Re: [hylafax-users] Multitech DID Inbound

To: "'Wendell Dingus'" <wendell@xxxxxxxxxxxxx>, "'Lee Howard'" <faxguy@xxxxxxxxxxxxxxxx>
Subject: Re: [hylafax-users] Multitech DID Inbound
From: Steve Tuckner <STUCKNER@xxxxxxxxxxxxx>
Cc: hylafax-users@xxxxxxxxxxx
Reply-to: Steve Tuckner <sat@xxxxxxxxxxxxx>
Date: Fri, 5 Nov 2004 08:54:26 -0600

If you turn on the speaker (make sure ATM2 is set), do you hear the calling
fax machine through the modem's speaker?

Steve Tuckner
Multi-Tech Systems

> -----Original Message-----
> From: hylafax-users-bounce@xxxxxxxxxxx
> [mailto:hylafax-users-bounce@xxxxxxxxxxx]On Behalf Of Wendell Dingus
> Sent: Thursday, November 04, 2004 8:09 PM
> To: Lee Howard
> Cc: hylafax-users@xxxxxxxxxxx
> Subject: Re: [hylafax-users] Multitech DID Inbound
>
>
> Quoting Lee Howard <faxguy@xxxxxxxxxxxxxxxx>:
>
> > On 2004.11.03 08:07 Wendell Dingus wrote:
> >
> > > I see this in /var/log/messages:
> > > Nov  3 08:41:15 mail FaxGetty[8800]: ANSWER: CID NUMBER
> "3210" NAME ""
> > > Nov  3 08:41:23 mail FaxGetty[8800]: ANSWER: FAX
> CONNECTION  DEVICE
> > > '/dev/ttyQ1a5'
> > > Nov  3 08:42:10 mail FaxGetty[8800]: MODEM LT V.92 1.0
> MT5634ZBA-DID
> > > SERIAL
> > > DATA/FAX/DID MODEM VERSION 1.28C LT V.92 1.0 MT5634ZBA-DID Serial
> > > Data/Fax/DID
> > > Modem Version 1.28c/
> >
> > What does the session log (/var/spool/hylafax/log/c*) say?
> >
> > Lee.
> >
>
>
> Thanks... I was only looking in /var/log and didn't even
> think to look at any of
> those logs, doh!  Here's one:
>
> Nov 04 14:59:29.51: [ 8800]: SESSION BEGIN 000000032 19999999999
> Nov 04 14:59:29.51: [ 8800]: HylaFAX (tm) Version 4.2.0
> Nov 04 14:59:29.51: [ 8800]: <-- [4:ATA\r]
> Nov 04 14:59:38.19: [ 8800]: --> [7:CONNECT]
> Nov 04 14:59:38.19: [ 8800]: ANSWER: FAX CONNECTION  DEVICE
> '/dev/ttyQ1a5'
> Nov 04 14:59:38.19: [ 8800]: RECV FAX: begin
> Nov 04 14:59:38.19: [ 8800]: <-- data [32]
> Nov 04 14:59:38.19: [ 8800]: <-- data [2]
> Nov 04 14:59:38.25: [ 8800]: --> [7:CONNECT]
> Nov 04 14:59:38.25: [ 8800]: <-- data [23]
> Nov 04 14:59:38.25: [ 8800]: <-- data [2]
> Nov 04 14:59:38.29: [ 8800]: --> [7:CONNECT]
> Nov 04 14:59:38.29: [ 8800]: <-- data [10]
> Nov 04 14:59:38.29: [ 8800]: <-- data [2]
> Nov 04 14:59:40.57: [ 8800]: --> [2:OK]
> Nov 04 14:59:40.57: [ 8800]: <-- [9:AT+FRH=3\r]
> Nov 04 14:59:43.67: [ 8800]: --> [0:]
> Nov 04 14:59:43.67: [ 8800]: MODEM <Empty line>
> Nov 04 14:59:43.67: [ 8800]: <-- data [1]
> Nov 04 14:59:43.69: [ 8800]: --> [2:]
> Nov 04 14:59:43.69: [ 8800]: --> [2:OK]
> Nov 04 14:59:43.69: [ 8800]: DELAY 1500 ms
> Nov 04 14:59:45.19: [ 8800]: <-- [9:AT+FTH=3\r]
> Nov 04 14:59:46.17: [ 8800]: --> [7:CONNECT]
> Nov 04 14:59:46.17: [ 8800]: <-- data [32]
> Nov 04 14:59:46.17: [ 8800]: <-- data [2]
> Nov 04 14:59:46.21: [ 8800]: --> [7:CONNECT]
> Nov 04 14:59:46.21: [ 8800]: <-- data [23]
> Nov 04 14:59:46.21: [ 8800]: <-- data [2]
> Nov 04 14:59:46.25: [ 8800]: --> [7:CONNECT]
> Nov 04 14:59:46.25: [ 8800]: <-- data [10]
> Nov 04 14:59:46.25: [ 8800]: <-- data [2]
> Nov 04 14:59:48.53: [ 8800]: --> [2:OK]
> Nov 04 14:59:48.53: [ 8800]: <-- [9:AT+FRH=3\r]
> Nov 04 14:59:51.63: [ 8800]: --> [0:]
> Nov 04 14:59:51.63: [ 8800]: MODEM <Empty line>
> Nov 04 14:59:51.63: [ 8800]: <-- data [1]
> Nov 04 14:59:51.65: [ 8800]: --> [2:]
> Nov 04 14:59:51.65: [ 8800]: --> [2:OK]
> Nov 04 14:59:51.65: [ 8800]: DELAY 1500 ms
> Nov 04 14:59:53.15: [ 8800]: <-- [9:AT+FTH=3\r]
> Nov 04 14:59:54.13: [ 8800]: --> [7:CONNECT]
> Nov 04 14:59:54.13: [ 8800]: <-- data [32]
> Nov 04 14:59:54.13: [ 8800]: <-- data [2]
> Nov 04 14:59:54.17: [ 8800]: --> [7:CONNECT]
> Nov 04 14:59:54.17: [ 8800]: <-- data [23]
> Nov 04 14:59:54.17: [ 8800]: <-- data [2]
> Nov 04 14:59:54.21: [ 8800]: --> [7:CONNECT]
> Nov 04 14:59:54.21: [ 8800]: <-- data [10]
> Nov 04 14:59:54.21: [ 8800]: <-- data [2]
> Nov 04 14:59:56.49: [ 8800]: --> [2:OK]
> Nov 04 14:59:56.49: [ 8800]: <-- [9:AT+FRH=3\r]
> Nov 04 14:59:59.59: [ 8800]: --> [0:]
> Nov 04 14:59:59.59: [ 8800]: MODEM <Empty line>
> Nov 04 14:59:59.59: [ 8800]: <-- data [1]
> Nov 04 14:59:59.61: [ 8800]: --> [2:]
> Nov 04 14:59:59.61: [ 8800]: --> [2:OK]
> Nov 04 14:59:59.61: [ 8800]: DELAY 1500 ms
> Nov 04 15:00:01.11: [ 8800]: <-- [9:AT+FTH=3\r]
> Nov 04 15:00:02.09: [ 8800]: --> [7:CONNECT]
> Nov 04 15:00:02.09: [ 8800]: <-- data [32]
> Nov 04 15:00:02.09: [ 8800]: <-- data [2]
> Nov 04 15:00:02.13: [ 8800]: --> [7:CONNECT]
> Nov 04 15:00:02.13: [ 8800]: <-- data [23]
> Nov 04 15:00:02.13: [ 8800]: <-- data [2]
> Nov 04 15:00:02.17: [ 8800]: --> [7:CONNECT]
> Nov 04 15:00:02.17: [ 8800]: <-- data [10]
> Nov 04 15:00:02.17: [ 8800]: <-- data [2]
> Nov 04 15:00:04.45: [ 8800]: --> [2:OK]
> Nov 04 15:00:04.45: [ 8800]: <-- [9:AT+FRH=3\r]
> Nov 04 15:00:07.55: [ 8800]: --> [0:]
> Nov 04 15:00:07.55: [ 8800]: MODEM <Empty line>
> Nov 04 15:00:07.55: [ 8800]: <-- data [1]
> Nov 04 15:00:07.57: [ 8800]: --> [2:]
> Nov 04 15:00:07.57: [ 8800]: --> [2:OK]
> Nov 04 15:00:07.57: [ 8800]: DELAY 1500 ms
> Nov 04 15:00:09.07: [ 8800]: <-- [9:AT+FTH=3\r]
> Nov 04 15:00:10.05: [ 8800]: --> [7:CONNECT]
> Nov 04 15:00:10.05: [ 8800]: <-- data [32]
> Nov 04 15:00:10.05: [ 8800]: <-- data [2]
> Nov 04 15:00:10.09: [ 8800]: --> [7:CONNECT]
> Nov 04 15:00:10.09: [ 8800]: <-- data [23]
> Nov 04 15:00:10.09: [ 8800]: <-- data [2]
> Nov 04 15:00:10.13: [ 8800]: --> [7:CONNECT]
> Nov 04 15:00:10.13: [ 8800]: <-- data [10]
> Nov 04 15:00:10.13: [ 8800]: <-- data [2]
> Nov 04 15:00:12.41: [ 8800]: --> [2:OK]
> Nov 04 15:00:12.41: [ 8800]: <-- [9:AT+FRH=3\r]
> Nov 04 15:00:15.51: [ 8800]: --> [0:]
> Nov 04 15:00:15.51: [ 8800]: MODEM <Empty line>
> Nov 04 15:00:15.51: [ 8800]: <-- data [1]
> Nov 04 15:00:15.53: [ 8800]: --> [2:]
> Nov 04 15:00:15.53: [ 8800]: --> [2:OK]
> Nov 04 15:00:15.53: [ 8800]: DELAY 1500 ms
> Nov 04 15:00:17.03: [ 8800]: <-- [9:AT+FTH=3\r]
> Nov 04 15:00:18.01: [ 8800]: --> [7:CONNECT]
> Nov 04 15:00:18.01: [ 8800]: <-- data [32]
> Nov 04 15:00:18.01: [ 8800]: <-- data [2]
> Nov 04 15:00:18.05: [ 8800]: --> [7:CONNECT]
> Nov 04 15:00:18.05: [ 8800]: <-- data [23]
> Nov 04 15:00:18.05: [ 8800]: <-- data [2]
> Nov 04 15:00:18.09: [ 8800]: --> [7:CONNECT]
> Nov 04 15:00:18.09: [ 8800]: <-- data [10]
> Nov 04 15:00:18.09: [ 8800]: <-- data [2]
> Nov 04 15:00:20.37: [ 8800]: --> [2:OK]
> Nov 04 15:00:20.37: [ 8800]: <-- [9:AT+FRH=3\r]
> Nov 04 15:00:23.47: [ 8800]: --> [0:]
> Nov 04 15:00:23.47: [ 8800]: MODEM <Empty line>
> Nov 04 15:00:23.47: [ 8800]: <-- data [1]
> Nov 04 15:00:23.49: [ 8800]: --> [2:]
> Nov 04 15:00:23.49: [ 8800]: --> [2:OK]
> Nov 04 15:00:23.49: [ 8800]: RECV FAX: No answer (T.30 T1 timeout)
> Nov 04 15:00:23.49: [ 8800]: RECV FAX: end
> Nov 04 15:00:23.49: [ 8800]: SESSION END
>
>
> ____________________ HylaFAX(tm) Users Mailing List
> _______________________
>   To subscribe/unsubscribe, click
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe
> hylafax-users-request@xxxxxxxxxxx < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail
> sales@xxxxxxxxx*
>


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

References:
- Re: [hylafax-users] Multitech DID Inbound
  - From: Wendell Dingus

Prev by Date: [hylafax-users] Missing pages
Next by Date: Re: [hylafax-users] hylafax 4.20 modem empty line
Previous by thread: Re: [hylafax-users] Multitech DID Inbound
Next by thread: Re: [hylafax-users] Multitech DID Inbound
Index(es):
- Main
- Thread

Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services