|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] Does hylafax require exclusive access to the device
Hi Bodo,
> the word FIFO in the line
> FIFO: open: No such device or address
> is probably the file name. I don't think it has a problem with /dev/
> ttyS0.
> man fifo ->
> [...]
> A process can open a FIFO in non-blocking mode.
> [...]
> In this case,
> [...]
> opening for write only will fail with ENXIO (no such device or
> address) unless the other end has already been opened.
>
> Files FIFO and FIFO.ttyS0 (in /var/spool/hylafax) are used for
> communication between Hylafax processes. According to the error message
> no process has opened FIFO for reading.
OK, then it seems not to ba a problem....
> Do you get Hylafax messages in syslog?
> Maybe you should increase the value ServerTracing in Hylafax' config to
> get more messages. (For debugging I canged this from the default value
> 0x08501 to 0x03FFFF on my system.)
I had already some time ago changed it to 0x0FFFFF. I cant see any
mysterious from it (see attached file)
Cheers
Max
--
NEU +++ DSL Komplett von GMX +++ http://www.gmx.net/de/go/dsl
GMX DSL-Netzanschluss + Tarif zum supergünstigen Komplett-Preis!
The fax is submitted by a client in the network:
Nov 10 09:51:58 southpole HylaFAX[8191]: Filesystem has SysV-style file creation semantics.
Nov 10 09:52:00 southpole FaxQueuer[6813]: SUBMIT JOB 9
Nothing happens. Restarting the server:
Nov 10 09:54:30 southpole FaxQueuer[6813]: QUIT
Nov 10 09:54:30 southpole FaxQueuer[8260]: HylaFAX (tm) Version 4.1.8
Nov 10 09:54:30 southpole FaxQueuer[8260]: Copyright (c) 1990-1996 Sam Leffler
Nov 10 09:54:30 southpole FaxQueuer[8260]: Copyright (c) 1991-1996 Silicon Graphics, Inc.
Nov 10 09:54:30 southpole HylaFAX[8263]: HylaFAX INET Protocol Server: restarted.
Nov 10 09:54:30 southpole HylaFAX[8263]: HylaFAX Old Protocol Server: restarted.
Nov 10 09:54:30 southpole HylaFAX[8263]: HylaFAX SNPP Protocol Server: restarted.
Nov 10 09:54:31 southpole FaxSend[8269]: servertracing = 0x03FFFF (line 41)
Nov 10 09:54:31 southpole FaxSend[8269]: sessiontracing = 0xffffffff (line 42)
Nov 10 09:54:31 southpole FaxSend[8269]: recvfilemode = 0666 (line 43)
Nov 10 09:54:31 southpole FaxSend[8269]: logfilemode = 0666 (line 44)
Nov 10 09:54:31 southpole FaxSend[8269]: devicemode = 0660 (line 45)
Nov 10 09:54:31 southpole FaxSend[8269]: Unknown configuration parameter "ringsbeforeanswer" ignored at line 46
Nov 10 09:54:31 southpole FaxSend[8269]: speakervolume = low (line 47)
Nov 10 09:54:31 southpole FaxSend[8269]: Unknown configuration parameter "gettyargs" ignored at line 48
Nov 10 09:54:31 southpole FaxSend[8269]: localidentifier = xxxxxx (line 49)
Nov 10 09:54:31 southpole FaxSend[8269]: taglinefont = etc/lutRS18.pcf (line 50)
Nov 10 09:54:31 southpole FaxSend[8269]: taglineformat = From %%l|%c|Page %%P of %%T (line 51)
Nov 10 09:54:31 southpole FaxSend[8269]: maxrecvpages = 25 (line 52)
Nov 10 09:54:31 southpole FaxSend[8269]: modemtype = Class1 (line 58)
Nov 10 09:54:31 southpole FaxSend[8269]: modemrate = 19200 (line 59)
Nov 10 09:54:31 southpole FaxSend[8269]: modemflowcontrol = xonxoff (line 60)
Nov 10 09:54:31 southpole FaxSend[8269]: modemsetupdtrcmd = ATS13=1&D2 (line 62)
Nov 10 09:54:31 southpole FaxSend[8269]: modemsetupdcdcmd = AT&C1 (line 63)
Nov 10 09:54:31 southpole FaxSend[8269]: modemnoflowcmd = AT&H0&I0&R1 (line 64)
Nov 10 09:54:31 southpole FaxSend[8269]: modemhardflowcmd = AT&H1&I0&R2 (line 65)
Nov 10 09:54:31 southpole FaxSend[8269]: modemsoftflowcmd = AT&H2&I2&R1 (line 66)
Nov 10 09:54:31 southpole FaxSend[8269]: modemresultcodescmd = ATQ0X4 (line 67)
Nov 10 09:54:31 southpole FaxSend[8269]: modemmfrquerycmd = !USR (line 69)
Nov 10 09:54:31 southpole FaxSend[8269]: modemmodelquerycmd = ATI3 (line 70)
Nov 10 09:54:31 southpole FaxSend[8269]: modemrevquerycmd = ATI7 (line 71)
Nov 10 09:54:31 southpole FaxSend[8269]: class1nflocmd = AT&H0&I0&R1 (line 77)
Nov 10 09:54:31 southpole FaxSend[8269]: class1hflocmd = AT&H1&I0&R2 (line 78)
Nov 10 09:54:31 southpole FaxSend[8269]: class1sflocmd = (line 79)
Nov 10 09:54:31 southpole FaxSend[8269]: class1responsewaitcmd = AT+FRS=1 (line 83)
Nov 10 09:54:31 southpole FaxSend[8269]: modemsetupaacmd = AT+FCLASS=0 (line 88)
Nov 10 09:54:31 southpole FaxSend[8269]: modemanswercmd = AT+FCLASS=1A (line 89)
Nov 10 09:54:31 southpole FaxSend[8269]: class2nrcmd = AT+FNR=1,1,1,0 (line 95)
Nov 10 09:54:31 southpole FaxSend[8269]: Define AreaCode = "211"
Nov 10 09:54:31 southpole FaxSend[8269]: Define CountryCode = "49"
Nov 10 09:54:31 southpole FaxSend[8269]: Define LongDistancePrefix = "0"
Nov 10 09:54:31 southpole FaxSend[8269]: Define InternationalPrefix = "00"
Nov 10 09:54:31 southpole FaxSend[8269]: Define Area = "211"
Nov 10 09:54:31 southpole FaxSend[8269]: Define Country = "49"
Nov 10 09:54:31 southpole FaxSend[8269]: Define IDPrefix = "00"
Nov 10 09:54:31 southpole FaxSend[8269]: Define LDPrefix = "0"
Nov 10 09:54:31 southpole FaxSend[8269]: Define WS = " "
Nov 10 09:54:31 southpole FaxSend[8269]: CanonicalNumber := [
Nov 10 09:54:31 southpole FaxSend[8269]: "%.*" = ""
Nov 10 09:54:31 southpole FaxSend[8269]: "[abcABC]" = "2"
Nov 10 09:54:31 southpole FaxSend[8269]: "[defDEF]" = "3"
Nov 10 09:54:31 southpole FaxSend[8269]: "[ghiGHI]" = "4"
Nov 10 09:54:31 southpole FaxSend[8269]: "[jklJKL]" = "5"
Nov 10 09:54:31 southpole FaxSend[8269]: "[mnoMNO]" = "6"
Nov 10 09:54:31 southpole FaxSend[8269]: "[prsPRS]" = "7"
Nov 10 09:54:31 southpole FaxSend[8269]: "[tuvTUV]" = "8"
Nov 10 09:54:31 southpole FaxSend[8269]: "[wxyWXY]" = "9"
Nov 10 09:54:31 southpole FaxSend[8269]: "[^+0-9]+" = ""
Nov 10 09:54:31 southpole FaxSend[8269]: "^00" = "+"
Nov 10 09:54:31 southpole FaxSend[8269]: "^0" = "+49"
Nov 10 09:54:31 southpole FaxSend[8269]: "^[^+]" = "+49211&"
Nov 10 09:54:31 southpole FaxSend[8269]: ]
Nov 10 09:54:31 southpole FaxSend[8269]: DialString := [
Nov 10 09:54:31 southpole FaxSend[8269]: "[- .]+" = ""
Nov 10 09:54:31 southpole FaxSend[8269]: "[abcABC]" = "2"
Nov 10 09:54:31 southpole FaxSend[8269]: "[defDEF]" = "3"
Nov 10 09:54:31 southpole FaxSend[8269]: "[ghiGHI]" = "4"
Nov 10 09:54:31 southpole FaxSend[8269]: "[jklJKL]" = "5"
Nov 10 09:54:31 southpole FaxSend[8269]: "[mnoMNO]" = "6"
Nov 10 09:54:31 southpole FaxSend[8269]: "[prsPRS]" = "7"
Nov 10 09:54:31 southpole FaxSend[8269]: "[tuvTUV]" = "8"
Nov 10 09:54:31 southpole FaxSend[8269]: "[wxyWXY]" = "9"
Nov 10 09:54:31 southpole FaxSend[8269]: "^[+]49" = "0"
Nov 10 09:54:31 southpole FaxSend[8269]: "^[+]" = "00"
Nov 10 09:54:31 southpole FaxSend[8269]: ]
Nov 10 09:54:32 southpole FaxSend[8269]: MODEM set DTR OFF
Nov 10 09:54:32 southpole FaxSend[8269]: DELAY 75 ms
Nov 10 09:54:32 southpole FaxSend[8269]: MODEM set DTR ON
Nov 10 09:54:32 southpole FaxSend[8269]: DELAY 2600 ms
Nov 10 09:54:36 southpole FaxSend[8269]: MODEM set baud rate: 19200 baud, input flow XON/XOFF, output flow XON/XOFF
Nov 10 09:54:36 southpole FaxSend[8269]: DELAY 10 ms
Nov 10 09:54:36 southpole FaxSend[8269]: MODEM flush i/o
Nov 10 09:54:36 southpole FaxSend[8269]: <-- [4:ATZ\r]
Nov 10 09:54:36 southpole FaxSend[8269]: --> [2:OK]
Nov 10 09:54:36 southpole FaxSend[8269]: DELAY 3000 ms
Nov 10 09:54:39 southpole FaxSend[8269]: <-- [5:ATE0\r]
Nov 10 09:54:39 southpole FaxSend[8269]: --> [2:OK]
Nov 10 09:54:39 southpole FaxSend[8269]: <-- [5:ATV1\r]
Nov 10 09:54:39 southpole FaxSend[8269]: --> [2:OK]
Nov 10 09:54:39 southpole FaxSend[8269]: <-- [7:ATQ0X4\r]
Nov 10 09:54:40 southpole FaxSend[8269]: --> [2:OK]
Nov 10 09:54:40 southpole FaxSend[8269]: <-- [7:ATS0=0\r]
Nov 10 09:54:40 southpole FaxSend[8269]: --> [2:OK]
Nov 10 09:54:40 southpole FaxSend[8269]: <-- [7:ATS8=2\r]
Nov 10 09:54:40 southpole FaxSend[8269]: --> [2:OK]
Nov 10 09:54:40 southpole FaxSend[8269]: <-- [8:ATS7=60\r]
Nov 10 09:54:40 southpole FaxSend[8269]: --> [2:OK]
Nov 10 09:54:40 southpole FaxSend[8269]: <-- [12:AT&H2&I2&R1\r]
Nov 10 09:54:41 southpole FaxSend[8269]: --> [2:OK]
Nov 10 09:54:41 southpole FaxSend[8269]: <-- [11:ATS13=1&D2\r]
Nov 10 09:54:41 southpole FaxSend[8269]: --> [2:OK]
Nov 10 09:54:41 southpole FaxSend[8269]: <-- [6:AT&C1\r]
Nov 10 09:54:41 southpole FaxSend[8269]: --> [2:OK]
Nov 10 09:54:41 southpole FaxSend[8269]: <-- [12:AT+FCLASS=?\r]
Nov 10 09:54:41 southpole FaxSend[8269]: --> [7:0,1,2.0]
Nov 10 09:54:41 southpole FaxSend[8269]: --> [2:OK]
Nov 10 09:54:41 southpole FaxSend[8269]: MODEM Supports "Data"
Nov 10 09:54:41 southpole FaxSend[8269]: MODEM Supports "Class 1"
Nov 10 09:54:41 southpole FaxSend[8269]: MODEM Supports "Class 2.0"
Nov 10 09:54:41 southpole FaxSend[8269]: <-- [12:AT+FCLASS=1\r]
Nov 10 09:54:42 southpole FaxSend[8269]: --> [2:OK]
Nov 10 09:54:42 southpole FaxSend[8269]: MODEM: Mfr USR
Nov 10 09:54:42 southpole FaxSend[8269]: <-- [5:ATI3\r]
Nov 10 09:54:42 southpole FaxSend[8269]: --> [37:U.S. Robotics 56K Message Rev. 14.9.1]
Nov 10 09:54:42 southpole FaxSend[8269]: --> [2:OK]
Nov 10 09:54:42 southpole FaxSend[8269]: <-- [5:ATI7\r]
Nov 10 09:54:42 southpole FaxSend[8269]: --> [24:Configuration Profile...]
Nov 10 09:54:42 southpole FaxSend[8269]: --> [38:Product type CTR-21 External]
Nov 10 09:54:42 southpole FaxSend[8269]: --> [31:Product ID: 24566801]
Nov 10 09:54:42 southpole FaxSend[8269]: --> [48:Options V32bis,V.80,V.34+,x2,V.90]
Nov 10 09:54:42 southpole FaxSend[8269]: --> [40:Fax Options Class 1/Class 2.0]
Nov 10 09:54:42 southpole FaxSend[8269]: --> [32:Line Options Caller ID]
Nov 10 09:54:42 southpole FaxSend[8269]: --> [40:Voice Options Speakerphone, TAD]
Nov 10 09:54:42 southpole FaxSend[8269]: --> [30:Clock Freq 92.0Mhz]
Nov 10 09:54:42 southpole FaxSend[8269]: --> [27:EPROM 256k]
Nov 10 09:54:42 southpole FaxSend[8269]: --> [26:RAM 32k]
Nov 10 09:54:42 southpole FaxSend[8269]: --> [30:FLASH date 2/26/99]
Nov 10 09:54:42 southpole FaxSend[8269]: --> [29:FLASH rev 14.9.1]
Nov 10 09:54:42 southpole FaxSend[8269]: --> [30:DSP date 2/26/99]
Nov 10 09:54:42 southpole FaxSend[8269]: --> [29:DSP rev 14.9.1]
Nov 10 09:54:42 southpole FaxSend[8269]: --> [2:OK]
Nov 10 09:54:42 southpole FaxSend[8269]: MODEM: Model U.S. Robotics 56K Message Rev. 14.9.1
Nov 10 09:54:42 southpole FaxSend[8269]: MODEM: Revision Configuration Profile... Product type CTR-21 External Product ID: 24566801 Options V32bis,V.80,V.34+,x2,V.90 Fax Options Class 1/Class 2.0 Line Options Caller ID Voice Options Speakerphone, TAD Clock Freq 92.0Mhz EPROM 256k RAM 32k FLASH date 2/26/99 FLASH rev 14.9.1 DSP date 2/26/99 DSP rev 14.9.1
Nov 10 09:54:42 southpole FaxSend[8269]: <-- [9:AT+FTM=?\r]
Nov 10 09:54:43 southpole FaxSend[8269]: --> [41:3,24,48,72,73,74,96,97,98,121,122,145,146]
Nov 10 09:54:43 southpole FaxSend[8269]: --> [2:OK]
Nov 10 09:54:43 southpole FaxSend[8269]: MODEM Supports 3.85 line/mm
Nov 10 09:54:43 southpole FaxSend[8269]: MODEM Supports 7.7 line/mm
Nov 10 09:54:43 southpole FaxSend[8269]: MODEM Supports 2400 bit/s
Nov 10 09:54:43 southpole FaxSend[8269]: MODEM Supports 4800 bit/s
Nov 10 09:54:43 southpole FaxSend[8269]: MODEM Supports 7200 bit/s
Nov 10 09:54:43 southpole FaxSend[8269]: MODEM Supports 9600 bit/s
Nov 10 09:54:43 southpole FaxSend[8269]: MODEM Supports 12000 bit/s
Nov 10 09:54:43 southpole FaxSend[8269]: MODEM Supports 14400 bit/s
Nov 10 09:54:43 southpole FaxSend[8269]: MODEM Supports page width 1728 pixels in 215 mm
Nov 10 09:54:43 southpole FaxSend[8269]: MODEM Supports page width 2048 pixels in 255 mm
Nov 10 09:54:43 southpole FaxSend[8269]: MODEM Supports page width 2432 pixels in 303 mm
Nov 10 09:54:43 southpole FaxSend[8269]: MODEM Supports A4 page length (297 mm)
Nov 10 09:54:43 southpole FaxSend[8269]: MODEM Supports B4 page length (364 mm)
Nov 10 09:54:43 southpole FaxSend[8269]: MODEM Supports unlimited page length
Nov 10 09:54:43 southpole FaxSend[8269]: MODEM Supports 1-D MR
Nov 10 09:54:43 southpole FaxSend[8269]: MODEM Supports 2-D MR
Nov 10 09:54:43 southpole FaxSend[8269]: MODEM Supports 0 ms/scanline
Nov 10 09:54:43 southpole FaxSend[8269]: MODEM Supports 5 ms/scanline
Nov 10 09:54:43 southpole FaxSend[8269]: MODEM Supports 10 ms, 5 ms/scanline
Nov 10 09:54:43 southpole FaxSend[8269]: MODEM Supports 10 ms/scanline
Nov 10 09:54:43 southpole FaxSend[8269]: MODEM Supports 20 ms, 10 ms/scanline
Nov 10 09:54:43 southpole FaxSend[8269]: MODEM Supports 20 ms/scanline
Nov 10 09:54:43 southpole FaxSend[8269]: MODEM Supports 40 ms, 20 ms/scanline
Nov 10 09:54:43 southpole FaxSend[8269]: MODEM Supports 40 ms/scanline
Nov 10 09:54:43 southpole FaxSend[8269]: <-- [9:AT+FRM=?\r]
Nov 10 09:54:43 southpole FaxSend[8269]: --> [41:3,24,48,72,73,74,96,97,98,121,122,145,146]
Nov 10 09:54:43 southpole FaxSend[8269]: --> [2:OK]
Nov 10 09:54:43 southpole FaxSend[8269]: <-- [12:AT+FCLASS=1\r]
Nov 10 09:54:43 southpole FaxSend[8269]: --> [2:OK]
Nov 10 09:54:43 southpole FaxSend[8269]: <-- [12:AT+FCLASS=0\r]
Nov 10 09:54:44 southpole FaxSend[8269]: --> [2:OK]
Nov 10 09:54:44 southpole FaxSend[8269]: MODEM USR U.S. Robotics 56K Message Rev. 14.9.1/Configuration Profile... Product type CTR-21 External Product ID: 24566801 Options V32bis,V.80,V.34+,x2,V.90 Fax Options Class 1/Class 2.0 Line Options Caller ID Voice Options Speakerphone, TAD Clock Freq 92.0Mhz EPROM 256k RAM 32k FLASH date 2/26/99 FLASH rev 14.9.1 DSP date 2/26/99 DSP rev 14.9.1
Nov 10 09:54:44 southpole FaxSend[8269]: <-- [7:ATL1M1\r]
Nov 10 09:54:44 southpole FaxSend[8269]: --> [2:OK]
Nov 10 09:54:44 southpole FaxSend[8269]: STATE CHANGE: BASE -> RUNNING (timeout 30)
Nov 10 09:54:44 southpole FaxSend[8269]: MODEM input buffering disabled
Nov 10 09:54:44 southpole FaxSend[8269]: Apply CanonicalNumber rules to "0xxx"
Nov 10 09:54:44 southpole FaxSend[8269]: --> match rule "^0", result now "+49xxxx"
Nov 10 09:54:44 southpole FaxSend[8269]: --> return result "+49xxxx"
Nov 10 09:54:44 southpole FaxSend[8269]: Apply CanonicalNumber rules to "02xxxx"
Nov 10 09:54:44 southpole FaxSend[8269]: --> match rule "^0", result now "+49xxxx"
Nov 10 09:54:44 southpole FaxSend[8269]: --> return result "+49xxxx"
Nov 10 09:54:44 southpole FaxSend[8269]: SEND FAX: JOB 9 DEST 0xxxx COMMID 00000008 DEVICE '/dev/ttyS0'
Nov 10 09:56:42 southpole FaxSend[8269]: SEND FAX: JOB 9 SENT in 1:30
So, after the restart the fax was sended immediately and successful. Recipients's number was taken out.
