Re: [hylafax-users] Debian sarge- Hylafax 4.2 - Kde clients

[Christian Lauinger <clauinger@xxxxxxxxxxxxxxxx>]

Lee Howard schrieb:
> On 2004.11.09 09:29 Christian Lauinger wrote:
>
> > Nov  9 17:21:55 conop01 FaxQueuer[5542]: Unknown configuration 
> > parameter "faxsendcmd" ignored at line 9
> > Nov  9 17:21:55 conop01 FaxQueuer[5542]: HylaFAX (tm) Version 4.2.0
> > Nov  9 17:21:55 conop01 FaxQueuer[5542]: Copyright (c) 1990-1996 Sam 
> > Leffler
> > Nov  9 17:21:55 conop01 FaxQueuer[5542]: Copyright (c) 1991-1996 
> > Silicon Graphics, Inc.
> > Nov  9 17:21:55 conop01 HylaFAX[5544]: HylaFAX INET Protocol Server: 
> > restarted.
> >
> > But in Docu i found the parameter faxsendcmd !?
> > What is my problem ?
>
>
> It is "SendFaxCmd", defaulting to faxsend.
Hello,

yes, my fault sorry.

> Lee.

Now my Hylafaxserver uses c2sendfax, but does not send any faxes.

Nov 10 11:25:26 conop01 FaxQueuer[12013]: JOB 29 (active dest 0695332 
pri 126 tts 0:00 killtime 2:59:00): CMD DONE: exit status 0
Nov 10 11:25:26 conop01 FaxQueuer[12013]: JOB 29 (ready dest 0695332 pri 
125 tts 0:00 killtime 2:59:00): SEND INCOMPLETE: retry immediately; An 
error occured while trying to establish the connection.
Nov 10 11:25:26 conop01 FaxQueuer[12013]: JOB 29 (ready dest 0695332 pri 
125 tts 0:00 killtime 2:59:00): READY
Nov 10 11:25:26 conop01 FaxQueuer[12013]: JOB 29 (ready dest 0695332 pri 
125 tts 0:00 killtime 2:59:00): PROCESS
Nov 10 11:25:26 conop01 FaxQueuer[12013]: JOB 29 (active dest 0695332 
pri 125 tts 0:00 killtime 2:59:00): ACTIVE
Nov 10 11:25:27 conop01 FaxQueuer[12013]: JOB 29 (active dest 0695332 
pri 125 tts 0:00 killtime 2:58:59): CMD START /usr/bin/c2faxsend -m 
faxCAPI sendq/q29 (PID 12086)
Nov 10 11:25:27 conop01 kernel: kcapi: handle_message: applid 3 state 
released (LISTEN_CONF                ID=003 #0x0000 LEN=0014
Nov 10 11:25:27 conop01 kernel:   Controller/PLCI/NCCI            = 0x1
Nov 10 11:25:27 conop01 kernel:   Info                            = 0x0
Nov 10 11:25:27 conop01 kernel: )
Nov 10 11:25:27 conop01 kernel: dev_del_timer: timer(83e8bec) not running
Nov 10 11:25:27 conop01 kernel: dev_del_timer: timer(83e8bc4) not running
Nov 10 11:25:27 conop01 kernel: dev_del_timer: timer(83e8bc4) not running
Nov 10 11:25:27 conop01 kernel: dev_del_timer: timer(83e8bec) not running
Nov 10 11:25:27 conop01 FaxQueuer[12013]: JOB 29 (active dest 0695332 
pri 125 tts 0:00 killtime 2:58:59): CMD DONE: exit status 0
Nov 10 11:25:27 conop01 FaxQueuer[12013]: JOB 29 (sleeping dest 0695332 
pri 124 tts 0:00 killtime 2:58:59): SEND INCOMPLETE: requeue for 7:13; 
An error occured while trying to establish the connection.
Nov 10 11:25:27 conop01 FaxQueuer[12013]: JOB 29 (sleeping dest 0695332 
pri 124 tts 0:00 killtime 2:58:59): SLEEP FOR 7:13
Nov 10 11:25:27 conop01 kernel: kcapi: handle_message: applid 3 state 
released (LISTEN_CONF                ID=003 #0x0000 LEN=0014
Nov 10 11:25:27 conop01 kernel:   Controller/PLCI/NCCI            = 0x1
Nov 10 11:25:27 conop01 kernel:   Info                            = 0x0
Nov 10 11:25:27 conop01 kernel: )

Don't know what's the problem is, I use the same controller (AVM B1) for 
send and recieving configured in config.faxCAPI. Recieving works fine.

Can you help me please.

Christian


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*