Re: [hylafax-users] hylafax use only one of two modems

[Abacus Computer <support@xxxxxxxxxxxxxxxxxxx>]

Hi,

I have tried to send a fax with specified modem. But there happens nothing 
and I cannot find an error message.

There a the document in the docq and in sendq also. But I cannot find any 
hint why it is not working.

What can I do?

best regards
Christian



At 12:24  26.09.03, you wrote:
>Content-Transfer-Encoding: 8bit
>Content-Disposition: inline
>
>Hi Christian
>
>man sendfax
>
>       -h [modem@]host[:port]
>                    Force  the  jobs to be processed on a specific
>                    host  and,  optionally,  using  a   particular
>                    modem.  The host may be either a symbolic name
>                    or a network address.  If no -h option is sup­
>                    plied,  sendfax uses the FAXSERVER environment
>                    variable to identify  the  HylaFAX  server  to
>                    which  the  jobs  should  be  directed.  If no
>                    server is specified then sendfax  attempts  to
>                    contact  a  server  on  the local host.  If no
>                    modem is specified, the job will be  submitted
>                    to any available modem.
>HIH
>
>-m
>
>
>
>Am Freitag, 26. September 2003 03:07 schrieb Abacus Computer:
> > Thanks,
> > but I am working with sendfax and I do not find any parameter to specify
> > the modem to fax.
> > Normally hylafax must use the second fax if the first is in use - or not?
> > Or need this a special configuration?
> >
> > How can I test ttyS1 by hylafax?
> >
> > regards
> > Christian
> >
> > At 09:25  25.09.03, you wrote:
> > >Hi Christian,
> > >
> > >try faxmodem ttyS1 and see if the faxes will be sent on ttyS1 too.
> > >
> > >HIH
> > >-m
> > >
> > >Am Donnerstag, 25. September 2003 16:54 schrieb Abacus Computer:
> > > > Hi,
> > > > I have running hylafax 4.1.5 on Redhat-linux 8.0 with two modems
> > > > Practical Peripherals Modem  Model # PM144MT II
> > > >
> > > > Both are installed and working on ttyS0 and ttyS1, tested with
> > > > miniserv, and both have the status "Running and idle".
> > > >
> > > > But if I send a lot of faxes (10) in a short time (1 minute) all faxes
> > > > are sent about ttyS0 one after another and nothing about ttyS1.
> > > > I have no idea what there are wrong.
> > > >
> > > > Best regards
> > > > Christian
> > > >
> > > >
> > > > ____________________ HylaFAX(tm) Users Mailing List
> > > > _______________________ To subscribe/unsubscribe, click
> > > > http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe
> > > > hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about
> > > > commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*
> > >
> > >--
> > >HAGOS eG                 phone: +49 711 7880592
> > >Matthias Reich             fax: +49 711 7880535
> > >Industriestr. 62           web: http://www.hagos.de
> > >D-70565 Stuttgart         mail: rei@xxxxxxxx
> > >Germany
> > >
> > >____________________ HylaFAX(tm) Users Mailing List
> > > _______________________ To subscribe/unsubscribe, click
> > > http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe
> > > hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial
> > > HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*
> >
> > ____________________ HylaFAX(tm) Users Mailing List _______________________
> >   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
> >  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
> >   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*
>
>--
>HAGOS eG                 phone: +49 711 7880592
>Matthias Reich             fax: +49 711 7880535
>Industriestr. 62           web: http://www.hagos.de
>D-70565 Stuttgart         mail: rei@xxxxxxxx
>Germany


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*