|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: COMREC error
On Tue, May 23, 2000 at 08:41:41AM +0400, Dmitry Bely wrote:
> Looks like the problem with the flow control (if it's persistent). Increase
> traicing level (to enable flow control reporting), and repost the log
> again. The following info is also needed:
> - model of the modem
> - your config.<modem>
> - modem init log from /var/log/daemon.log
All info files are attached... Please!, look and help... :-)
--
Saludos: [ FidoNet 4-ever !]
Antonio Pérez [ http://www.poboxes.com/aperez ]
e-mail: aperez@poboxes.com [ GPG Key ID: 2048g/2BDA19C4 ]
May 25 17:31:39 servidor FaxGetty[30831]: OPEN /dev/ttyS0
May 25 17:31:46 servidor FaxGetty[30831]: MODEM MULTI-TECH SYSTEMS MT2834ZDXI/0316A
May 25 17:34:01 servidor FaxGetty[30831]: ANSWER: FAX CONNECTION
May 25 17:34:23 servidor FaxGetty[30831]: RECV FAX (00000035): recvq/fax00008.tif from 959XXXXXX, route to <unspecified>, 0 pages in 0:22
May 25 17:34:23 servidor FaxGetty[30831]: RECV FAX (00000035): session with 959XXXXXX terminated abnormally: COMREC error
May 25 17:34:23 servidor FaxGetty[30831]: RECV FAX: bin/faxrcvd "recvq/fax00008.tif" "ttyS0" "00000035" "COMREC error"
May 25 17:34:32 servidor FaxGetty[30831]: MODEM MULTI-TECH SYSTEMS MT2834ZDXI/0316A
# $Id: mt-1432,v 1.1.1.1 1998/10/12 20:47:47 root Exp $
#
# HylaFAX Facsimile Software
#
# Copyright (c) 1990-1996 Sam Leffler
# Copyright (c) 1991-1996 Silicon Graphics, Inc.
# HylaFAX is a trademark of Silicon Graphics, Inc.
#
# Permission to use, copy, modify, distribute, and sell this software and
# its documentation for any purpose is hereby granted without fee, provided
# that (i) the above copyright notices and this permission notice appear in
# all copies of the software and related documentation, and (ii) the names of
# Sam Leffler and Silicon Graphics may not be used in any advertising or
# publicity relating to the software without the specific, prior written
# permission of Sam Leffler and Silicon Graphics.
#
# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND,
# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY
# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
#
# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF
# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
# OF THIS SOFTWARE.
#
#
# Configuration for a Multi-Tech MT1432, MT224BA, and MT1932ZDX modems.
#
# MT1432 firmware rev 0307 I or newer
# MT132BG rev 0109A
# MT1932ZDX rev 0109H
#
# Note that MT1432 modems come in several varieties:
#
# MT1432BA uses Rockwell data pump
# MT1432BA/A uses AT&T data pump
# MT1432BG MT1432BA tweaked for German FCC
# MT1432MK (for UK?)
#
# The modem has been tried with both XON/XOFF and RTS/CTS flow
# control; this configuration is for hardware flow control.
#
#
CountryCode: 34
AreaCode: 959
FAXNumber: "+34 959XXXXXX"
LongDistancePrefix: 1
InternationalPrefix: 00
DialStringRules: etc/dialrules
ServerTracing: 1
SessionTracing: 262143
RecvFileMode: 0600
LogFileMode: 0600
DeviceMode: 0600
RingsBeforeAnswer: 1
SpeakerVolume: off
GettyArgs: "-h %l dx_%s"
LocalIdentifier: "+34 959XXXXXX"
TagLineFont: etc/lutRS18.pcf
TagLineFormat: "De %%l|%c|Pagina %%p de %%t"
MaxRecvPages: 25
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType: Class2 # use class 2 interface
ModemRate: 38400 # lock rate for DCE-DTE communication
ModemFlowControl: rtscts # default
#
ModemHardFlowCmd: AT&E4 # hardware flow control
ModemSoftFlowCmd: AT&E5 # software flow control
ModemSetupDTRCmd: AT&D3 # setup so DTR drop resets modem
ModemSetupDCDCmd: AT&C1 # setup so DCD reflects carrier (or not)
ModemSetupAACmd: AT+FAA=1 # enable adaptive-answer in class 2
#
# NB: some models get confused by the @
#
ModemDialCmd: ATDT%s@ # T for tone dialing, @ for silence
#
Class2RecvDataTrigger: "\022" # character sent to modem to start recv
May 25 17:33:54.05: [30831]: SESSION BEGIN 00000035 XXXXXXXXXXX
May 25 17:33:54.05: [30831]: <-- [4:ATA\r]
May 25 17:34:00.62: [30831]: --> [74:+FHT:FF 03 40 36 32 38 30 34 35 39 35 39 20 34 33 2B 2B 20 20 20 20 20 20 ]
May 25 17:34:01.41: [30831]: --> [26:+FHT:FF 13 80 00 EE FA 02 ]
May 25 17:34:01.89: [30831]: --> [5:+FCON]
May 25 17:34:01.89: [30831]: ANSWER: FAX CONNECTION
May 25 17:34:01.89: [30831]: STATE CHANGE: ANSWERING -> RECEIVING
May 25 17:34:01.89: [30831]: MODEM input buffering enabled
May 25 17:34:01.89: [30831]: RECV FAX: begin
May 25 17:34:03.65: [30831]: --> [74:+FHR:FF 03 43 31 33 35 30 34 35 39 35 39 20 20 20 20 20 20 20 20 20 20 20 ]
May 25 17:34:03.91: [30831]: --> [26:+FHR:FF 13 83 00 A2 98 00 ]
May 25 17:34:07.15: [30831]: --> [28:+FTSI:" XXXXXXXXX"]
May 25 17:34:07.15: [30831]: REMOTE TSI "XXXXXXXXX"
May 25 17:34:07.15: [30831]: --> [21:+FDCS:0,5,0,2,1,0,0,1]
May 25 17:34:07.15: [30831]: REMOTE wants 14400 bit/s
May 25 17:34:07.15: [30831]: REMOTE wants page width 1728 pixels in 215 mm
May 25 17:34:07.15: [30831]: REMOTE wants unlimited page length
May 25 17:34:07.15: [30831]: REMOTE wants 3.85 line/mm
May 25 17:34:07.15: [30831]: REMOTE wants 2-D MR
May 25 17:34:07.15: [30831]: --> [2:OK]
May 25 17:34:07.15: [30831]: <-- [7:AT+FDR\r]
May 25 17:34:08.31: [30831]: --> [14:+FHT:FF 13 84 ]
May 25 17:34:08.61: [30831]: --> [5:+FCFR]
May 25 17:34:08.61: [30831]: --> [28:+FTSI:" XXXXXXXXX"]
May 25 17:34:08.61: [30831]: REMOTE TSI "XXXXXXXXX"
May 25 17:34:08.61: [30831]: --> [21:+FDCS:0,5,0,2,1,0,0,1]
May 25 17:34:08.61: [30831]: REMOTE wants 14400 bit/s
May 25 17:34:08.61: [30831]: REMOTE wants page width 1728 pixels in 215 mm
May 25 17:34:08.61: [30831]: REMOTE wants unlimited page length
May 25 17:34:08.61: [30831]: REMOTE wants 3.85 line/mm
May 25 17:34:08.61: [30831]: REMOTE wants 2-D MR
May 25 17:34:09.09: [30831]: --> [7:CONNECT]
May 25 17:34:09.09: [30831]: RECV: begin page
May 25 17:34:09.09: [30831]: RECV: send trigger 022
May 25 17:34:09.09: [30831]: <-- data [1]
May 25 17:34:09.55: [30831]: RECV/CQ: Bad 2D pixel count, row 0, got 0, expected 1728
May 25 17:34:19.66: [30831]: RECV/CQ: Bad 1D pixel count, row 1128, got 0, expected 1728
May 25 17:34:19.66: [30831]: RECV/CQ: Bad 1D pixel count, row 1129, got 0, expected 1728
May 25 17:34:19.66: [30831]: RECV/CQ: Bad 1D pixel count, row 1130, got 0, expected 1728
May 25 17:34:19.66: [30831]: RECV/CQ: Bad 1D pixel count, row 1131, got 0, expected 1728
May 25 17:34:19.66: [30831]: RECV/CQ: Bad 1D pixel count, row 1132, got 0, expected 1728
May 25 17:34:19.66: [30831]: RECV/CQ: Bad 1D pixel count, row 1133, got 30, expected 1728
May 25 17:34:19.66: [30831]: RECV: 18277 bytes of data, 1134 total lines
May 25 17:34:19.77: [30831]: --> [15:+FPTS:2,0,0,0,0]
May 25 17:34:21.05: [30831]: --> [14:+FHR:FF 13 2F ]
May 25 17:34:21.05: [30831]: --> [6:+FET:2]
May 25 17:34:21.05: [30831]: RECV recv EOP (no more pages or documents)
May 25 17:34:21.05: [30831]: --> [2:OK]
May 25 17:34:21.05: [30831]: RECV send RTN (retrain negative)
May 25 17:34:21.05: [30831]: <-- [7:AT+FDR\r]
May 25 17:34:22.23: [30831]: --> [14:+FHT:FF 13 4C ]
May 25 17:34:23.81: [30831]: --> [14:+FHR:FF 13 FB ]
May 25 17:34:23.81: [30831]: --> [8:+FHNG:72]
May 25 17:34:23.81: [30831]: REMOTE HANGUP: COMREC error (code 72)
May 25 17:34:23.81: [30831]: RECV FAX (00000035): recvq/fax00008.tif from XXXXXXXXX, route to <unspecified>, 0 pages in 0:22
May 25 17:34:23.81: [30831]: RECV FAX: COMREC error
May 25 17:34:23.82: [30831]: RECV FAX (00000035): session with XXXXXXXXX terminated abnormally: COMREC error
May 25 17:34:23.82: [30831]: RECV FAX: bin/faxrcvd "recvq/fax00008.tif" "ttyS0" "00000035" "COMREC error"
May 25 17:34:25.39: [30831]: RECV FAX: end
May 25 17:34:25.40: [30831]: SESSION END
