Re: [hylafax-users] HylaFax and AVM and RH

["Marcin Giedz" <marcin.giedz@hermes-kredit.pl>]

Hi it's me again ;)

During last few days I was trying to set up and run AVM C4 Controller on
RH9 - with no results, but ... Here are some additional outputs

[root@marcin1 root]# capiinit show
driver firmware proto io irq mem cardnr options
c4 c4.bin DS1 - - - - P2P
c4  -        DS1 - - - - P2P
c4  -        DS1 - - - - P2P
c4  -        DS1 - - - - P2P

[root@marcin1 root]# capiinit status
1 c4 running c4-ec80 C4 3.09-11 0xec80 9 0xfe9ffc00
2 c4 running c4-ec80 C4 3.09-11 0xec80 9 0xfe9ffc00
3 c4 running c4-ec80 C4 3.09-11 0xec80 9 0xfe9ffc00
4 c4 running c4-ec80 C4 3.09-11 0xec80 9 0xfe9ffc00
In my point of view everything is correct and command:

c2faxsend -f TIFF -v -d 5291400 /usr/local/bin/fritz_pic.tif

May 24 10:46:27.87: [ 4094]: CapiFaxSend - INFO: Try to connect to fax
number 5291400 in TIFF mode on controller 1.

May 24 10:46:27.90: [ 4094]: CapiFaxSend - INFO: Dial and starting transfer
of TIFF-File /usr/local/bin/fritz_pic.tif with fine resolution.

should send fax to 5291400, but only 2 lines are generated by CapiFaxSend -
there are no lines like

Connection established.
        StationID = +49 XXXX XXXXXX
        BaudRate  = 14400
        Flags     = HighRes, No_ECM,
Fax file completely transfered.

It seems like my AVM C4 is not connected to line or there is something more
wrong??

Why standard pppd test for capi4linux is correct but I can't send or receive
faxes, maybe there is something wrong with my config.faxCAPI - I can't find
mistakes



Thanks,Marcin

















> ____________________ HylaFAX(tm) Users Mailing List
_______________________
>   To subscribe/unsubscribe, click
http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org <
/dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*
>
>
>

config.faxCAPI