Re: [hylafax-users] Hylafax Fax Merge

To: Chris Parsons <chrisp@infotec.com.au>
Subject: Re: [hylafax-users] Hylafax Fax Merge
From: hamacker <hamacker@vidy.com.br>
Cc: "'hylafax-user@hylafax.org'" <hylafax-user@hylafax.org>
Date: Mon, 26 May 2003 09:44:55 -0300

To merge pages created from different applications you can use a 
postscript printer to export your print to a file1, file2, file3 and 
merge all pages to one .tiff (I prefer postscript) using ghostscript.
Read use.htm from ghostscript documentation to knows how to.

I have one front-end and howto to do this, but its in portuguese :
http://www.gladisto.hpg.ig.com.br/artigos/winps2pdf/winps2pdf.htm
http://www.gladisto.hpg.ig.com.br/artigos/hylafaxmanager/hylafaxmanager.htm

Bye.


Chris Parsons wrote:

> I am attempting a fax merge from M$ Word and Cypheus using the cypheus tiff
> printer. This part works fine. Its set to use g3 compression and all faxes
> are properly queued in the fax server.
> They can be viewed fine through Cypheus and pyla with almost all viewers.
> The problem is that only the first page is sent properly, all pages after
> this are blank. using g4 compression, everypage is blank. A log below is
> included for the g3 case.
> What is the problem?
> Is there any other recommended way of doing a fax merge from word?
> 
> Thankyou
> 
> Chris.
> 
> 
> 
> 
> 
> May 16 16:40:55.36: [11454]: SESSION BEGIN 00042616 xx
> May 16 16:40:55.36: [11454]: HylaFAX (tm) Version 4.1.1
> May 16 16:40:55.36: [11454]: SEND FAX: JOB 19325 DEST xx COMMID 00042616
> DEVICE '/dev/ttyI3'
> May 16 16:40:55.36: [11454]: DELAY 75 ms
> May 16 16:40:55.43: [11454]: DELAY 2600 ms
> May 16 16:40:58.03: [11454]: <-- [4:ATZ\r]
> May 16 16:40:58.04: [11454]: --> [2:OK]
> May 16 16:40:58.04: [11454]: DELAY 3000 ms
> May 16 16:41:01.04: [11454]: <-- [13:AT&Exx\r]
> May 16 16:41:01.05: [11454]: --> [12:AT&Exx]
> May 16 16:41:01.05: [11454]: --> [2:OK]
> May 16 16:41:01.05: [11454]: <-- [5:ATE0\r]
> May 16 16:41:01.06: [11454]: --> [4:ATE0]
> May 16 16:41:01.06: [11454]: --> [2:OK]
> May 16 16:41:01.06: [11454]: <-- [5:ATV1\r]
> May 16 16:41:01.07: [11454]: --> [2:OK]
> May 16 16:41:01.07: [11454]: <-- [5:ATQ0\r]
> May 16 16:41:01.08: [11454]: --> [2:OK]
> May 16 16:41:01.08: [11454]: <-- [7:ATS0=0\r]
> May 16 16:41:01.09: [11454]: --> [2:OK]
> May 16 16:41:01.09: [11454]: <-- [7:ATS8=2\r]
> May 16 16:41:01.10: [11454]: --> [2:OK]
> May 16 16:41:01.10: [11454]: <-- [8:ATS7=60\r]
> May 16 16:41:01.11: [11454]: --> [2:OK]
> May 16 16:41:01.11: [11454]: <-- [12:AT+FCLASS=2\r]
> May 16 16:41:01.12: [11454]: --> [2:OK]
> May 16 16:41:01.12: [11454]: <-- [10:AT+FTBC=0\r]
> May 16 16:41:01.13: [11454]: --> [2:OK]
> May 16 16:41:01.13: [11454]: <-- [10:AT+FBOR=0\r]
> May 16 16:41:01.14: [11454]: --> [2:OK]
> May 16 16:41:01.14: [11454]: <-- [13:AT+FPHCTO=30\r]
> May 16 16:41:01.15: [11454]: --> [2:OK]
> May 16 16:41:01.15: [11454]: <-- [24:AT+FDCC=1,5,2,2,3,1,0,0\r]
> May 16 16:41:01.16: [11454]: --> [2:OK]
> May 16 16:41:01.16: [11454]: <-- [5:ATM0\r]
> May 16 16:41:01.17: [11454]: --> [2:OK]
> May 16 16:41:01.17: [11454]: <-- [12:AT+FCLASS=2\r]
> May 16 16:41:01.28: [11454]: --> [2:OK]
> May 16 16:41:01.28: [11454]: <-- [10:AT+FTBC=0\r]
> May 16 16:41:01.39: [11454]: --> [2:OK]
> May 16 16:41:01.39: [11454]: <-- [10:AT+FBOR=0\r]
> May 16 16:41:01.50: [11454]: --> [2:OK]
> May 16 16:41:01.50: [11454]: <-- [13:AT+FPHCTO=30\r]
> May 16 16:41:01.61: [11454]: --> [2:OK]
> May 16 16:41:01.61: [11454]: <-- [24:AT+FDCC=1,5,2,2,3,1,0,0\r]
> May 16 16:41:01.72: [11454]: --> [2:OK]
> May 16 16:41:01.72: [11454]: <-- [21:AT+FLID="xx"\r]
> May 16 16:41:01.83: [11454]: --> [2:OK]
> May 16 16:41:01.87: [11454]: DIAL xx
> May 16 16:41:01.87: [11454]: <-- [15:ATDTxx\r]
> May 16 16:41:15.95: [11454]: --> [5:+FCON]
> May 16 16:41:15.95: [11454]: --> [28:+FCSI:"xx"]
> May 16 16:41:15.95: [11454]: REMOTE CSI "xx"
> May 16 16:41:15.95: [11454]: --> [21:+FDIS:1,3,0,2,0,0,0,0]
> May 16 16:41:15.95: [11454]: --> [2:OK]
> May 16 16:41:15.95: [11454]: REMOTE best rate 9600 bit/s
> May 16 16:41:15.95: [11454]: REMOTE max page width 1728 pixels in 215 mm
> May 16 16:41:15.95: [11454]: REMOTE max unlimited page length 
> May 16 16:41:15.95: [11454]: REMOTE best vres 7.7 line/mm
> May 16 16:41:15.95: [11454]: REMOTE best format 1-D MR
> May 16 16:41:15.95: [11454]: REMOTE best 0 ms/scanline
> May 16 16:41:15.95: [11454]: USE 9600 bit/s
> May 16 16:41:15.95: [11454]: USE 0 ms/scanline
> May 16 16:41:15.95: [11454]: SEND file "docq/doc28908.tif;01"
> May 16 16:41:15.95: [11454]: USE page width 1728 pixels in 215 mm
> May 16 16:41:15.95: [11454]: USE unlimited page length 
> May 16 16:41:15.95: [11454]: USE 7.7 line/mm
> May 16 16:41:15.96: [11454]: USE 1-D MR
> May 16 16:41:15.96: [11454]: <-- [24:AT+FDIS=1,3,0,2,0,0,0,0\r]
> May 16 16:41:16.06: [11454]: --> [2:OK]
> May 16 16:41:16.06: [11454]: <-- [7:AT+FDT\r]
> May 16 16:41:21.51: [11454]: --> [21:+FDCS:1,3,0,2,0,0,0,0]
> May 16 16:41:21.51: [11454]: --> [7:CONNECT]
> May 16 16:41:21.51: [11454]: SEND wait for XON
> May 16 16:41:21.51: [11454]: --> [1:]
> May 16 16:41:21.51: [11454]: SEND begin page
> May 16 16:41:21.64: [11454]: <-- data [1024]
> May 16 16:41:21.64: [11454]: <-- data [1025]
> May 16 16:41:21.70: [11454]: <-- data [1024]
> May 16 16:41:21.74: [11454]: <-- data [1024]
> May 16 16:41:22.43: [11454]: <-- data [1024]
> May 16 16:41:24.35: [11454]: <-- data [1024]
> May 16 16:41:26.91: [11454]: <-- data [1024]
> May 16 16:41:29.47: [11454]: <-- data [1024]
> May 16 16:41:32.03: [11454]: <-- data [1025]
> May 16 16:41:34.59: [11454]: <-- data [1029]
> May 16 16:41:36.51: [11454]: <-- data [1024]
> May 16 16:41:36.54: [11454]: <-- data [1026]
> May 16 16:41:39.10: [11454]: <-- data [1026]
> May 16 16:41:39.74: [11454]: <-- data [1031]
> May 16 16:41:41.63: [11454]: <-- data [1027]
> May 16 16:41:42.27: [11454]: <-- data [1025]
> May 16 16:41:43.55: [11454]: <-- data [1030]
> May 16 16:41:43.58: [11454]: <-- data [1029]
> May 16 16:41:44.22: [11454]: <-- data [1030]
> May 16 16:41:44.86: [11454]: <-- data [1033]
> May 16 16:41:46.75: [11454]: <-- data [1032]
> May 16 16:41:47.39: [11454]: <-- data [1028]
> May 16 16:41:48.67: [11454]: <-- data [1034]
> May 16 16:41:49.31: [11454]: <-- data [1029]
> May 16 16:41:49.95: [11454]: <-- data [1036]
> May 16 16:41:51.23: [11454]: <-- data [1026]
> May 16 16:41:51.26: [11454]: <-- data [1033]
> May 16 16:41:51.90: [11454]: <-- data [1040]
> May 16 16:41:53.79: [11454]: <-- data [698]
> May 16 16:41:53.79: [11454]: SENT 29369 bytes of data
> May 16 16:41:53.79: [11454]: <-- data [2]
> May 16 16:41:53.82: [11454]: SEND end page
> May 16 16:41:55.81: [11454]: --> [2:OK]
> May 16 16:41:55.81: [11454]: SEND send EOP (no more pages or documents)
> May 16 16:41:55.81: [11454]: <-- [9:AT+FET=2\r]
> May 16 16:42:02.48: [11454]: --> [7:+FPTS:1]
> May 16 16:42:02.48: [11454]: --> [7:+FHNG:0]
> May 16 16:42:02.48: [11454]: REMOTE HANGUP: Normal and proper end of
> connection (code 0)
> May 16 16:42:02.48: [11454]: SEND recv MCF (message confirmation)
> May 16 16:42:02.52: [11454]: SEND FAX (00042616): FROM c TO xx (page 1 of 1
> sent in 0:47)
> May 16 16:42:02.52: [11454]: SEND FAX (00042616): FROM 
> c TO xx (docq/doc28908.tif;01 sent in 0:47)
> May 16 16:42:03.43: [11454]: <-- [5:ATH0\r]
> May 16 16:42:03.43: [11454]: --> [2:OK]
> May 16 16:42:03.45: [11454]: SESSION END
> 
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*
> 


-- 
Todas as mensagens de hamacker@vvviiidddyyy.com.com.br estão sob
forma de licença GPL (General Public License) e podem
ser reproduzidas livremente em outros tipos de mídia
diferentes donde a mensagem original foi publicada
desde que este também esteje sob GPL.
Para maiores esclarecimentos leia a GPL em :
http://www.gnu.org/philosophy/philosophy.pt.html


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*

References:
- [hylafax-users] Hylafax Fax Merge
  - From: Chris Parsons
- [hylafax-users] Hylafax Fax Merge
  - From: Chris Parsons

Prev by Date: [hylafax-users] Can I send fax to the fax machine.. (with hylaFAX)
Next by Date: Re: [hylafax-users] Hylafax receives faxes at all incoming numbers
Previous by thread: [hylafax-users] Hylafax Fax Merge
Next by thread: [hylafax-users] Fax received and forward by mail attached tiff or pdf with zero K
Index(es):
- Main
- Thread

Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services