|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] Failure to train remote modem !?
On 2004.11.17 08:03 K.Balázs wrote:
I don't confirm that the receiver only supports 4800 baud.
The log with 0xFFF:
Nov 17 17:00:42.96: [26175]: SESSION BEGIN 000000316 **********
Nov 17 17:00:42.96: [26175]: HylaFAX (tm) Version 4.2.0
Nov 17 17:00:58.94: [26175]: <-- [9:AT+FRH=3\r]
Nov 17 17:00:58.98: [26175]: --> [7:CONNECT]
Nov 17 17:00:59.29: [26175]: --> HDLC<7:FF C8 01 00 52 0F 00>
Nov 17 17:00:59.29: [26175]: --> [2:OK]
Nov 17 17:00:59.29: [26175]: REMOTE best rate 4800 bit/s
It's true. The remote really only does support 4800 baud.
Nov 17 17:00:59.29: [26175]: REMOTE max A4 page width (215 mm)
Nov 17 17:00:59.29: [26175]: REMOTE max A4 page length (297 mm)
Nov 17 17:00:59.29: [26175]: REMOTE best vres 7.7 line/mm
Nov 17 17:00:59.29: [26175]: REMOTE best format 1-D MH
Nov 17 17:00:59.29: [26175]: REMOTE best 0 ms/scanline
Nov 17 17:00:59.29: [26175]: USE 4800 bit/s
Nov 17 17:00:59.29: [26175]: USE 0 ms/scanline
Nov 17 17:00:59.29: [26175]: SEND file "docq/doc193.ps;01"
Nov 17 17:00:59.29: [26175]: USE A4 page width (215 mm)
Nov 17 17:00:59.29: [26175]: USE A4 page length (297 mm)
Nov 17 17:00:59.29: [26175]: USE 7.7 line/mm
Nov 17 17:00:59.29: [26175]: USE 1-D MH
Nov 17 17:00:59.29: [26175]: SEND training at v.27ter 4800 bit/s
Nov 17 17:00:59.29: [26175]: <-- [9:AT+FTH=3\r]
Nov 17 17:01:00.33: [26175]: --> [7:CONNECT]
Nov 17 17:01:00.33: [26175]: <-- HDLC<23:FF C0 C2 8C 6C CC 4C CC 8C 2C
8C 6C
CC D4 04 04 04 04 04 04 04 04 04>
Nov 17 17:01:00.33: [26175]: <-- data [23]
Nov 17 17:01:00.33: [26175]: <-- data [2]
Nov 17 17:01:01.34: [26175]: --> [7:CONNECT]
Nov 17 17:01:01.34: [26175]: <-- HDLC<6:FF C8 C1 00 52 0E>
Nov 17 17:01:01.34: [26175]: <-- data [6]
Nov 17 17:01:01.34: [26175]: <-- data [2]
Nov 17 17:01:01.64: [26175]: --> [2:OK]
Nov 17 17:01:01.64: [26175]: DELAY 70 ms
Nov 17 17:01:01.71: [26175]: <-- [10:AT+FTM=48\r]
Nov 17 17:01:02.73: [26175]: --> [7:CONNECT]
Nov 17 17:01:02.73: [26175]: <-- data [900]
Nov 17 17:01:02.73: [26175]: <-- data [2]
Nov 17 17:01:04.29: [26175]: --> [2:]
Nov 17 17:01:04.29: [26175]: Problem sending TCF data
Nov 17 17:01:04.29: [26175]: <-- [9:AT+FRH=3\r]
Nov 17 17:01:04.29: [26175]: --> [2:OK]
Here's the problem. Notice that the modem responds with garbage at the
end of the TCF signal. (The [2:xx] just before the "Problem sending
TCF data".)
HylaFAX CVS-HEAD now ignores garbage from the modem at the end of the
TCF signal. So, you can wait until 4.2.1, you can get CVS-HEAD, or you
can apply the patch.
http://bugs.hylafax.org/bugzilla/show_bug.cgi?id=569
Lee.
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
