[hylafax-users] Problems sending A4 Page

[Andrei Svirida <svirida@debitel.net>]

Hi all,

I have a problem sending a A4 Page with Hylafax, here is the session
log:
----
Aug 20 14:50:33.17: [24398]: --> [2:OK]
Aug 20 14:50:33.17: [24398]: <-- [9:AT+FPP=0\r]
Aug 20 14:50:33.38: [24398]: --> [2:OK]
Aug 20 14:50:33.38: [24398]: <-- [9:AT+FBO=0\r]
Aug 20 14:50:33.57: [24398]: --> [2:OK]
Aug 20 14:50:33.57: [24398]: <-- [10:AT+FCT=30\r]
Aug 20 14:50:33.77: [24398]: --> [2:OK]
Aug 20 14:50:33.77: [24398]: <-- [15:AT+FNR=1,1,1,0\r]
Aug 20 14:50:33.97: [24398]: --> [2:OK]
Aug 20 14:50:33.97: [24398]: <-- [9:AT+FIE=0\r]
Aug 20 14:50:34.18: [24398]: --> [2:OK]
Aug 20 14:50:34.18: [24398]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Aug 20 14:50:34.37: [24398]: --> [2:OK]
Aug 20 14:50:34.37: [24398]: <-- [29:AT+FLI="debitel Messageline"\r]
Aug 20 14:50:34.58: [24398]: --> [2:OK]
Aug 20 14:50:34.58: [24398]: DIAL 9354477
Aug 20 14:50:34.59: [24398]: <-- [12:ATDT9354477\r]
Aug 20 14:50:52.63: [24398]: --> [4:+FCO]
Aug 20 14:50:52.63: [24398]: --> [27:+FCI:"    +49 221 3091 409"]
Aug 20 14:50:52.63: [24398]: REMOTE CSI "+49 221 3091 409"
Aug 20 14:50:52.63: [24398]: --> [20:+FIS:1,5,0,2,1,1,0,3]
Aug 20 14:50:52.63: [24398]: --> [2:OK]
Aug 20 14:50:52.63: [24398]: REMOTE best rate 14400 bit/s
Aug 20 14:50:52.63: [24398]: REMOTE max page width 1728 pixels in 215 mm
Aug 20 14:50:52.63: [24398]: REMOTE max unlimited page length
Aug 20 14:50:52.63: [24398]: REMOTE best vres 7.7 line/mm
Aug 20 14:50:52.63: [24398]: REMOTE best format 2-D MR
Aug 20 14:50:52.63: [24398]: REMOTE supports T.30 Annex A, ECM
Aug 20 14:50:52.63: [24398]: REMOTE best 10 ms/scanline
Aug 20 14:50:52.63: [24398]: USE 14400 bit/s
Aug 20 14:50:52.63: [24398]: USE 10 ms/scanline
Aug 20 14:50:52.63: [24398]: SEND file "docq/doc461.ps;01"
Aug 20 14:50:52.63: [24398]: Modem does not support document page width, max page width 2432 pixels, image width 1653 pixels
---
Doese anyone have an idea what is wrong?


Here is the log of successfull trasnmission using "Letter" page
format to the same number:
----
SE 0 ms/scanline
Aug 20 14:42:24.11: [23330]: SEND file "docq/doc457.ps;01"
Aug 20 14:42:24.11: [23330]: USE page width 1728 pixels in 215 mm
Aug 20 14:42:24.11: [23330]: USE unlimited page length
Aug 20 14:42:24.11: [23330]: USE 7.7 line/mm
Aug 20 14:42:24.12: [23330]: USE 1-D MR
Aug 20 14:42:24.12: [23330]: <-- [23:AT+FIS=1,5,0,2,0,0,0,0\r]
Aug 20 14:42:24.31: [23330]: --> [2:OK]
Aug 20 14:42:24.31: [23330]: <-- [7:AT+FDT\r]
Aug 20 14:42:31.30: [23330]: --> [20:+FCS:1,5,0,2,0,0,0,0]
Aug 20 14:42:31.80: [23330]: --> [7:CONNECT]
Aug 20 14:42:31.80: [23330]: SEND begin page
Aug 20 14:42:31.80: [23330]: <-- data [1031]
Aug 20 14:42:31.80: [23330]: <-- data [1031]
Aug 20 14:42:31.80: [23330]: <-- data [1042]
Aug 20 14:42:31.80: [23330]: <-- data [1027]
Aug 20 14:42:31.80: [23330]: <-- data [1032]
Aug 20 14:42:31.91: [23330]: <-- data [1026]
Aug 20 14:42:31.97: [23330]: <-- data [1029]
Aug 20 14:42:32.02: [23330]: <-- data [1027]
Aug 20 14:42:32.09: [23330]: <-- data [1026]
Aug 20 14:42:32.15: [23330]: <-- data [206]
Aug 20 14:42:32.20: [23330]: SENT 9420 bytes of data
Aug 20 14:42:32.20: [23330]: SEND 1D RTC
Aug 20 14:42:32.20: [23330]: <-- data [9]
Aug 20 14:42:32.26: [23330]: SEND end page
Aug 20 14:42:32.26: [23330]: SEND send EOP (no more pages or documents)
Aug 20 14:42:32.26: [23330]: <-- data [2]
Aug 20 14:42:41.70: [23330]: --> [7:+FHS:00]
Aug 20 14:42:41.70: [23330]: REMOTE HANGUP: Normal and proper end of connection (code 0)
Aug 20 14:42:41.70: [23330]: SEND recv MCF (message confirmation)
Aug 20 14:42:41.70: [23330]: SEND FAX (00000518): FROM 02219354477@herb TO 02219354477 (page 1 of 1 sent in 0:17)
Aug 20 14:42:41.70: [23330]: SEND FAX (00000518): FROM 02219354477@herb TO 02219354477 (docq/doc457.ps;01 sent in 0:17)
Aug 20 14:42:41.72: [23330]: <-- [5:ATH0\r]
Aug 20 14:42:41.72: [23330]: --> [2:OK]
Aug 20 14:42:41.72: [23330]: SESSION END
----
  

-- 
Best regards,
 Andrei                          mailto:svirida@debitel.net




____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null