Re: [hylafax-users] Distinctive Ring Tones

[George Bell <gbell5@xxxxxxx>]

On Sunday 12 December 2004 00:24, Glenn Lyons wrote:
> Hi All,
>
> My understanding is that the command to enable Distinctive Ring
> detection depends on the Modem's chipset and all are derived from three
> generic chipsets.
>
> CHIPSET			ENABLE		RESPONSE
> 3Com/USR/TI 		"ATS41=1"	RING A, RING B, RING C,...
> Rockwell/Conexant 	"AT-SDR=7	RING 1, RING 2, RING 3,...
> Lucant/Agree		"AT+VDR=1,0	DRON xxx DROFF yyy
>
> where xxx in the time the RING is on and yyy is time the RING is OFF.
> The VDR parameters are param 1 is 0 or 1 for off or on and param 2 is
> 0 - n which is the time interval for the RING count and is usually
> default of 100 millisecs.
>
> As I said this is my best understanding and is not necessarily all
> correct.
>
> I have tested two V90/92 models here. A SWANN SMART Turbo E120, and
> DIAMOND VOICE 56SE. They are both Lucant types. Unfortunately, this is
> the only mode of DR that hylafax does not support.
>
> Has anyone got a patch or is anyone working on an update for this type
> of distinctive ring response?
>

Indeed there is.  Patches are available for supporting the Lucent/Agere style 
of distinctive ringing on ftp://georgebell.no-ip.com/pub

There is also a link to it on the HylaFAX wike site:

http://wiki.ifax.com/tiki-index.php

George


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*