|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] problem with AT+FTS
Hello.
I have some trouble with hylafax (Version 4.1.6) under Debian Woody.
I compiled from source and all went ok.
The problem came when i try to send a fax. I get the "Stop and wait failure"
error.
The workaround I found (add the Class1SendEOPWaitCmd etc. options) did not
resolv the problem.
The modem is a "Hamlet H56XCT Data/Fax/Voice Modem".
Any hints ?
The output of the probemodem program is attached.
At least there is some pointer to the documentation to write a config for this
modem ?
bye
Gianluca
Now we are going to probe the tty port. This takes a few seconds,
so be patient. Note that if you do not have the modem cabled to
the port, or the modem is turned off, this may hang (just go and
cable up the modem or turn it on, or whatever).
Probing for best speed to talk to modem: 38400 OK.
This looks like a Class 1 modem.
ATI0 RESULT = "OK" RESPONSE = "Hamlet H56XCT Data/Fax/Voice Modem"
ATI1 RESULT = "OK" RESPONSE = "External Controller Ver1.20, CheckSum=B7E8"
ATI2 RESULT = "OK" RESPONSE = "TEST OK!"
ATI3 RESULT = "OK" RESPONSE = "Hamlet H56XCT Data/Fax/Voice Modem"
ATI4 RESULT = "OK" RESPONSE = "DSP Ver1.10 CheckSum=DC84"
ATI5 RESULT = "OK" RESPONSE = "Italy"
ATI6 RESULT = "OK" RESPONSE = "0"
ATI7 RESULT = "OK" RESPONSE = "Controller Ver1.20 Date:Oct 04 16:08"
ATI8 RESULT = "OK" RESPONSE = "DSP Ver1.10 Date:May 18 09:55"
ATI9 RESULT = "OK" RESPONSE = "Software Speakerphone"
Class 1 stuff...
AT+FCLASS=? RESULT = "OK" RESPONSE = "0,1,8"
AT+FCLASS? RESULT = "OK" RESPONSE = "0"
AT+FCLASS=0 RESULT = "OK" RESPONSE = "OK"
AT+FCLASS=1 RESULT = "OK" RESPONSE = "OK"
AT+FCLASS? RESULT = "OK" RESPONSE = "1"
AT+FJUNK=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FJUNK? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FAA=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FAA? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FAE=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FAE? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FTH=? RESULT = "OK" RESPONSE = "3"
AT+FRH=? RESULT = "OK" RESPONSE = "3"
AT+FTM=? RESULT = "OK" RESPONSE = "24,48,72,73,74,96,97,98,121,122,145,146"
AT+FRM=? RESULT = "OK" RESPONSE = "24,48,72,73,74,96,97,98,121,122,145,146"
AT+FTS=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FRS=? RESULT = "ERROR" RESPONSE = "ERROR"
