Re: [hylafax-users] Ring detected without successful handshake

To: hylafax-users@xxxxxxxxxxx
Subject: Re: [hylafax-users] Ring detected without successful handshake
From: Stephen Carville <stephen@xxxxxxxxxxxxxx>
Cc: Tim Paulus <lacobrts@xxxxxxxxx>
Date: Wed, 14 Sep 2005 10:30:30 -0700

Tim Paulus wrote:

Well, that didn't yield any more information in the
log, perhaps I'm missing something.  I switched to
class 1.0 with the SessionTracing set to 0xFFF and got
the same end result with this log:

What version of hylafax? I find with 4.2.2beta5 that a reatart of the server does not reset the faxgetty's. If I want to make a configuration change, I have to stop hylafax, edit /etc/inittab and comment out the faxgetty lines, do an 'init q', edit again to restore the original lines, and do 'init q' again. Then start hylafax.

Sep 14 13:10:24.47: [12703]: SESSION BEGIN 000000011 xxxxxxxxxx Sep 14 13:10:24.47: [12703]: HylaFAX (tm) Version 4.2.1 Sep 14 13:10:24.47: [12703]: <-- [4:ATA\r] Sep 14 13:10:38.15: [12703]: --> [7:CONNECT] Sep 14 13:10:38.15: [12703]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS14' Sep 14 13:10:38.15: [12703]: STATE CHANGE: ANSWERING -> RECEIVING Sep 14 13:10:38.15: [12703]: MODEM input buffering enabled Sep 14 13:10:38.15: [12703]: RECV FAX: begin Sep 14 13:10:38.15: [12703]: MODEM input buffering disabled Sep 14 13:10:38.15: [12703]: <-- HDLC<32:FF C0 04 AD 00 55 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 2C 74 4C 74 8C> Sep 14 13:10:38.15: [12703]: <-- data [32] Sep 14 13:10:38.15: [12703]: <-- data [2] Sep 14 13:10:38.15: [12703]: --> [7:CONNECT] Sep 14 13:10:38.15: [12703]: <-- HDLC<23:FF C0 02 EC 04 9E B6 A6 26 86 C6 82 04 9E C6 86 E6 A6 32 04 04 04 04> Sep 14 13:10:38.15: [12703]: <-- data [23] Sep 14 13:10:38.15: [12703]: <-- data [2] Sep 14 13:10:38.16: [12703]: --> [7:CONNECT] Sep 14 13:10:38.16: [12703]: <-- HDLC<10:FF C8 01 04 76 5F 23 01 FB C0> Sep 14 13:10:38.16: [12703]: <-- data [10] Sep 14 13:10:38.16: [12703]: <-- data [2] Sep 14 13:10:40.35: [12703]: --> [2:OK] Sep 14 13:10:40.35: [12703]: <-- [9:AT+FRH=3\r] Sep 14 13:10:40.37: [12703]: --> [7:CONNECT] Sep 14 13:10:41.01: [12703]: --> HDLC<16:FF C0 04 00 00 6A AA AA 00 31 09 01 48 D0 13 2C> Sep 14 13:10:41.01: [12703]: --> [2:OK] Sep 14 13:10:41.01: [12703]: <-- [9:AT+FRH=3\r] Sep 14 13:10:41.02: [12703]: --> [7:CONNECT] Sep 14 13:10:41.71: [12703]: --> HDLC<25:FF C0 02 EC EC 0C CC EC 0C 2C 1C EC 6C 8C 04 04 04 04 04 04 04 04 04 3A 40> Sep 14 13:10:41.71: [12703]: --> [2:OK] Sep 14 13:10:41.71: [12703]: <-- [9:AT+FRH=3\r] Sep 14 13:10:41.72: [12703]: --> [7:CONNECT] Sep 14 13:10:42.14: [12703]: --> HDLC<15:FF C8 01 04 77 1D 23 01 89 01 01 19 00 2B 8F> Sep 14 13:10:42.14: [12703]: --> [2:OK] Sep 14 13:10:42.14: [12703]: DELAY 1500 ms Sep 14 13:10:43.64: [12703]: <-- [9:AT+FTH=3\r] Sep 14 13:10:44.60: [12703]: --> [7:CONNECT] Sep 14 13:10:44.60: [12703]: <-- HDLC<32:FF C0 04 AD 00 55 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 2C 74 4C 74 8C> Sep 14 13:10:44.60: [12703]: <-- data [32] Sep 14 13:10:44.60: [12703]: <-- data [2] Sep 14 13:10:44.60: [12703]: --> [7:CONNECT] Sep 14 13:10:44.60: [12703]: <-- HDLC<23:FF C0 02 EC 04 9E B6 A6 26 86 C6 82 04 9E C6 86 E6 A6 32 04 04 04 04> Sep 14 13:10:44.61: [12703]: <-- data [23] Sep 14 13:10:44.61: [12703]: <-- data [2] Sep 14 13:10:44.61: [12703]: --> [7:CONNECT] Sep 14 13:10:44.61: [12703]: <-- HDLC<10:FF C8 01 04 76 5F 23 01 FB C0> Sep 14 13:10:44.61: [12703]: <-- data [10] Sep 14 13:10:44.61: [12703]: <-- data [2] Sep 14 13:10:46.82: [12703]: --> [2:OK] Sep 14 13:10:46.82: [12703]: <-- [9:AT+FRH=3\r] Sep 14 13:10:46.86: [12703]: --> [7:CONNECT] Sep 14 13:10:48.32: [12703]: --> HDLC<16:FF C0 04 00 00 6A AA AA 00 31 09 01 48 D0 13 2C> Sep 14 13:10:48.32: [12703]: --> [2:OK] Sep 14 13:10:48.32: [12703]: <-- [9:AT+FRH=3\r] Sep 14 13:10:48.33: [12703]: --> [7:CONNECT] Sep 14 13:10:49.02: [12703]: --> HDLC<25:FF C0 02 EC EC 0C CC EC 0C 2C 1C EC 6C 8C 04 04 04 04 04 04 04 04 04 3A 40> Sep 14 13:10:49.02: [12703]: --> [2:OK] Sep 14 13:10:49.02: [12703]: <-- [9:AT+FRH=3\r] Sep 14 13:10:49.03: [12703]: --> [7:CONNECT] Sep 14 13:10:49.46: [12703]: --> HDLC<15:FF C8 01 04 77 1D 23 01 89 01 01 19 00 2B 8F> Sep 14 13:10:49.46: [12703]: --> [2:OK] Sep 14 13:10:49.46: [12703]: DELAY 1500 ms Sep 14 13:10:50.95: [12703]: <-- [9:AT+FTH=3\r] Sep 14 13:10:51.91: [12703]: --> [7:CONNECT] Sep 14 13:10:51.91: [12703]: <-- HDLC<32:FF C0 04 AD 00 55 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 2C 74 4C 74 8C> Sep 14 13:10:51.91: [12703]: <-- data [32] Sep 14 13:10:51.91: [12703]: <-- data [2] Sep 14 13:10:51.91: [12703]: --> [7:CONNECT] Sep 14 13:10:51.91: [12703]: <-- HDLC<23:FF C0 02 EC 04 9E B6 A6 26 86 C6 82 04 9E C6 86 E6 A6 32 04 04 04 04> Sep 14 13:10:51.92: [12703]: <-- data [23] Sep 14 13:10:51.92: [12703]: <-- data [2] Sep 14 13:10:51.92: [12703]: --> [7:CONNECT] Sep 14 13:10:51.92: [12703]: <-- HDLC<10:FF C8 01 04 76 5F 23 01 FB C0> Sep 14 13:10:51.92: [12703]: <-- data [10] Sep 14 13:10:51.92: [12703]: <-- data [2] Sep 14 13:10:54.13: [12703]: --> [2:OK] Sep 14 13:10:54.13: [12703]: <-- [9:AT+FRH=3\r] Sep 14 13:10:54.17: [12703]: --> [7:CONNECT] Sep 14 13:10:55.63: [12703]: --> HDLC<16:FF C0 04 00 00 6A AA AA 00 31 09 01 48 D0 13 2C> Sep 14 13:10:55.63: [12703]: --> [2:OK] Sep 14 13:10:55.63: [12703]: <-- [9:AT+FRH=3\r] Sep 14 13:10:55.63: [12703]: --> [7:CONNECT] Sep 14 13:10:56.33: [12703]: --> HDLC<25:FF C0 02 EC EC 0C CC EC 0C 2C 1C EC 6C 8C 04 04 04 04 04 04 04 04 04 3A 40> Sep 14 13:10:56.33: [12703]: --> [2:OK] Sep 14 13:10:56.33: [12703]: <-- [9:AT+FRH=3\r] Sep 14 13:10:56.33: [12703]: --> [7:CONNECT] Sep 14 13:10:56.76: [12703]: --> HDLC<15:FF C8 01 04 77 1D 23 01 89 01 01 19 00 2B 8F> Sep 14 13:10:56.76: [12703]: --> [2:OK] Sep 14 13:10:56.76: [12703]: DELAY 1500 ms Sep 14 13:10:58.26: [12703]: <-- [9:AT+FTH=3\r] Sep 14 13:10:59.22: [12703]: --> [7:CONNECT] Sep 14 13:10:59.22: [12703]: <-- HDLC<32:FF C0 04 AD 00 55 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 2C 74 4C 74 8C> Sep 14 13:10:59.22: [12703]: <-- data [32] Sep 14 13:10:59.22: [12703]: <-- data [2] Sep 14 13:10:59.22: [12703]: --> [7:CONNECT] Sep 14 13:10:59.22: [12703]: <-- HDLC<23:FF C0 02 EC 04 9E B6 A6 26 86 C6 82 04 9E C6 86 E6 A6 32 04 04 04 04> Sep 14 13:10:59.22: [12703]: <-- data [23] Sep 14 13:10:59.22: [12703]: <-- data [2] Sep 14 13:10:59.23: [12703]: --> [7:CONNECT] Sep 14 13:10:59.23: [12703]: <-- HDLC<10:FF C8 01 04 76 5F 23 01 FB C0> Sep 14 13:10:59.23: [12703]: <-- data [10] Sep 14 13:10:59.23: [12703]: <-- data [2] Sep 14 13:11:01.44: [12703]: --> [2:OK] Sep 14 13:11:01.44: [12703]: <-- [9:AT+FRH=3\r] Sep 14 13:11:04.11: [12703]: --> [7:CONNECT] Sep 14 13:11:05.60: [12703]: --> HDLC<16:FF C0 04 00 00 6A AA AA 00 31 09 01 48 D0 13 2C> Sep 14 13:11:05.60: [12703]: --> [2:OK] Sep 14 13:11:05.60: [12703]: <-- [9:AT+FRH=3\r] Sep 14 13:11:05.61: [12703]: --> [7:CONNECT] Sep 14 13:11:06.30: [12703]: --> HDLC<25:FF C0 02 EC EC 0C CC EC 0C 2C 1C EC 6C 8C 04 04 04 04 04 04 04 04 04 3A 40> Sep 14 13:11:06.30: [12703]: --> [2:OK] Sep 14 13:11:06.30: [12703]: <-- [9:AT+FRH=3\r] Sep 14 13:11:06.31: [12703]: --> [7:CONNECT] Sep 14 13:11:06.74: [12703]: --> HDLC<15:FF C8 01 04 77 1D 23 01 89 01 01 19 00 2B 8F> Sep 14 13:11:06.74: [12703]: --> [2:OK] Sep 14 13:11:06.74: [12703]: DELAY 1500 ms Sep 14 13:11:08.24: [12703]: <-- [9:AT+FTH=3\r] Sep 14 13:11:09.19: [12703]: --> [7:CONNECT] Sep 14 13:11:09.19: [12703]: <-- HDLC<32:FF C0 04 AD 00 55 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 2C 74 4C 74 8C> Sep 14 13:11:09.19: [12703]: <-- data [32] Sep 14 13:11:09.19: [12703]: <-- data [2] Sep 14 13:11:09.20: [12703]: --> [7:CONNECT] Sep 14 13:11:09.20: [12703]: <-- HDLC<23:FF C0 02 EC 04 9E B6 A6 26 86 C6 82 04 9E C6 86 E6 A6 32 04 04 04 04> Sep 14 13:11:09.20: [12703]: <-- data [23] Sep 14 13:11:09.20: [12703]: <-- data [2] Sep 14 13:11:09.20: [12703]: --> [7:CONNECT] Sep 14 13:11:09.20: [12703]: <-- HDLC<10:FF C8 01 04 76 5F 23 01 FB C0> Sep 14 13:11:09.20: [12703]: <-- data [10] Sep 14 13:11:09.20: [12703]: <-- data [2] Sep 14 13:11:11.41: [12703]: --> [2:OK] Sep 14 13:11:11.41: [12703]: <-- [9:AT+FRH=3\r] Sep 14 13:11:11.44: [12703]: --> [7:CONNECT] Sep 14 13:11:12.89: [12703]: --> HDLC<16:FF C0 04 00 00 6A AA AA 00 31 09 01 48 D0 13 2C> Sep 14 13:11:12.89: [12703]: --> [2:OK] Sep 14 13:11:12.89: [12703]: <-- [9:AT+FRH=3\r] Sep 14 13:11:12.90: [12703]: --> [7:CONNECT] Sep 14 13:11:13.59: [12703]: --> HDLC<25:FF C0 02 EC EC 0C CC EC 0C 2C 1C EC 6C 8C 04 04 04 04 04 04 04 04 04 3A 40> Sep 14 13:11:13.59: [12703]: --> [2:OK] Sep 14 13:11:13.59: [12703]: <-- [9:AT+FRH=3\r] Sep 14 13:11:13.60: [12703]: --> [7:CONNECT] Sep 14 13:11:14.03: [12703]: --> HDLC<15:FF C8 01 04 77 1D 23 01 89 01 01 19 00 2B 8F> Sep 14 13:11:14.03: [12703]: --> [2:OK] Sep 14 13:11:14.03: [12703]: DELAY 1500 ms Sep 14 13:11:15.53: [12703]: <-- [9:AT+FTH=3\r] Sep 14 13:11:16.48: [12703]: --> [7:CONNECT] Sep 14 13:11:16.48: [12703]: <-- HDLC<32:FF C0 04 AD 00 55 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 2C 74 4C 74 8C> Sep 14 13:11:16.48: [12703]: <-- data [32] Sep 14 13:11:16.48: [12703]: <-- data [2] Sep 14 13:11:16.49: [12703]: --> [7:CONNECT] Sep 14 13:11:16.49: [12703]: <-- HDLC<23:FF C0 02 EC 04 9E B6 A6 26 86 C6 82 04 9E C6 86 E6 A6 32 04 04 04 04> Sep 14 13:11:16.49: [12703]: <-- data [23] Sep 14 13:11:16.49: [12703]: <-- data [2] Sep 14 13:11:16.49: [12703]: --> [7:CONNECT] Sep 14 13:11:16.49: [12703]: <-- HDLC<10:FF C8 01 04 76 5F 23 01 FB C0> Sep 14 13:11:16.49: [12703]: <-- data [10] Sep 14 13:11:16.49: [12703]: <-- data [2] Sep 14 13:11:18.70: [12703]: --> [2:OK] Sep 14 13:11:18.70: [12703]: <-- [9:AT+FRH=3\r] Sep 14 13:11:21.80: [12703]: --> [0:] Sep 14 13:11:21.80: [12703]: MODEM <Empty line> Sep 14 13:11:21.80: [12703]: MODEM TIMEOUT: waiting for v.21 carrier Sep 14 13:11:21.80: [12703]: <-- data [1] Sep 14 13:11:21.81: [12703]: --> [2:] Sep 14 13:11:21.81: [12703]: --> [2:OK] Sep 14 13:11:21.81: [12703]: RECV FAX: RSPREC invalid response received Sep 14 13:11:21.81: [12703]: RECV FAX: end Sep 14 13:11:21.81: [12703]: SESSION END

--- Lee Howard <faxguy@xxxxxxxxxxxxxxxx> wrote:
I think that you need to turn up your SessionTracing to something like 0xFFF.

Lee.

Tim Paulus wrote:
In general, I can send and receive faxes.  However,
one fax that I attempt to send to my hylafax server
always fails.  Here's the log:
Sep 13 13:24:38.64: [ 2101]: SESSION BEGIN
000000004
16784073077
Sep 13 13:24:38.64: [ 2101]: HylaFAX (tm) Version
4.2.1
Sep 13 13:24:38.64: [ 2101]: <--
[20:AT+FCC=1,,,,,,,,0;A\r]
Sep 13 13:25:30.51: [ 2101]: --> [6:+FHS:0]
Sep 13 13:25:30.51: [ 2101]: REMOTE HANGUP: Normal
and
proper end of connection (code 0)
Sep 13 13:25:30.51: [ 2101]: ANSWER: Ring detected
without successful handshake
Sep 13 13:25:30.51: [ 2101]: SESSION END
Notice the long delay between +FCC and +FHS.

I have access to this sending fax machine (it's a
fax
store and forward server) and I can fax from it to
another fax machine just fine, I just can't fax
from
it to my hylafax server.
Hylafax version: 4.2.1
OS: Redhat Fedora Core 4, kernel 2.6.11-1.1369_FC4
Modem: Multi-tech Systems MT5634ZPX-PCI-U
I can't seem to make any progress on this one.  It
looks to me like the modems initiate a connection
but
the sending modem never acknowledges the connection
and eventually hangs up.  Has anyone seen this
before?

__________________________________ Yahoo! Mail - PC Magazine Editors' Choice 2005 http://mail.yahoo.com

____________________ HylaFAX(tm) Users Mailing List
_______________________

To subscribe/unsubscribe, click
http://lists.hylafax.org/cgi-bin/lsg2.cgi

On UNIX: mail -s unsubscribe
hylafax-users-request@xxxxxxxxxxx < /dev/null

*To learn about expensive HylaFAX(tm) support,
mail sales@xxxxxxxxx*
____________________ HylaFAX(tm) Users Mailing List
_______________________
 To subscribe/unsubscribe, click
http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe
hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support,
mail sales@xxxxxxxxx*
__________________________________ Yahoo! Mail - PC Magazine Editors' Choice 2005 http://mail.yahoo.com
____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

--
Stephen Carville <stephen@xxxxxxxxxxxxxx>
Unix and Network Admin
Nationwide Totalflood
6033 W. Century Blvd
Los Angeles, CA 90045
310-342-3602

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

References:
- Re: [hylafax-users] Ring detected without successful handshake
  - From: Tim Paulus

Prev by Date: Re: [hylafax-users] MultiTech ISI5634UPCI/8
Next by Date: [hylafax-users] How does sendfax -D work?
Previous by thread: Re: [hylafax-users] Ring detected without successful handshake
Next by thread: Re: [hylafax-users] Ring detected without successful handshake
Index(es):
- Main
- Thread

Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services