[hylafax-users] Hylafax Fax Merge

To: "'hylafax-user@hylafax.org'" <hylafax-user@hylafax.org>
Subject: [hylafax-users] Hylafax Fax Merge
From: Chris Parsons <chrisp@infotec.com.au>
Date: Mon, 26 May 2003 12:36:57 +0930

I am attempting a fax merge from M$ Word and Cypheus using the cypheus tiff
printer. This part works fine. Its set to use g3 compression and all faxes
are properly queued in the fax server.
They can be viewed fine through Cypheus and pyla with almost all viewers.
The problem is that only the first page is sent properly, all pages after
this are blank. using g4 compression, everypage is blank. A log below is
included for the g3 case.
What is the problem?
Is there any other recommended way of doing a fax merge from word?

Thankyou

Chris.





May 16 16:40:55.36: [11454]: SESSION BEGIN 00042616 xx
May 16 16:40:55.36: [11454]: HylaFAX (tm) Version 4.1.1
May 16 16:40:55.36: [11454]: SEND FAX: JOB 19325 DEST xx COMMID 00042616
DEVICE '/dev/ttyI3'
May 16 16:40:55.36: [11454]: DELAY 75 ms
May 16 16:40:55.43: [11454]: DELAY 2600 ms
May 16 16:40:58.03: [11454]: <-- [4:ATZ\r]
May 16 16:40:58.04: [11454]: --> [2:OK]
May 16 16:40:58.04: [11454]: DELAY 3000 ms
May 16 16:41:01.04: [11454]: <-- [13:AT&Exx\r]
May 16 16:41:01.05: [11454]: --> [12:AT&Exx]
May 16 16:41:01.05: [11454]: --> [2:OK]
May 16 16:41:01.05: [11454]: <-- [5:ATE0\r]
May 16 16:41:01.06: [11454]: --> [4:ATE0]
May 16 16:41:01.06: [11454]: --> [2:OK]
May 16 16:41:01.06: [11454]: <-- [5:ATV1\r]
May 16 16:41:01.07: [11454]: --> [2:OK]
May 16 16:41:01.07: [11454]: <-- [5:ATQ0\r]
May 16 16:41:01.08: [11454]: --> [2:OK]
May 16 16:41:01.08: [11454]: <-- [7:ATS0=0\r]
May 16 16:41:01.09: [11454]: --> [2:OK]
May 16 16:41:01.09: [11454]: <-- [7:ATS8=2\r]
May 16 16:41:01.10: [11454]: --> [2:OK]
May 16 16:41:01.10: [11454]: <-- [8:ATS7=60\r]
May 16 16:41:01.11: [11454]: --> [2:OK]
May 16 16:41:01.11: [11454]: <-- [12:AT+FCLASS=2\r]
May 16 16:41:01.12: [11454]: --> [2:OK]
May 16 16:41:01.12: [11454]: <-- [10:AT+FTBC=0\r]
May 16 16:41:01.13: [11454]: --> [2:OK]
May 16 16:41:01.13: [11454]: <-- [10:AT+FBOR=0\r]
May 16 16:41:01.14: [11454]: --> [2:OK]
May 16 16:41:01.14: [11454]: <-- [13:AT+FPHCTO=30\r]
May 16 16:41:01.15: [11454]: --> [2:OK]
May 16 16:41:01.15: [11454]: <-- [24:AT+FDCC=1,5,2,2,3,1,0,0\r]
May 16 16:41:01.16: [11454]: --> [2:OK]
May 16 16:41:01.16: [11454]: <-- [5:ATM0\r]
May 16 16:41:01.17: [11454]: --> [2:OK]
May 16 16:41:01.17: [11454]: <-- [12:AT+FCLASS=2\r]
May 16 16:41:01.28: [11454]: --> [2:OK]
May 16 16:41:01.28: [11454]: <-- [10:AT+FTBC=0\r]
May 16 16:41:01.39: [11454]: --> [2:OK]
May 16 16:41:01.39: [11454]: <-- [10:AT+FBOR=0\r]
May 16 16:41:01.50: [11454]: --> [2:OK]
May 16 16:41:01.50: [11454]: <-- [13:AT+FPHCTO=30\r]
May 16 16:41:01.61: [11454]: --> [2:OK]
May 16 16:41:01.61: [11454]: <-- [24:AT+FDCC=1,5,2,2,3,1,0,0\r]
May 16 16:41:01.72: [11454]: --> [2:OK]
May 16 16:41:01.72: [11454]: <-- [21:AT+FLID="xx"\r]
May 16 16:41:01.83: [11454]: --> [2:OK]
May 16 16:41:01.87: [11454]: DIAL xx
May 16 16:41:01.87: [11454]: <-- [15:ATDTxx\r]
May 16 16:41:15.95: [11454]: --> [5:+FCON]
May 16 16:41:15.95: [11454]: --> [28:+FCSI:"xx"]
May 16 16:41:15.95: [11454]: REMOTE CSI "xx"
May 16 16:41:15.95: [11454]: --> [21:+FDIS:1,3,0,2,0,0,0,0]
May 16 16:41:15.95: [11454]: --> [2:OK]
May 16 16:41:15.95: [11454]: REMOTE best rate 9600 bit/s
May 16 16:41:15.95: [11454]: REMOTE max page width 1728 pixels in 215 mm
May 16 16:41:15.95: [11454]: REMOTE max unlimited page length 
May 16 16:41:15.95: [11454]: REMOTE best vres 7.7 line/mm
May 16 16:41:15.95: [11454]: REMOTE best format 1-D MR
May 16 16:41:15.95: [11454]: REMOTE best 0 ms/scanline
May 16 16:41:15.95: [11454]: USE 9600 bit/s
May 16 16:41:15.95: [11454]: USE 0 ms/scanline
May 16 16:41:15.95: [11454]: SEND file "docq/doc28908.tif;01"
May 16 16:41:15.95: [11454]: USE page width 1728 pixels in 215 mm
May 16 16:41:15.95: [11454]: USE unlimited page length 
May 16 16:41:15.95: [11454]: USE 7.7 line/mm
May 16 16:41:15.96: [11454]: USE 1-D MR
May 16 16:41:15.96: [11454]: <-- [24:AT+FDIS=1,3,0,2,0,0,0,0\r]
May 16 16:41:16.06: [11454]: --> [2:OK]
May 16 16:41:16.06: [11454]: <-- [7:AT+FDT\r]
May 16 16:41:21.51: [11454]: --> [21:+FDCS:1,3,0,2,0,0,0,0]
May 16 16:41:21.51: [11454]: --> [7:CONNECT]
May 16 16:41:21.51: [11454]: SEND wait for XON
May 16 16:41:21.51: [11454]: --> [1:]
May 16 16:41:21.51: [11454]: SEND begin page
May 16 16:41:21.64: [11454]: <-- data [1024]
May 16 16:41:21.64: [11454]: <-- data [1025]
May 16 16:41:21.70: [11454]: <-- data [1024]
May 16 16:41:21.74: [11454]: <-- data [1024]
May 16 16:41:22.43: [11454]: <-- data [1024]
May 16 16:41:24.35: [11454]: <-- data [1024]
May 16 16:41:26.91: [11454]: <-- data [1024]
May 16 16:41:29.47: [11454]: <-- data [1024]
May 16 16:41:32.03: [11454]: <-- data [1025]
May 16 16:41:34.59: [11454]: <-- data [1029]
May 16 16:41:36.51: [11454]: <-- data [1024]
May 16 16:41:36.54: [11454]: <-- data [1026]
May 16 16:41:39.10: [11454]: <-- data [1026]
May 16 16:41:39.74: [11454]: <-- data [1031]
May 16 16:41:41.63: [11454]: <-- data [1027]
May 16 16:41:42.27: [11454]: <-- data [1025]
May 16 16:41:43.55: [11454]: <-- data [1030]
May 16 16:41:43.58: [11454]: <-- data [1029]
May 16 16:41:44.22: [11454]: <-- data [1030]
May 16 16:41:44.86: [11454]: <-- data [1033]
May 16 16:41:46.75: [11454]: <-- data [1032]
May 16 16:41:47.39: [11454]: <-- data [1028]
May 16 16:41:48.67: [11454]: <-- data [1034]
May 16 16:41:49.31: [11454]: <-- data [1029]
May 16 16:41:49.95: [11454]: <-- data [1036]
May 16 16:41:51.23: [11454]: <-- data [1026]
May 16 16:41:51.26: [11454]: <-- data [1033]
May 16 16:41:51.90: [11454]: <-- data [1040]
May 16 16:41:53.79: [11454]: <-- data [698]
May 16 16:41:53.79: [11454]: SENT 29369 bytes of data
May 16 16:41:53.79: [11454]: <-- data [2]
May 16 16:41:53.82: [11454]: SEND end page
May 16 16:41:55.81: [11454]: --> [2:OK]
May 16 16:41:55.81: [11454]: SEND send EOP (no more pages or documents)
May 16 16:41:55.81: [11454]: <-- [9:AT+FET=2\r]
May 16 16:42:02.48: [11454]: --> [7:+FPTS:1]
May 16 16:42:02.48: [11454]: --> [7:+FHNG:0]
May 16 16:42:02.48: [11454]: REMOTE HANGUP: Normal and proper end of
connection (code 0)
May 16 16:42:02.48: [11454]: SEND recv MCF (message confirmation)
May 16 16:42:02.52: [11454]: SEND FAX (00042616): FROM c TO xx (page 1 of 1
sent in 0:47)
May 16 16:42:02.52: [11454]: SEND FAX (00042616): FROM 
c TO xx (docq/doc28908.tif;01 sent in 0:47)
May 16 16:42:03.43: [11454]: <-- [5:ATH0\r]
May 16 16:42:03.43: [11454]: --> [2:OK]
May 16 16:42:03.45: [11454]: SESSION END

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*

Follow-Ups:
- Re: [hylafax-users] Hylafax Fax Merge
  - From: hamacker

Prev by Date: Re: [hylafax-users] HylaFax and AVM and RH
Next by Date: [hylafax-users] Fax received and forward by mail attached tiff or pdf with zero K
Previous by thread: Re: [hylafax-users] Waiting for modem to come ready.
Next by thread: Re: [hylafax-users] Hylafax Fax Merge
Index(es):
- Main
- Thread

Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services