|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] Ring detected without successful handshake
Well, that didn't yield any more information in the
log, perhaps I'm missing something. I switched to
class 1.0 with the SessionTracing set to 0xFFF and got
the same end result with this log:
Sep 14 13:10:24.47: [12703]: SESSION BEGIN 000000011
xxxxxxxxxx
Sep 14 13:10:24.47: [12703]: HylaFAX (tm) Version
4.2.1
Sep 14 13:10:24.47: [12703]: <-- [4:ATA\r]
Sep 14 13:10:38.15: [12703]: --> [7:CONNECT]
Sep 14 13:10:38.15: [12703]: ANSWER: FAX CONNECTION
DEVICE '/dev/ttyS14'
Sep 14 13:10:38.15: [12703]: STATE CHANGE: ANSWERING
-> RECEIVING
Sep 14 13:10:38.15: [12703]: MODEM input buffering
enabled
Sep 14 13:10:38.15: [12703]: RECV FAX: begin
Sep 14 13:10:38.15: [12703]: MODEM input buffering
disabled
Sep 14 13:10:38.15: [12703]: <-- HDLC<32:FF C0 04 AD
00 55 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E
CE 96 F6 76 04 2C 74 4C 74 8C>
Sep 14 13:10:38.15: [12703]: <-- data [32]
Sep 14 13:10:38.15: [12703]: <-- data [2]
Sep 14 13:10:38.15: [12703]: --> [7:CONNECT]
Sep 14 13:10:38.15: [12703]: <-- HDLC<23:FF C0 02 EC
04 9E B6 A6 26 86 C6 82 04 9E C6 86 E6 A6 32 04 04 04
04>
Sep 14 13:10:38.15: [12703]: <-- data [23]
Sep 14 13:10:38.15: [12703]: <-- data [2]
Sep 14 13:10:38.16: [12703]: --> [7:CONNECT]
Sep 14 13:10:38.16: [12703]: <-- HDLC<10:FF C8 01 04
76 5F 23 01 FB C0>
Sep 14 13:10:38.16: [12703]: <-- data [10]
Sep 14 13:10:38.16: [12703]: <-- data [2]
Sep 14 13:10:40.35: [12703]: --> [2:OK]
Sep 14 13:10:40.35: [12703]: <-- [9:AT+FRH=3\r]
Sep 14 13:10:40.37: [12703]: --> [7:CONNECT]
Sep 14 13:10:41.01: [12703]: --> HDLC<16:FF C0 04 00
00 6A AA AA 00 31 09 01 48 D0 13 2C>
Sep 14 13:10:41.01: [12703]: --> [2:OK]
Sep 14 13:10:41.01: [12703]: <-- [9:AT+FRH=3\r]
Sep 14 13:10:41.02: [12703]: --> [7:CONNECT]
Sep 14 13:10:41.71: [12703]: --> HDLC<25:FF C0 02 EC
EC 0C CC EC 0C 2C 1C EC 6C 8C 04 04 04 04 04 04 04 04
04 3A 40>
Sep 14 13:10:41.71: [12703]: --> [2:OK]
Sep 14 13:10:41.71: [12703]: <-- [9:AT+FRH=3\r]
Sep 14 13:10:41.72: [12703]: --> [7:CONNECT]
Sep 14 13:10:42.14: [12703]: --> HDLC<15:FF C8 01 04
77 1D 23 01 89 01 01 19 00 2B 8F>
Sep 14 13:10:42.14: [12703]: --> [2:OK]
Sep 14 13:10:42.14: [12703]: DELAY 1500 ms
Sep 14 13:10:43.64: [12703]: <-- [9:AT+FTH=3\r]
Sep 14 13:10:44.60: [12703]: --> [7:CONNECT]
Sep 14 13:10:44.60: [12703]: <-- HDLC<32:FF C0 04 AD
00 55 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E
CE 96 F6 76 04 2C 74 4C 74 8C>
Sep 14 13:10:44.60: [12703]: <-- data [32]
Sep 14 13:10:44.60: [12703]: <-- data [2]
Sep 14 13:10:44.60: [12703]: --> [7:CONNECT]
Sep 14 13:10:44.60: [12703]: <-- HDLC<23:FF C0 02 EC
04 9E B6 A6 26 86 C6 82 04 9E C6 86 E6 A6 32 04 04 04
04>
Sep 14 13:10:44.61: [12703]: <-- data [23]
Sep 14 13:10:44.61: [12703]: <-- data [2]
Sep 14 13:10:44.61: [12703]: --> [7:CONNECT]
Sep 14 13:10:44.61: [12703]: <-- HDLC<10:FF C8 01 04
76 5F 23 01 FB C0>
Sep 14 13:10:44.61: [12703]: <-- data [10]
Sep 14 13:10:44.61: [12703]: <-- data [2]
Sep 14 13:10:46.82: [12703]: --> [2:OK]
Sep 14 13:10:46.82: [12703]: <-- [9:AT+FRH=3\r]
Sep 14 13:10:46.86: [12703]: --> [7:CONNECT]
Sep 14 13:10:48.32: [12703]: --> HDLC<16:FF C0 04 00
00 6A AA AA 00 31 09 01 48 D0 13 2C>
Sep 14 13:10:48.32: [12703]: --> [2:OK]
Sep 14 13:10:48.32: [12703]: <-- [9:AT+FRH=3\r]
Sep 14 13:10:48.33: [12703]: --> [7:CONNECT]
Sep 14 13:10:49.02: [12703]: --> HDLC<25:FF C0 02 EC
EC 0C CC EC 0C 2C 1C EC 6C 8C 04 04 04 04 04 04 04 04
04 3A 40>
Sep 14 13:10:49.02: [12703]: --> [2:OK]
Sep 14 13:10:49.02: [12703]: <-- [9:AT+FRH=3\r]
Sep 14 13:10:49.03: [12703]: --> [7:CONNECT]
Sep 14 13:10:49.46: [12703]: --> HDLC<15:FF C8 01 04
77 1D 23 01 89 01 01 19 00 2B 8F>
Sep 14 13:10:49.46: [12703]: --> [2:OK]
Sep 14 13:10:49.46: [12703]: DELAY 1500 ms
Sep 14 13:10:50.95: [12703]: <-- [9:AT+FTH=3\r]
Sep 14 13:10:51.91: [12703]: --> [7:CONNECT]
Sep 14 13:10:51.91: [12703]: <-- HDLC<32:FF C0 04 AD
00 55 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E
CE 96 F6 76 04 2C 74 4C 74 8C>
Sep 14 13:10:51.91: [12703]: <-- data [32]
Sep 14 13:10:51.91: [12703]: <-- data [2]
Sep 14 13:10:51.91: [12703]: --> [7:CONNECT]
Sep 14 13:10:51.91: [12703]: <-- HDLC<23:FF C0 02 EC
04 9E B6 A6 26 86 C6 82 04 9E C6 86 E6 A6 32 04 04 04
04>
Sep 14 13:10:51.92: [12703]: <-- data [23]
Sep 14 13:10:51.92: [12703]: <-- data [2]
Sep 14 13:10:51.92: [12703]: --> [7:CONNECT]
Sep 14 13:10:51.92: [12703]: <-- HDLC<10:FF C8 01 04
76 5F 23 01 FB C0>
Sep 14 13:10:51.92: [12703]: <-- data [10]
Sep 14 13:10:51.92: [12703]: <-- data [2]
Sep 14 13:10:54.13: [12703]: --> [2:OK]
Sep 14 13:10:54.13: [12703]: <-- [9:AT+FRH=3\r]
Sep 14 13:10:54.17: [12703]: --> [7:CONNECT]
Sep 14 13:10:55.63: [12703]: --> HDLC<16:FF C0 04 00
00 6A AA AA 00 31 09 01 48 D0 13 2C>
Sep 14 13:10:55.63: [12703]: --> [2:OK]
Sep 14 13:10:55.63: [12703]: <-- [9:AT+FRH=3\r]
Sep 14 13:10:55.63: [12703]: --> [7:CONNECT]
Sep 14 13:10:56.33: [12703]: --> HDLC<25:FF C0 02 EC
EC 0C CC EC 0C 2C 1C EC 6C 8C 04 04 04 04 04 04 04 04
04 3A 40>
Sep 14 13:10:56.33: [12703]: --> [2:OK]
Sep 14 13:10:56.33: [12703]: <-- [9:AT+FRH=3\r]
Sep 14 13:10:56.33: [12703]: --> [7:CONNECT]
Sep 14 13:10:56.76: [12703]: --> HDLC<15:FF C8 01 04
77 1D 23 01 89 01 01 19 00 2B 8F>
Sep 14 13:10:56.76: [12703]: --> [2:OK]
Sep 14 13:10:56.76: [12703]: DELAY 1500 ms
Sep 14 13:10:58.26: [12703]: <-- [9:AT+FTH=3\r]
Sep 14 13:10:59.22: [12703]: --> [7:CONNECT]
Sep 14 13:10:59.22: [12703]: <-- HDLC<32:FF C0 04 AD
00 55 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E
CE 96 F6 76 04 2C 74 4C 74 8C>
Sep 14 13:10:59.22: [12703]: <-- data [32]
Sep 14 13:10:59.22: [12703]: <-- data [2]
Sep 14 13:10:59.22: [12703]: --> [7:CONNECT]
Sep 14 13:10:59.22: [12703]: <-- HDLC<23:FF C0 02 EC
04 9E B6 A6 26 86 C6 82 04 9E C6 86 E6 A6 32 04 04 04
04>
Sep 14 13:10:59.22: [12703]: <-- data [23]
Sep 14 13:10:59.22: [12703]: <-- data [2]
Sep 14 13:10:59.23: [12703]: --> [7:CONNECT]
Sep 14 13:10:59.23: [12703]: <-- HDLC<10:FF C8 01 04
76 5F 23 01 FB C0>
Sep 14 13:10:59.23: [12703]: <-- data [10]
Sep 14 13:10:59.23: [12703]: <-- data [2]
Sep 14 13:11:01.44: [12703]: --> [2:OK]
Sep 14 13:11:01.44: [12703]: <-- [9:AT+FRH=3\r]
Sep 14 13:11:04.11: [12703]: --> [7:CONNECT]
Sep 14 13:11:05.60: [12703]: --> HDLC<16:FF C0 04 00
00 6A AA AA 00 31 09 01 48 D0 13 2C>
Sep 14 13:11:05.60: [12703]: --> [2:OK]
Sep 14 13:11:05.60: [12703]: <-- [9:AT+FRH=3\r]
Sep 14 13:11:05.61: [12703]: --> [7:CONNECT]
Sep 14 13:11:06.30: [12703]: --> HDLC<25:FF C0 02 EC
EC 0C CC EC 0C 2C 1C EC 6C 8C 04 04 04 04 04 04 04 04
04 3A 40>
Sep 14 13:11:06.30: [12703]: --> [2:OK]
Sep 14 13:11:06.30: [12703]: <-- [9:AT+FRH=3\r]
Sep 14 13:11:06.31: [12703]: --> [7:CONNECT]
Sep 14 13:11:06.74: [12703]: --> HDLC<15:FF C8 01 04
77 1D 23 01 89 01 01 19 00 2B 8F>
Sep 14 13:11:06.74: [12703]: --> [2:OK]
Sep 14 13:11:06.74: [12703]: DELAY 1500 ms
Sep 14 13:11:08.24: [12703]: <-- [9:AT+FTH=3\r]
Sep 14 13:11:09.19: [12703]: --> [7:CONNECT]
Sep 14 13:11:09.19: [12703]: <-- HDLC<32:FF C0 04 AD
00 55 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E
CE 96 F6 76 04 2C 74 4C 74 8C>
Sep 14 13:11:09.19: [12703]: <-- data [32]
Sep 14 13:11:09.19: [12703]: <-- data [2]
Sep 14 13:11:09.20: [12703]: --> [7:CONNECT]
Sep 14 13:11:09.20: [12703]: <-- HDLC<23:FF C0 02 EC
04 9E B6 A6 26 86 C6 82 04 9E C6 86 E6 A6 32 04 04 04
04>
Sep 14 13:11:09.20: [12703]: <-- data [23]
Sep 14 13:11:09.20: [12703]: <-- data [2]
Sep 14 13:11:09.20: [12703]: --> [7:CONNECT]
Sep 14 13:11:09.20: [12703]: <-- HDLC<10:FF C8 01 04
76 5F 23 01 FB C0>
Sep 14 13:11:09.20: [12703]: <-- data [10]
Sep 14 13:11:09.20: [12703]: <-- data [2]
Sep 14 13:11:11.41: [12703]: --> [2:OK]
Sep 14 13:11:11.41: [12703]: <-- [9:AT+FRH=3\r]
Sep 14 13:11:11.44: [12703]: --> [7:CONNECT]
Sep 14 13:11:12.89: [12703]: --> HDLC<16:FF C0 04 00
00 6A AA AA 00 31 09 01 48 D0 13 2C>
Sep 14 13:11:12.89: [12703]: --> [2:OK]
Sep 14 13:11:12.89: [12703]: <-- [9:AT+FRH=3\r]
Sep 14 13:11:12.90: [12703]: --> [7:CONNECT]
Sep 14 13:11:13.59: [12703]: --> HDLC<25:FF C0 02 EC
EC 0C CC EC 0C 2C 1C EC 6C 8C 04 04 04 04 04 04 04 04
04 3A 40>
Sep 14 13:11:13.59: [12703]: --> [2:OK]
Sep 14 13:11:13.59: [12703]: <-- [9:AT+FRH=3\r]
Sep 14 13:11:13.60: [12703]: --> [7:CONNECT]
Sep 14 13:11:14.03: [12703]: --> HDLC<15:FF C8 01 04
77 1D 23 01 89 01 01 19 00 2B 8F>
Sep 14 13:11:14.03: [12703]: --> [2:OK]
Sep 14 13:11:14.03: [12703]: DELAY 1500 ms
Sep 14 13:11:15.53: [12703]: <-- [9:AT+FTH=3\r]
Sep 14 13:11:16.48: [12703]: --> [7:CONNECT]
Sep 14 13:11:16.48: [12703]: <-- HDLC<32:FF C0 04 AD
00 55 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E
CE 96 F6 76 04 2C 74 4C 74 8C>
Sep 14 13:11:16.48: [12703]: <-- data [32]
Sep 14 13:11:16.48: [12703]: <-- data [2]
Sep 14 13:11:16.49: [12703]: --> [7:CONNECT]
Sep 14 13:11:16.49: [12703]: <-- HDLC<23:FF C0 02 EC
04 9E B6 A6 26 86 C6 82 04 9E C6 86 E6 A6 32 04 04 04
04>
Sep 14 13:11:16.49: [12703]: <-- data [23]
Sep 14 13:11:16.49: [12703]: <-- data [2]
Sep 14 13:11:16.49: [12703]: --> [7:CONNECT]
Sep 14 13:11:16.49: [12703]: <-- HDLC<10:FF C8 01 04
76 5F 23 01 FB C0>
Sep 14 13:11:16.49: [12703]: <-- data [10]
Sep 14 13:11:16.49: [12703]: <-- data [2]
Sep 14 13:11:18.70: [12703]: --> [2:OK]
Sep 14 13:11:18.70: [12703]: <-- [9:AT+FRH=3\r]
Sep 14 13:11:21.80: [12703]: --> [0:]
Sep 14 13:11:21.80: [12703]: MODEM <Empty line>
Sep 14 13:11:21.80: [12703]: MODEM TIMEOUT: waiting
for v.21 carrier
Sep 14 13:11:21.80: [12703]: <-- data [1]
Sep 14 13:11:21.81: [12703]: --> [2:]
Sep 14 13:11:21.81: [12703]: --> [2:OK]
Sep 14 13:11:21.81: [12703]: RECV FAX: RSPREC invalid
response received
Sep 14 13:11:21.81: [12703]: RECV FAX: end
Sep 14 13:11:21.81: [12703]: SESSION END
--- Lee Howard <faxguy@xxxxxxxxxxxxxxxx> wrote:
> I think that you need to turn up your SessionTracing
> to something like
> 0xFFF.
>
> Lee.
>
>
> Tim Paulus wrote:
>
> >In general, I can send and receive faxes. However,
> >one fax that I attempt to send to my hylafax server
> >always fails. Here's the log:
> >
> >Sep 13 13:24:38.64: [ 2101]: SESSION BEGIN
> 000000004
> >16784073077
> >Sep 13 13:24:38.64: [ 2101]: HylaFAX (tm) Version
> >4.2.1
> >Sep 13 13:24:38.64: [ 2101]: <--
> >[20:AT+FCC=1,,,,,,,,0;A\r]
> >Sep 13 13:25:30.51: [ 2101]: --> [6:+FHS:0]
> >Sep 13 13:25:30.51: [ 2101]: REMOTE HANGUP: Normal
> and
> >proper end of connection (code 0)
> >Sep 13 13:25:30.51: [ 2101]: ANSWER: Ring detected
> >without successful handshake
> >Sep 13 13:25:30.51: [ 2101]: SESSION END
> >
> >Notice the long delay between +FCC and +FHS.
> >
> >I have access to this sending fax machine (it's a
> fax
> >store and forward server) and I can fax from it to
> >another fax machine just fine, I just can't fax
> from
> >it to my hylafax server.
> >
> >Hylafax version: 4.2.1
> >OS: Redhat Fedora Core 4, kernel 2.6.11-1.1369_FC4
> >Modem: Multi-tech Systems MT5634ZPX-PCI-U
> >
> >I can't seem to make any progress on this one. It
> >looks to me like the modems initiate a connection
> but
> >the sending modem never acknowledges the connection
> >and eventually hangs up. Has anyone seen this
> before?
> >
> >
> >
> >
> >__________________________________
> >Yahoo! Mail - PC Magazine Editors' Choice 2005
> >http://mail.yahoo.com
> >
> >____________________ HylaFAX(tm) Users Mailing List
> _______________________
> > To subscribe/unsubscribe, click
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
> > On UNIX: mail -s unsubscribe
> hylafax-users-request@xxxxxxxxxxx < /dev/null
> > *To learn about expensive HylaFAX(tm) support,
> mail sales@xxxxxxxxx*
> >
> >
> >
>
>
> ____________________ HylaFAX(tm) Users Mailing List
> _______________________
> To subscribe/unsubscribe, click
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe
> hylafax-users-request@xxxxxxxxxxx < /dev/null
> *To learn about commercial HylaFAX(tm) support,
> mail sales@xxxxxxxxx*
>
>
__________________________________
Yahoo! Mail - PC Magazine Editors' Choice 2005
http://mail.yahoo.com
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
