Re: [hylafax-users] Does hylafax require exclusive access to the device

[Bodo Meissner <bodo@xxxxxxxxx>]

Am 2004.12.02 06:15 schrieb(en) Max Mothwurf:

> Dec  2 04:51:56 southpole HylaFAX[6213]: HylaFAX INET Protocol   
> Server:
> restarted.
> Dec  2 04:51:56 southpole HylaFAX[6213]: HylaFAX Old Protocol Server:
> restarted.
> Dec  2 04:51:56 southpole HylaFAX[6213]: HylaFAX SNPP Protocol  
> Server:
> restarted.

I don't get these, but I don't think that matters.
I use 4.2.0, this might behave differently.

Before the following messages I get some messages starting with
FaxQueuer[495]: Define AreaCode = "8862"
FaxQueuer[495]: Define CountryCode = "49"
Maybe you don't have full tracing at that time.

> Dec  2 04:51:56 southpole FaxQueuer[6202]: HylaFAX (tm) Version 4.1.8
> Dec  2 04:51:56 southpole FaxQueuer[6202]: Copyright (c) 1990-1996  
> Sam
> Leffler
> Dec  2 04:51:56 southpole FaxQueuer[6202]: Copyright (c) 1991-1996
> Silicon
> Graphics, Inc.

After this I have some messages
FaxQueuer[495]: FIFO RECV "+faxCAPI:RP3ffdffff:ff"
FaxQueuer[495]: MODEM faxCAPI: READY, capabilities P3ffdffff:ff
FaxQueuer[495]: FIFO RECV "+faxCAPI:N+49.xxxx.xxxxxxx"
FaxQueuer[495]: MODEM faxCAPI: NUMBER +49.xxxx.xxxxxxx
(The capabilities stuff is repeated 3 times, the number stuff once.)

I would expect a similar communication in your case.

I wrote:
> > Maybe everything is OK with the modem, but faxmodem only can't tell  
> > this.
>
> Is there a way to check this?

If you really have full tracing enabled when the log messages are  
written, I don't know an option to get more messages from Hylafax.

You could change the startup scripts to start faxq with strace.


Bodo

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*