.61: [  990]: --> [5:ERROR]
Sep 15 15:55:47.61: [  990]: MODEM Command error
Sep 15 15:55:47.61: [  990]: MODEM input buffering enabled
Sep 15 15:55:47.61: [  990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated
Sep 15 15:55:47.61: [  990]: <-- [11:AT+FRM=146\r]
Sep 15 15:55:47.71: [  990]: --> [5:ERROR]
Sep 15 15:55:47.71: [  990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Sep 15 15:55:47.71: [  990]: MODEM input buffering disabled
Sep 15 15:55:47.91: [  990]: MODEM TIMEOUT: reading line from modem
Sep 15 15:55:47.91: [  990]: MODEM <Timeout>
Sep 15 15:55:47.91: [  990]: <-- [9:AT+FRH=3\r]
Sep 15 15:55:47.91: [  990]: --> [5:ERROR]
Sep 15 15:55:47.91: [  990]: MODEM Command error
Sep 15 15:55:47.91: [  990]: MODEM input buffering enabled
Sep 15 15:55:47.91: [  990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated
Sep 15 15:55:47.91: [  990]: <-- [11:AT+FRM=146\r]
Sep 15 15:55:48.01: [  990]: --> [5:ERROR]
Sep 15 15:55:48.01: [  990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Sep 15 15:55:48.01: [  990]: MODEM input buffering disabled
Sep 15 15:55:48.21: [  990]: MODEM TIMEOUT: reading line from modem
Sep 15 15:55:48.21: [  990]: MODEM <Timeout>
Sep 15 15:55:48.21: [  990]: <-- [9:AT+FRH=3\r]
Sep 15 15:55:48.21: [  990]: --> [5:ERROR]
Sep 15 15:55:48.21: [  990]: MODEM Command error
Sep 15 15:55:48.21: [  990]: MODEM input buffering enabled
Sep 15 15:55:48.21: [  990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated
Sep 15 15:55:48.21: [  990]: <-- [11:AT+FRM=146\r]
Sep 15 15:55:48.31: [  990]: --> [5:ERROR]
Sep 15 15:55:48.31: [  990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Sep 15 15:55:48.31: [  990]: MODEM input buffering disabled
Sep 15 15:55:48.51: [  990]: MODEM TIMEOUT: reading line from modem
Sep 15 15:55:48.51: [  990]: MODEM <Timeout>
Sep 15 15:55:48.51: [  990]: <-- [9:AT+FRH=3\r]
Sep 15 15:55:48.51: [  990]: --> [5:ERROR]
Sep 15 15:55:48.51: [  990]: MODEM Command error
Sep 15 15:55:48.51: [  990]: MODEM input buffering enabled
Sep 15 15:55:48.51: [  990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated
Sep 15 15:55:48.51: [  990]: <-- [11:AT+FRM=146\r]
Sep 15 15:55:48.61: [  990]: --> [5:ERROR]
Sep 15 15:55:48.61: [  990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Sep 15 15:55:48.61: [  990]: MODEM input buffering disabled
Sep 15 15:55:48.81: [  990]: MODEM TIMEOUT: reading line from modem
Sep 15 15:55:48.81: [  990]: MODEM <Timeout>
Sep 15 15:55:48.81: [  990]: <-- [9:AT+FRH=3\r]
Sep 15 15:55:48.81: [  990]: --> [5:ERROR]
Sep 15 15:55:48.81: [  990]: MODEM Command error
Sep 15 15:55:48.81: [  990]: MODEM input buffering enabled
Sep 15 15:55:48.81: [  990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated
Sep 15 15:55:48.81: [  990]: <-- [11:AT+FRM=146\r]
Sep 15 15:55:48.91: [  990]: --> [5:ERROR]
Sep 15 15:55:48.91: [  990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Sep 15 15:55:48.91: [  990]: MODEM input buffering disabled
Sep 15 15:55:49.11: [  990]: MODEM TIMEOUT: reading line from modem
Sep 15 15:55:49.11: [  990]: MODEM <Timeout>
Sep 15 15:55:49.11: [  990]: <-- [9:AT+FRH=3\r]
Sep 15 15:55:49.11: [  990]: --> [5:ERROR]
Sep 15 15:55:49.11: [  990]: MODEM Command error
Sep 15 15:55:49.11: [  990]: MODEM input buffering enabled
Sep 15 15:55:49.11: [  990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated
Sep 15 15:55:49.11: [  990]: <-- [11:AT+FRM=146\r]
Sep 15 15:55:49.21: [  990]: --> [5:ERROR]
Sep 15 15:55:49.21: [  990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Sep 15 15:55:49.21: [  990]: MODEM input buffering disabled
Sep 15 15:55:49.41: [  990]: MODEM TIMEOUT: reading line from modem
Sep 15 15:55:49.41: [  990]: MODEM <Timeout>
Sep 15 15:55:49.41: [  990]: <-- [9:AT+FRH=3\r]
Sep 15 15:55:49.41: [  990]: --> [5:ERROR]
Sep 15 15:55:49.41: [  990]: MODEM Command error
Sep 15 15:55:49.41: [  990]: MODEM input buffering enabled
Sep 15 15:55:49.41: [  990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated
Sep 15 15:55:49.41: [  990]: <-- [11:AT+FRM=146\r]
Sep 15 15:55:49.51: [  990]: --> [5:ERROR]
Sep 15 15:55:49.51: [  990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Sep 15 15:55:49.51: [  990]: MODEM input buffering disabled
Sep 15 15:55:49.71: [  990]: MODEM TIMEOUT: reading line from modem
Sep 15 15:55:49.71: [  990]: MODEM <Timeout>
Sep 15 15:55:49.71: [  990]: <-- [9:AT+FRH=3\r]
Sep 15 15:55:49.71: [  990]: --> [5:ERROR]
Sep 15 15:55:49.71: [  990]: MODEM Command error
Sep 15 15:55:49.71: [  990]: MODEM input buffering enabled
Sep 15 15:55:49.71: [  990]: MODEM set XON/XOFF/FLUSH: input ignored, output generated
Sep 15 15:55:49.71: [  990]: <-- [11:AT+FRM=146\r]
Sep 15 15:55:49.81: [  990]: --> [5:ERROR]
Sep 15 15:55:49.81: [  990]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Sep 15 15:55:49.81: [  990]: MODEM input buffering disabled
Sep 15 15:55:50.01: [  990]: MODEM TIMEOUT: reading line from modem
Sep 15 15:55:50.01: [  990]: MODEM <Timeout>
Sep 15 15:55:50.01: [  990]: <-- [9:AT+FRH=3\r]
Sep 15 15:55:50.01: [  990]: --> [5:ERROR]
Sep 15 15:55:50.01: [  990]: MODEM Command error
Sep 15 15:55:50.01: [  990]: RECV FAX (00210076): recvq/fax45904.tif from +44 20 7735 3000, route to <unspecified>, 0 pages in 0:17
Sep 15 15:55:50.01: [  990]: RECV FAX: T.30 T2 timeout, expected page not received
Sep 15 15:55:50.01: [  990]: <-- [9:AT+FTH=3\r]
Sep 15 15:55:50.01: [  990]: --> [5:ERROR]
Sep 15 15:55:50.01: [  990]: MODEM input buffering enabled
Sep 15 15:55:50.01: [  990]: RECV FAX (00210076): session with +44 20 7735 3000 terminated abnormally: T.30 T2 timeout, expected page not received
Sep 15 15:55:50.01: [  990]: RECV FAX: bin/faxrcvd "recvq/fax45904.tif" "ttyds02" "00210076" "T.30 T2 timeout, expected page not received" "RING CID:  DAD: 232288" "RING CID:  DAD: 232288"

--- End Message ---

Follow-Ups:
- [hylafax-users] Viewing faxes - With WHFC or otherwise
  - From: James McCall
- Re: [hylafax-users] [Fwd: facsimile not received]
  - From: Lee Howard

Prev by Date: [hylafax-users] WHFC Fehler beim Zugriff auf doneq
Next by Date: [hylafax-users] Viewing faxes - With WHFC or otherwise
Previous by thread: [hylafax-users] WHFC Fehler beim Zugriff auf doneq
Next by thread: [hylafax-users] Viewing faxes - With WHFC or otherwise
Index(es):
- Main
- Thread

Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services