Re: [hylafax-users] help to initialize multitech 56k modem

["Michel Donais" <donais@gsig-net.qc.ca>]

> > Operating System:     Sco Openserver 5.04
> > Modem :                   Multitech MT5600ZDXV

> Change At&K3&D0&C1 to AT&K3&D0&C1 in your config. But this is a sign that
> Hylafax is not fool-proof enough (it always expects config commands in the
> upper case). Also all init commands possibly should be issued
> separately...
>
Well you were right; I stick on that problem for the begining of the day and
was too woory to look anywhere except in front of my glass. Last week
I made the same mistake on /etc/inittab.

Your solution gave me two more good lines; but I'm still locked.

Here's  the last listing,

Michel



Sep 24 18:53:58 donsoft FaxGetty[715]: MODEM flush i/o
Sep 24 18:53:58 donsoft FaxGetty[715]: <-- [16:ATZE0V1Q0S0=0H0\r]
Sep 24 18:53:58 donsoft FaxGetty[715]: --> [15:ATZE0V1Q0S0=0H0]
Sep 24 18:53:58 donsoft FaxGetty[715]: --> [2:OK]
Sep 24 18:53:58 donsoft FaxGetty[715]: <-- [21:ATS8=2S7=50&K3&D2&C1\r]
Sep 24 18:53:58 donsoft FaxGetty[715]: --> [20:ATS8=2S7=50&K3&D2&C1]
Sep 24 18:53:58 donsoft FaxGetty[715]: --> [2:OK]
Sep 24 18:53:58 donsoft FaxGetty[715]: <-- [12:AT+FCLASS=?\r]
Sep 24 18:53:58 donsoft FaxGetty[715]: --> [11:AT+FCLASS=?]
Sep 24 18:53:58 donsoft FaxGetty[715]: --> [7:0,1,1.0]
Sep 24 18:53:58 donsoft FaxGetty[715]: --> [2:OK]
Sep 24 18:53:58 donsoft FaxGetty[715]: MODEM set DTR OFF

May be here why?
Sep 24 18:53:58 donsoft FaxGetty[715]: MODEM set baud rate: 0 baud (flow
control unchanged)

Sep 24 18:53:59 donsoft FaxGetty[715]: Unable to setup modem on /dev/tty1A;
giving up after 2 attempts
Sep 24 18:53:59 donsoft FaxQueuer[290]: MODEM /dev/tty1A appears to be
wedged
Sep 24 18:53:59 donsoft FaxQueuer[290]: MODEM /dev/tty1A appears to be
wedged
Sep 24 18:53:59 donsoft FaxGetty[715]: CLOSE /dev/tty1A
Sep 24 18:53:59 donsoft FaxGetty[725]: OPEN /dev/tty1A
Sep 24 18:53:59 donsoft FaxGetty[725]: MODEM set DTR OFF
Sep 24 18:53:59 donsoft FaxGetty[725]: MODEM set baud rate: 0 baud (flow
control unchanged)
Sep 24 18:53:59 donsoft FaxGetty[725]: DELAY 2600 ms
Sep 24 18:53:59 donsoft FaxQueuer[290]: Bad exit status 041400 for
"bin/wedged "tty1A" "/dev/tty1A""
Sep 24 18:53:59 donsoft FaxQueuer[290]: Bad exit status 041400 for
"bin/wedged "tty1A" "/dev/tty1A""
Sep 24 18:54:02 donsoft FaxGetty[725]: MODEM set DTR ON
Sep 24 18:54:02 donsoft FaxGetty[725]: MODEM set baud rate: 38400 baud,
input flow RTS/CTS, output flow RTS/CTS
Sep 24 18:54:02 donsoft FaxGetty[725]: MODEM flush i/o
Sep 24 18:54:02 donsoft FaxGetty[725]: <-- [16:ATZE0V1Q0S0=0H0\r]






____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null