Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Multitech DID Inbound



Quoting Lee Howard <faxguy@xxxxxxxxxxxxxxxx>:

> On 2004.11.11 08:40 Wendell Dingus wrote:
> > I'm not local to the server so I asked the customer to do this. I
> > disabled
> > faxgetty, connected to the modem, factory defaulted it, set the
> > speaker on and
> > some volume, &W wrote the changes, exited, re-enabled faxgetty. What I
> > don't
> > know though is if faxgetty undid that change for me?
> 
> Yup.  Setting the speaker volume is part of the initialization process 
> that HylaFAX follows (faxgetty and faxsend).
> 
> Assuming that your ModemSetVolumeCmd is correct (and I think the 
> default is), you set "SpeakerVolume: medium" in your modem config file 
> and then restart faxgetty.
> 
> Lee.
> 

Thanks, RTFM does occasionally work :)   

OK, so I have the speaker volume set to high now. I had the customer repeat the
test and he sees the lights on the modem come on indicating it's answering a
call but still hears nothing. So if I dial the number voice and hear it answer
or send a fax and hear my fax machine negotiating but there's no sound on the
other end, what's up? A wiring or physical problem on the telco side? Hmm...

Thanks in advance!

Here is the entire config file as of right now:

CountryCode:            1
AreaCode:               423
FAXNumber:              +1.423.555.5555
LongDistancePrefix:     1
InternationalPrefix:    011
DialStringRules:        etc/dialrules
ServerTracing:          1
SessionTracing:         11
RecvFileMode:           0600
LogFileMode:            0600
DeviceMode:             0600
RingsBeforeAnswer:      1
ModemSetVolumeCmd:   "ATM0 ATM1L1 ATM1L3 ATM1L5 ATM1L7"
SpeakerVolume:          high
GettyArgs:              "-h %l dx_%s"
LocalIdentifier:        "NothingSetup"
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%P of %%T"
MaxRecvPages:           25
#

ModemType:              Class1.0                # use this to supply a hint
ModemFlowControl:       rtscts          # many firmwares have broken software
flow control
Class1TCFRecvHack:      yes             # avoid +FCERROR before TCF
# Class1MsgRecvHackCmd: AT+FRS=1        # avoid +FCERROR before image
Class1TMConnectDelay:   400             # counteract quick CONNECT response

# If your line supports Caller-ID, you may want to uncomment this...
# QualifyCID:           etc/cid         # you must create this file
# ModemResetCmds:       AT+VCID=1
# CIDNumber:            "NMBR="
# CIDName:              "NAME="

# Or with the MT5634ZBA-DID you'll probably need something like...
ModemReadyCmds: AT*DS1*DD0*DF1*DN4      # enable DTMF-DID, wink-start, 4 digits
CIDNumber:              "DTMF"          # format of AT*DF1
CIDNumberAnswerLength:  4       # four DTMF-DID digits then ATA




____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services