Re: [hylafax-users] Dial pause

[Gilles <gilles@xxxxxxxxxxxxxxxxxxxxx>]

Hi.

> Check the session log in the "log" directory, it should contain the 
> dial command exactly as sent to the modem.

This is type one type of failure:
-----
Dec 17 02:52:45.89: [29219]: SESSION BEGIN 000000036 25239619
Dec 17 02:52:45.89: [29219]: HylaFAX (tm) Version 4.2.0
Dec 17 02:52:45.89: [29219]: SEND FAX: JOB 2 DEST 0025239619 COMMID 000000036 DEVICE '/dev/ttyS0'
Dec 17 02:52:45.89: [29219]: <-- [10:AT+FTBC=0\r]
Dec 17 02:52:46.14: [29219]: --> [2:OK]
Dec 17 02:52:46.14: [29219]: <-- [10:AT+FBOR=0\r]
Dec 17 02:52:46.39: [29219]: --> [2:OK]
Dec 17 02:52:46.39: [29219]: <-- [13:AT+FPHCTO=30\r]
Dec 17 02:52:46.64: [29219]: --> [2:OK]
Dec 17 02:52:46.64: [29219]: <-- [24:AT+FDCC=1,5,2,2,1,0,0,0\r]
Dec 17 02:52:46.89: [29219]: --> [2:OK]
Dec 17 02:52:46.89: [29219]: DIAL 0025239619
Dec 17 02:52:46.89: [29219]: <-- [15:ATDT0025239619\r]
Dec 17 02:53:48.91: [29219]: --> [8:+FHNG: 4]
Dec 17 02:53:48.91: [29219]: REMOTE HANGUP: Ringback detected, no answer (timeout) (code 4)
Dec 17 02:53:48.91: [29219]: SEND FAILED: JOB 2 DEST 0025239619 ERR Ringback detected, no answer (timeout)
Dec 17 02:53:48.91: [29219]: <-- [5:ATH0\r]
Dec 17 02:53:49.47: [29219]: --> [2:OK]
Dec 17 02:53:49.47: [29219]: SESSION END
-----

This another:
-----
Dec 17 02:59:03.34: [29388]: SESSION BEGIN 000000038 25239619
Dec 17 02:59:03.34: [29388]: HylaFAX (tm) Version 4.2.0
Dec 17 02:59:03.34: [29388]: SEND FAX: JOB 2 DEST 0025239619 COMMID 000000038 DEVICE '/dev/ttyS0'
Dec 17 02:59:03.34: [29388]: <-- [10:AT+FTBC=0\r]
Dec 17 02:59:03.58: [29388]: --> [2:OK]
Dec 17 02:59:03.58: [29388]: <-- [10:AT+FBOR=0\r]
Dec 17 02:59:03.83: [29388]: --> [2:OK]
Dec 17 02:59:03.83: [29388]: <-- [13:AT+FPHCTO=30\r]
Dec 17 02:59:04.08: [29388]: --> [2:OK]
Dec 17 02:59:04.08: [29388]: <-- [24:AT+FDCC=1,5,2,2,1,0,0,0\r]
Dec 17 02:59:04.36: [29388]: --> [2:OK]
Dec 17 02:59:04.36: [29388]: DIAL 0025239619
Dec 17 02:59:04.36: [29388]: <-- [15:ATDT0025239619\r]
Dec 17 03:00:04.79: [29388]: --> [4:BUSY]
Dec 17 03:00:04.79: [29388]: SEND FAILED: JOB 2 DEST 0025239619 ERR Busy signal detected
Dec 17 03:00:04.79: [29388]: <-- [5:ATH0\r]
Dec 17 03:00:05.04: [29388]: --> [2:OK]
Dec 17 03:00:05.04: [29388]: SESSION END
-----

And this is the third one:
-----
Dec 17 03:20:09.25: [29765]: SESSION BEGIN 000000043 25239619
Dec 17 03:20:09.25: [29765]: HylaFAX (tm) Version 4.2.0
Dec 17 03:20:09.26: [29765]: SEND FAX: JOB 2 DEST 0025239619 COMMID 000000043 DEVICE '/dev/ttyS0'
Dec 17 03:20:09.26: [29765]: <-- [10:AT+FTBC=0\r]
Dec 17 03:20:09.50: [29765]: --> [2:OK]
Dec 17 03:20:09.50: [29765]: <-- [10:AT+FBOR=0\r]
Dec 17 03:20:09.75: [29765]: --> [2:OK]
Dec 17 03:20:09.75: [29765]: <-- [13:AT+FPHCTO=30\r]
Dec 17 03:20:10.00: [29765]: --> [2:OK]
Dec 17 03:20:10.00: [29765]: <-- [24:AT+FDCC=1,5,2,2,1,0,0,0\r]
Dec 17 03:20:10.25: [29765]: --> [2:OK]
Dec 17 03:20:10.25: [29765]: DIAL 0025239619
Dec 17 03:20:10.25: [29765]: <-- [15:ATDT0025239619\r]
Dec 17 03:20:11.08: [29765]: --> [11:BLACKLISTED]
Dec 17 03:20:11.08: [29765]: SEND FAILED: JOB 2 DEST 0025239619 ERR Blacklisted by modem
Dec 17 03:20:11.08: [29765]: <-- [5:ATH0\r]
Dec 17 03:20:11.34: [29765]: --> [2:OK]
Dec 17 03:20:11.34: [29765]: SESSION END
-----

Can you see the pause somewhere?


> >"Blacklisted by modem".
> 
> The modem won't call the number any more, due to too many unsuccessful 
> tries. This behavior is required in some countries (e.g. Germany); 
> however, on many modems the country configuration can be switched with 
> appropriate initialization commands.

Should I swith off/on the modem to make it happy to dial that number again?


Thanks,
Gilles

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*