|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] problem with AT+FTS
On 2003.07.25 07:49 Gianluca Montecchi wrote:
>
> Hello.
>
> I have some trouble with hylafax (Version 4.1.6) under Debian Woody.
>
> I compiled from source and all went ok.
> The problem came when i try to send a fax. I get the "Stop and wait
> failure"
> error.
>
> The workaround I found (add the Class1SendEOPWaitCmd etc. options) did
> not
> resolv the problem.
There is no Class1SendEOPWaitCmd. Try adding:
Class1PPMWaitCmd: <delay:7>
Class1EOPWaitCmd: <delay:9>
Class1TCFWaitCmd: <delay:7>
Class1SwitchingCmd: <delay:7>
> AT+FTS=? RESULT = "ERROR" RESPONSE = "ERROR"
> AT+FRS=? RESULT = "ERROR" RESPONSE = "ERROR"
Unfortunately, this doesn't tell us much since it is supposed to
respond ERROR if it's not connected.
Lee.
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*
