[hylafax-users] Ring detected without successful handshake

[Jean-Francois Bour <jfbour@perinfo.com>]

Hello,

I've hylafax-4.1.5 on a RedHat 9 and a modem MultiTech 33.6K MT2834ZDXIe

Most of the time there is no problem with the fax, I can send and receive.

But I can't receive a fax from a particular fax, I've this error:

It's my log
[ 1791]: SESSION BEGIN 00000088 33390412531
[ 1791]: HylaFAX (tm) Version 4.1.5
[ 1791]: <-- [4:ATA\r]
[ 1791]: --> [8:+FHNG:74]
[ 1791]: REMOTE HANGUP: T.30 T1 timeout after EOM received (code 74)
[ 1791]: ANSWER: Ring detected without successful handshake
[ 1791]: SESSION END

My config.ttyS0:
ModemType:		Class2		# use class 2 interface
ModemRate:		19200		# lock rate for DCE-DTE
ModemFlowControl:	rtscts		# default
ModemHardFlowCmd:	AT&E4		# hardware flow control
ModemSoftFlowCmd:	AT&E5		# software flow control
ModemSetupDTRCmd:	AT&D3		# setup so DTR drop resets modem
ModemSetupDCDCmd:	AT&C1		
ModemSetupAACmd:	AT+FAA=1	
ModemDialCmd:		ATDT%s		# T for tone dialing
Class2RecvDataTrigger:	"\022"		# character sent to modem to start recv


Thanks for your help.

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*