Re: [hylafax-users] Intermittent problem with a Multitech MT5634ZPX-PCI

[George Bell <gbell5@xxxxxxx>]

I see you have GettyArgs defined.  Are you using HylaFAX to receive data 
connections as well?  If so, can you identify any correlation in the logs 
with data calls and the server not responding to rings?

George

On Wednesday 06 April 2005 10:54, Hugo Kobayashi wrote:
> Hi,
>
> We've configured a Multitech MT5634ZPX-PCI modem for receiving fax,
> but from time to time, it just stops detecting the ring and stops
> answering calls. faxstat says it's "Running and idle", but it only
> gets to work again when I kill the faxgetty process.
>
> It's been working like this for 3 weeks now and the problem occurs
> every two days on average. We've already tried the configuration as
> class 1 and class 2 with no success.
>
> ServerTracing (0x08F6F) is enabled, but it doesn't seem to log any
> information about this problem. The last configuration we've tried is
> in the bottom of this message.
>
> We're running hylafax 4.2.1 on a FreeBSD 4.11-RELEASE (i386) and the
> firmware version of the modem is 8.19i.
>
> Any suggestions?
>
> Thanks,
> Hugo
>
> ----config.cuaa0 begin
> LogFacility:            local2
> DialStringRules:        etc/dialrules
> ServerTracing:          0x08F6F
> SessionTracing:         11
> RecvFileMode:           0600
> LogFileMode:            0600
> DeviceMode:             0600
> RingsBeforeAnswer:      1
> SpeakerVolume:          off
> GettyArgs:              "-h %l dx_%s"
> LocalIdentifier:        "NothingSetup"
> TagLineFont:            etc/lutRS18.pcf
> TagLineFormat:          "From %%l|%c|Page %%P of %%T"
> MaxRecvPages:           25
>
> ModemType:              Class2
> ModemRate:              19200
> ModemFlowControl:       rtscts
> ModemSoftResetCmd:      ATZ
> ModemNoFlowCmd:         AT&K0
> ModemSoftFlowCmd:       AT&K4
> ModemHardFlowCmd:       AT&K3
> ModemRecvFillOrder:     MSB2LSB
> ModemSetupDTRCmd:       AT&D3
> ModemSetupDCDCmd:       AT&C1
>
> Class2APQueryCmd:       none
> Class2BUGCmd:           none
> Class2NFLOCmd:          AT+FLO=0
> Class2SFLOCmd:          AT+FLO=1
> Class2HFLOCmd:          AT+FLO=2
>
> Class2CQQueryCmd:       "!0-2"
> Class2CQCmd:            AT+FCQ=1
> -----config.cuaa0 end
>
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*