Re: [hylafax-users] Multitech DID Inbound

To: hylafax-users@xxxxxxxxxxx
Subject: Re: [hylafax-users] Multitech DID Inbound
From: Wendell Dingus <wendell@xxxxxxxxxxxxx>
Date: Thu, 11 Nov 2004 11:40:00 -0500

I'm not local to the server so I asked the customer to do this. I disabled
faxgetty, connected to the modem, factory defaulted it, set the speaker on and
some volume, &W wrote the changes, exited, re-enabled faxgetty. What I don't
know though is if faxgetty undid that change for me? I didn't see anything
about setting speaker status or volume in the config.ttyQ1a5 file or I would
have changed it there. 

Anyway, no he did not hear the fax/carrier tones but of course did see the
lights light up on the front of the modem like crazy when it answered. If there
is no audio through the speaker does that possibly indicate a wiring problem or
something like that? It could also just be that faxgetty turned the speaker
right back off on me I suppose...

Thanks!

Quoting Steve Tuckner <STUCKNER@xxxxxxxxxxxxx>:

> If you turn on the speaker (make sure ATM2 is set), do you hear the calling
> fax machine through the modem's speaker?
> 
> Steve Tuckner
> Multi-Tech Systems
> 
> > -----Original Message-----
> > From: hylafax-users-bounce@xxxxxxxxxxx
> > [mailto:hylafax-users-bounce@xxxxxxxxxxx]On Behalf Of Wendell Dingus
> > Sent: Thursday, November 04, 2004 8:09 PM
> > To: Lee Howard
> > Cc: hylafax-users@xxxxxxxxxxx
> > Subject: Re: [hylafax-users] Multitech DID Inbound
> >
> >
> > Quoting Lee Howard <faxguy@xxxxxxxxxxxxxxxx>:
> >
> > > On 2004.11.03 08:07 Wendell Dingus wrote:
> > >
> > > > I see this in /var/log/messages:
> > > > Nov  3 08:41:15 mail FaxGetty[8800]: ANSWER: CID NUMBER
> > "3210" NAME ""
> > > > Nov  3 08:41:23 mail FaxGetty[8800]: ANSWER: FAX
> > CONNECTION  DEVICE
> > > > '/dev/ttyQ1a5'
> > > > Nov  3 08:42:10 mail FaxGetty[8800]: MODEM LT V.92 1.0
> > MT5634ZBA-DID
> > > > SERIAL
> > > > DATA/FAX/DID MODEM VERSION 1.28C LT V.92 1.0 MT5634ZBA-DID Serial
> > > > Data/Fax/DID
> > > > Modem Version 1.28c/
> > >
> > > What does the session log (/var/spool/hylafax/log/c*) say?
> > >
> > > Lee.
> > >
> >
> >
> > Thanks... I was only looking in /var/log and didn't even
> > think to look at any of
> > those logs, doh!  Here's one:
> >
> > Nov 04 14:59:29.51: [ 8800]: SESSION BEGIN 000000032 19999999999
> > Nov 04 14:59:29.51: [ 8800]: HylaFAX (tm) Version 4.2.0
> > Nov 04 14:59:29.51: [ 8800]: <-- [4:ATA\r]
> > Nov 04 14:59:38.19: [ 8800]: --> [7:CONNECT]
> > Nov 04 14:59:38.19: [ 8800]: ANSWER: FAX CONNECTION  DEVICE
> > '/dev/ttyQ1a5'
> > Nov 04 14:59:38.19: [ 8800]: RECV FAX: begin
> > Nov 04 14:59:38.19: [ 8800]: <-- data [32]
> > Nov 04 14:59:38.19: [ 8800]: <-- data [2]
> > Nov 04 14:59:38.25: [ 8800]: --> [7:CONNECT]
> > Nov 04 14:59:38.25: [ 8800]: <-- data [23]
> > Nov 04 14:59:38.25: [ 8800]: <-- data [2]
> > Nov 04 14:59:38.29: [ 8800]: --> [7:CONNECT]
> > Nov 04 14:59:38.29: [ 8800]: <-- data [10]
> > Nov 04 14:59:38.29: [ 8800]: <-- data [2]
> > Nov 04 14:59:40.57: [ 8800]: --> [2:OK]
> > Nov 04 14:59:40.57: [ 8800]: <-- [9:AT+FRH=3\r]
> > Nov 04 14:59:43.67: [ 8800]: --> [0:]
> > Nov 04 14:59:43.67: [ 8800]: MODEM <Empty line>
> > Nov 04 14:59:43.67: [ 8800]: <-- data [1]
> > Nov 04 14:59:43.69: [ 8800]: --> [2:]
> > Nov 04 14:59:43.69: [ 8800]: --> [2:OK]
> > Nov 04 14:59:43.69: [ 8800]: DELAY 1500 ms
> > Nov 04 14:59:45.19: [ 8800]: <-- [9:AT+FTH=3\r]
> > Nov 04 14:59:46.17: [ 8800]: --> [7:CONNECT]
> > Nov 04 14:59:46.17: [ 8800]: <-- data [32]
> > Nov 04 14:59:46.17: [ 8800]: <-- data [2]
> > Nov 04 14:59:46.21: [ 8800]: --> [7:CONNECT]
> > Nov 04 14:59:46.21: [ 8800]: <-- data [23]
> > Nov 04 14:59:46.21: [ 8800]: <-- data [2]
> > Nov 04 14:59:46.25: [ 8800]: --> [7:CONNECT]
> > Nov 04 14:59:46.25: [ 8800]: <-- data [10]
> > Nov 04 14:59:46.25: [ 8800]: <-- data [2]
> > Nov 04 14:59:48.53: [ 8800]: --> [2:OK]
> > Nov 04 14:59:48.53: [ 8800]: <-- [9:AT+FRH=3\r]
> > Nov 04 14:59:51.63: [ 8800]: --> [0:]
> > Nov 04 14:59:51.63: [ 8800]: MODEM <Empty line>
> > Nov 04 14:59:51.63: [ 8800]: <-- data [1]
> > Nov 04 14:59:51.65: [ 8800]: --> [2:]
> > Nov 04 14:59:51.65: [ 8800]: --> [2:OK]
> > Nov 04 14:59:51.65: [ 8800]: DELAY 1500 ms
> > Nov 04 14:59:53.15: [ 8800]: <-- [9:AT+FTH=3\r]
> > Nov 04 14:59:54.13: [ 8800]: --> [7:CONNECT]
> > Nov 04 14:59:54.13: [ 8800]: <-- data [32]
> > Nov 04 14:59:54.13: [ 8800]: <-- data [2]
> > Nov 04 14:59:54.17: [ 8800]: --> [7:CONNECT]
> > Nov 04 14:59:54.17: [ 8800]: <-- data [23]
> > Nov 04 14:59:54.17: [ 8800]: <-- data [2]
> > Nov 04 14:59:54.21: [ 8800]: --> [7:CONNECT]
> > Nov 04 14:59:54.21: [ 8800]: <-- data [10]
> > Nov 04 14:59:54.21: [ 8800]: <-- data [2]
> > Nov 04 14:59:56.49: [ 8800]: --> [2:OK]
> > Nov 04 14:59:56.49: [ 8800]: <-- [9:AT+FRH=3\r]
> > Nov 04 14:59:59.59: [ 8800]: --> [0:]
> > Nov 04 14:59:59.59: [ 8800]: MODEM <Empty line>
> > Nov 04 14:59:59.59: [ 8800]: <-- data [1]
> > Nov 04 14:59:59.61: [ 8800]: --> [2:]
> > Nov 04 14:59:59.61: [ 8800]: --> [2:OK]
> > Nov 04 14:59:59.61: [ 8800]: DELAY 1500 ms
> > Nov 04 15:00:01.11: [ 8800]: <-- [9:AT+FTH=3\r]
> > Nov 04 15:00:02.09: [ 8800]: --> [7:CONNECT]
> > Nov 04 15:00:02.09: [ 8800]: <-- data [32]
> > Nov 04 15:00:02.09: [ 8800]: <-- data [2]
> > Nov 04 15:00:02.13: [ 8800]: --> [7:CONNECT]
> > Nov 04 15:00:02.13: [ 8800]: <-- data [23]
> > Nov 04 15:00:02.13: [ 8800]: <-- data [2]
> > Nov 04 15:00:02.17: [ 8800]: --> [7:CONNECT]
> > Nov 04 15:00:02.17: [ 8800]: <-- data [10]
> > Nov 04 15:00:02.17: [ 8800]: <-- data [2]
> > Nov 04 15:00:04.45: [ 8800]: --> [2:OK]
> > Nov 04 15:00:04.45: [ 8800]: <-- [9:AT+FRH=3\r]
> > Nov 04 15:00:07.55: [ 8800]: --> [0:]
> > Nov 04 15:00:07.55: [ 8800]: MODEM <Empty line>
> > Nov 04 15:00:07.55: [ 8800]: <-- data [1]
> > Nov 04 15:00:07.57: [ 8800]: --> [2:]
> > Nov 04 15:00:07.57: [ 8800]: --> [2:OK]
> > Nov 04 15:00:07.57: [ 8800]: DELAY 1500 ms
> > Nov 04 15:00:09.07: [ 8800]: <-- [9:AT+FTH=3\r]
> > Nov 04 15:00:10.05: [ 8800]: --> [7:CONNECT]
> > Nov 04 15:00:10.05: [ 8800]: <-- data [32]
> > Nov 04 15:00:10.05: [ 8800]: <-- data [2]
> > Nov 04 15:00:10.09: [ 8800]: --> [7:CONNECT]
> > Nov 04 15:00:10.09: [ 8800]: <-- data [23]
> > Nov 04 15:00:10.09: [ 8800]: <-- data [2]
> > Nov 04 15:00:10.13: [ 8800]: --> [7:CONNECT]
> > Nov 04 15:00:10.13: [ 8800]: <-- data [10]
> > Nov 04 15:00:10.13: [ 8800]: <-- data [2]
> > Nov 04 15:00:12.41: [ 8800]: --> [2:OK]
> > Nov 04 15:00:12.41: [ 8800]: <-- [9:AT+FRH=3\r]
> > Nov 04 15:00:15.51: [ 8800]: --> [0:]
> > Nov 04 15:00:15.51: [ 8800]: MODEM <Empty line>
> > Nov 04 15:00:15.51: [ 8800]: <-- data [1]
> > Nov 04 15:00:15.53: [ 8800]: --> [2:]
> > Nov 04 15:00:15.53: [ 8800]: --> [2:OK]
> > Nov 04 15:00:15.53: [ 8800]: DELAY 1500 ms
> > Nov 04 15:00:17.03: [ 8800]: <-- [9:AT+FTH=3\r]
> > Nov 04 15:00:18.01: [ 8800]: --> [7:CONNECT]
> > Nov 04 15:00:18.01: [ 8800]: <-- data [32]
> > Nov 04 15:00:18.01: [ 8800]: <-- data [2]
> > Nov 04 15:00:18.05: [ 8800]: --> [7:CONNECT]
> > Nov 04 15:00:18.05: [ 8800]: <-- data [23]
> > Nov 04 15:00:18.05: [ 8800]: <-- data [2]
> > Nov 04 15:00:18.09: [ 8800]: --> [7:CONNECT]
> > Nov 04 15:00:18.09: [ 8800]: <-- data [10]
> > Nov 04 15:00:18.09: [ 8800]: <-- data [2]
> > Nov 04 15:00:20.37: [ 8800]: --> [2:OK]
> > Nov 04 15:00:20.37: [ 8800]: <-- [9:AT+FRH=3\r]
> > Nov 04 15:00:23.47: [ 8800]: --> [0:]
> > Nov 04 15:00:23.47: [ 8800]: MODEM <Empty line>
> > Nov 04 15:00:23.47: [ 8800]: <-- data [1]
> > Nov 04 15:00:23.49: [ 8800]: --> [2:]
> > Nov 04 15:00:23.49: [ 8800]: --> [2:OK]
> > Nov 04 15:00:23.49: [ 8800]: RECV FAX: No answer (T.30 T1 timeout)
> > Nov 04 15:00:23.49: [ 8800]: RECV FAX: end
> > Nov 04 15:00:23.49: [ 8800]: SESSION END
> >
> >
> > ____________________ HylaFAX(tm) Users Mailing List
> > _______________________
> >   To subscribe/unsubscribe, click
> > http://lists.hylafax.org/cgi-bin/lsg2.cgi
> >  On UNIX: mail -s unsubscribe
> > hylafax-users-request@xxxxxxxxxxx < /dev/null
> >   *To learn about commercial HylaFAX(tm) support, mail
> > sales@xxxxxxxxx*
> >
> 
> 



----- End forwarded message -----




____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

Follow-Ups:
- Re: [hylafax-users] Multitech DID Inbound
  - From: Aidan Van Dyk
- Re: [hylafax-users] Multitech DID Inbound
  - From: Lee Howard

Prev by Date: Re: [hylafax-users] Send fax from a remote computer with postfix and the format <faxn umber>@FAX.domain.com
Next by Date: Re: [hylafax-users] Multitech DID Inbound
Previous by thread: Re: [hylafax-users] Multitech DID Inbound
Next by thread: Re: [hylafax-users] Multitech DID Inbound
Index(es):
- Main
- Thread

Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services