Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] Help! No response to EOP repeated 3 times
>
>Post your log file so others can see what the error messages are.
>
Here is the log from a typical fax that fails from a modem on the serial card
Jan 14 09:28:07.45: [ 414]: SESSION BEGIN 00000075 16106103378290
Jan 14 09:28:07.45: [ 414]: HylaFAX (tm) Version 4.1.3
Jan 14 09:28:07.45: [ 414]: SEND FAX: JOB 52 DEST 6103378290 COMMID
00000075 DEVICE '/dev/ttyS4'
Jan 14 09:28:07.45: [ 414]: DELAY 75 ms
Jan 14 09:28:07.53: [ 414]: DELAY 2600 ms
Jan 14 09:28:10.13: [ 414]: <-- [4:ATZ\r]
Jan 14 09:28:10.33: [ 414]: --> [2:OK]
Jan 14 09:28:10.33: [ 414]: DELAY 3000 ms
Jan 14 09:28:13.33: [ 414]: <-- [5:ATE0\r]
Jan 14 09:28:13.48: [ 414]: --> [4:ATE0]
Jan 14 09:28:13.48: [ 414]: --> [2:OK]
Jan 14 09:28:13.48: [ 414]: <-- [5:ATV1\r]
Jan 14 09:28:13.63: [ 414]: --> [2:OK]
Jan 14 09:28:13.63: [ 414]: <-- [5:ATQ0\r]
Jan 14 09:28:13.78: [ 414]: --> [2:OK]
Jan 14 09:28:13.78: [ 414]: <-- [7:ATS0=0\r]
Jan 14 09:28:13.93: [ 414]: --> [2:OK]
Jan 14 09:28:13.93: [ 414]: <-- [7:ATS8=2\r]
Jan 14 09:28:14.08: [ 414]: --> [2:OK]
Jan 14 09:28:14.08: [ 414]: <-- [8:ATS7=60\r]
Jan 14 09:28:14.23: [ 414]: --> [2:OK]
Jan 14 09:28:14.23: [ 414]: <-- [6:AT&K4\r]
Jan 14 09:28:14.37: [ 414]: --> [2:OK]
Jan 14 09:28:14.37: [ 414]: <-- [6:AT&D3\r]
Jan 14 09:28:14.51: [ 414]: --> [2:OK]
Jan 14 09:28:14.51: [ 414]: <-- [6:AT&C1\r]
Jan 14 09:28:14.66: [ 414]: --> [2:OK]
Jan 14 09:28:14.66: [ 414]: <-- [12:AT+FCLASS=2\r]
Jan 14 09:28:14.81: [ 414]: --> [2:OK]
Jan 14 09:28:14.81: [ 414]: <-- [10:AT+FTBC=0\r]
Jan 14 09:28:14.96: [ 414]: --> [2:OK]
Jan 14 09:28:14.96: [ 414]: <-- [10:AT+FBOR=0\r]
Jan 14 09:28:15.11: [ 414]: --> [2:OK]
Jan 14 09:28:15.11: [ 414]: <-- [13:AT+FPHCTO=30\r]
Jan 14 09:28:15.26: [ 414]: --> [2:OK]
Jan 14 09:28:15.26: [ 414]: <-- [24:AT+FDCC=1,3,2,2,1,0,0,0\r]
Jan 14 09:28:15.42: [ 414]: --> [2:OK]
Jan 14 09:28:15.42: [ 414]: <-- [5:ATM0\r]
Jan 14 09:28:15.57: [ 414]: --> [2:OK]
Jan 14 09:28:15.57: [ 414]: <-- [12:AT+FCLASS=2\r]
Jan 14 09:28:15.82: [ 414]: --> [2:OK]
Jan 14 09:28:15.82: [ 414]: <-- [10:AT+FTBC=0\r]
Jan 14 09:28:16.07: [ 414]: --> [2:OK]
Jan 14 09:28:16.07: [ 414]: <-- [10:AT+FBOR=0\r]
Jan 14 09:28:16.32: [ 414]: --> [2:OK]
Jan 14 09:28:16.32: [ 414]: <-- [13:AT+FPHCTO=30\r]
Jan 14 09:28:16.57: [ 414]: --> [2:OK]
Jan 14 09:28:16.57: [ 414]: <-- [24:AT+FDCC=1,3,2,2,1,0,0,0\r]
Jan 14 09:28:16.83: [ 414]: --> [2:OK]
Jan 14 09:28:16.83: [ 414]: <-- [23:AT+FLID="NothingSetup"\r]
Jan 14 09:28:17.09: [ 414]: --> [2:OK]
Jan 14 09:28:17.09: [ 414]: DIAL 6103378290
Jan 14 09:28:17.09: [ 414]: <-- [15:ATDT6103378290\r]
Jan 14 09:28:45.96: [ 414]: --> [5:+FCON]
Jan 14 09:28:47.73: [ 414]: --> [22:+FDIS: 1,3,0,2,1,0,0,5]
Jan 14 09:28:47.73: [ 414]: --> [2:OK]
Jan 14 09:28:47.73: [ 414]: REMOTE best rate 9600 bit/s
Jan 14 09:28:47.73: [ 414]: REMOTE max page width 1728 pixels in 215 mm
Jan 14 09:28:47.73: [ 414]: REMOTE max unlimited page length
Jan 14 09:28:47.73: [ 414]: REMOTE best vres 7.7 line/mm
Jan 14 09:28:47.73: [ 414]: REMOTE best format 2-D MR
Jan 14 09:28:47.73: [ 414]: REMOTE best 20 ms/scanline
Jan 14 09:28:47.73: [ 414]: USE 9600 bit/s
Jan 14 09:28:47.73: [ 414]: USE 20 ms/scanline
Jan 14 09:28:47.73: [ 414]: SEND file "docq/doc45.ps;70"
Jan 14 09:28:47.73: [ 414]: USE page width 1728 pixels in 215 mm
Jan 14 09:28:47.73: [ 414]: USE unlimited page length
Jan 14 09:28:47.73: [ 414]: USE 3.85 line/mm
Jan 14 09:28:47.73: [ 414]: USE 2-D MR
Jan 14 09:28:47.73: [ 414]: <-- [24:AT+FDIS=0,3,0,2,1,0,0,5\r]
Jan 14 09:28:47.99: [ 414]: --> [2:OK]
Jan 14 09:28:47.99: [ 414]: <-- [7:AT+FDT\r]
Jan 14 09:28:57.01: [ 414]: --> [22:+FDCS: 0,3,0,2,1,0,0,5]
Jan 14 09:28:57.22: [ 414]: --> [7:CONNECT]
Jan 14 09:28:57.22: [ 414]: SEND wait for XON
Jan 14 09:28:57.22: [ 414]: --> [1:]
Jan 14 09:28:57.22: [ 414]: SEND begin page
Jan 14 09:28:57.22: [ 414]: <-- data [1026]
Jan 14 09:28:57.22: [ 414]: <-- data [1035]
Jan 14 09:28:57.22: [ 414]: <-- data [1040]
Jan 14 09:28:57.22: [ 414]: <-- data [1036]
Jan 14 09:28:57.22: [ 414]: <-- data [1043]
Jan 14 09:28:58.94: [ 414]: <-- data [1029]
Jan 14 09:29:00.05: [ 414]: <-- data [1031]
Jan 14 09:29:01.54: [ 414]: <-- data [1035]
Jan 14 09:29:01.54: [ 414]: <-- data [1034]
Jan 14 09:29:03.06: [ 414]: <-- data [1049]
Jan 14 09:29:04.38: [ 414]: <-- data [1040]
Jan 14 09:29:05.68: [ 414]: <-- data [1032]
Jan 14 09:29:05.68: [ 414]: <-- data [1048]
Jan 14 09:29:06.91: [ 414]: <-- data [1033]
Jan 14 09:29:08.55: [ 414]: <-- data [1037]
Jan 14 09:29:10.40: [ 414]: <-- data [1034]
Jan 14 09:29:10.40: [ 414]: <-- data [1041]
Jan 14 09:29:12.17: [ 414]: <-- data [1031]
Jan 14 09:29:13.45: [ 414]: <-- data [1034]
Jan 14 09:29:15.21: [ 414]: <-- data [1031]
Jan 14 09:29:15.21: [ 414]: <-- data [1035]
Jan 14 09:29:16.24: [ 414]: <-- data [1039]
Jan 14 09:29:17.45: [ 414]: <-- data [1041]
Jan 14 09:29:19.15: [ 414]: <-- data [1040]
Jan 14 09:29:19.15: [ 414]: <-- data [1029]
Jan 14 09:29:20.69: [ 414]: <-- data [241]
Jan 14 09:29:20.69: [ 414]: SENT 25838 bytes of data
Jan 14 09:29:20.69: [ 414]: <-- data [2]
Jan 14 09:29:24.80: [ 414]: SEND end page
Jan 14 09:29:25.04: [ 414]: --> [2:OK]
Jan 14 09:29:25.04: [ 414]: SEND send EOP (no more pages or documents)
Jan 14 09:29:25.04: [ 414]: <-- [9:AT+FET=2\r]
Jan 14 09:29:42.88: [ 414]: --> [9:+FHNG: 54]
Jan 14 09:29:42.88: [ 414]: REMOTE HANGUP: No response to EOP
repeated 3 times (code 54)
Jan 14 09:29:42.88: [ 414]: <-- [5:ATH0\r]
Jan 14 09:29:42.88: [ 414]: --> [2:OK]
Jan 14 09:29:42.89: [ 414]: SESSION END
Thanks!
Paul Lorah
>--
>Cam Coble, A+, Network+
>IT Manager
>Roanoke Stamp
>www.usacustom.com
>
> "any sufficiently advanced technology
> is indistinguishable from magic."
> -- Arthur C. Clark
>
>____________________ HylaFAX(tm) Users Mailing List _______________________
> To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
> *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*
--
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*