flexfax: COMREC error

[Antonio Perez <sknews@teleline.es>]

Hi!:

  I'm running hylafax-4.1beta1-1rh6.i386.rpm with RTN patch applied.

  Well, without RTN patch I can't send any fax to a RICOH fax machine, with
it, I got it... But I can't receive any faxes... I get 'COMREC error'.

  Follow you can see the log...

  Please!, this is urgent!!!... I need that it work tomorrow.

  Thank you very much in advance.

> ---------------------------------------------------------------------

De: The HylaFAX Receive Agent <fax@xxxxx.xxxxx.xx>
Para: <FaxMaster@xxxxx.xxxxx.xx>
Asunto: facsimile not received
Fecha: lunes, 22 de mayo de 2000 19:52

An attempt to receive facsimile on ttyS0 failed because:

    COMREC error

    ---- Transcript of session follows ----

May 22 19:51:51.48: [  515]: SESSION BEGIN 00000031 34959540826
May 22 19:51:51.48: [  515]: <-- [4:ATA\r]
May 22 19:51:59.80: [  515]: --> [5:+FCON]
May 22 19:51:59.80: [  515]: ANSWER: FAX CONNECTION
May 22 19:51:59.80: [  515]: RECV FAX: begin
May 22 19:52:03.72: [  515]: --> [28:+FTSI:"           XXXXXXXXX"]
May 22 19:52:03.72: [  515]: REMOTE TSI "XXXXXXXXX"
May 22 19:52:03.72: [  515]: --> [21:+FDCS:0,3,0,2,1,0,0,3]
May 22 19:52:03.72: [  515]: REMOTE wants 9600 bit/s
May 22 19:52:03.72: [  515]: REMOTE wants page width 1728 pixels in 215 mm
May 22 19:52:03.72: [  515]: REMOTE wants unlimited page length
May 22 19:52:03.72: [  515]: REMOTE wants 3.85 line/mm
May 22 19:52:03.72: [  515]: REMOTE wants 2-D MR
May 22 19:52:03.72: [  515]: --> [2:OK]
May 22 19:52:03.72: [  515]: <-- [7:AT+FDR\r]
May 22 19:52:05.18: [  515]: --> [5:+FCFR]
May 22 19:52:05.18: [  515]: --> [28:+FTSI:"           XXXXXXXXX"]
May 22 19:52:05.18: [  515]: REMOTE TSI "XXXXXXXXX"
May 22 19:52:05.18: [  515]: --> [21:+FDCS:0,3,0,2,1,0,0,3]
May 22 19:52:05.18: [  515]: REMOTE wants 9600 bit/s
May 22 19:52:05.18: [  515]: REMOTE wants page width 1728 pixels in 215 mm
May 22 19:52:05.18: [  515]: REMOTE wants unlimited page length
May 22 19:52:05.18: [  515]: REMOTE wants 3.85 line/mm
May 22 19:52:05.18: [  515]: REMOTE wants 2-D MR
May 22 19:52:05.71: [  515]: --> [7:CONNECT]
May 22 19:52:05.71: [  515]: RECV: begin page
May 22 19:52:05.71: [  515]: RECV: send trigger 022
May 22 19:52:20.15: [  515]: RECV: 17074 bytes of data, 1133 total lines
May 22 19:52:20.15: [  515]: --> [15:+FPTS:2,0,0,0,0]
May 22 19:52:21.43: [  515]: --> [6:+FET:2]
May 22 19:52:21.43: [  515]: RECV recv EOP (no more pages or documents)
May 22 19:52:21.43: [  515]: --> [2:OK]
May 22 19:52:21.43: [  515]: RECV send RTN (retrain negative)
May 22 19:52:21.43: [  515]: <-- [7:AT+FDR\r]
May 22 19:52:24.31: [  515]: --> [8:+FHNG:72]
May 22 19:52:24.31: [  515]: REMOTE HANGUP: COMREC error (code 72)
May 22 19:52:24.31: [  515]: RECV FAX (00000031): recvq/fax00006.tif from XXXXXXXXX, route to <unspecified>, 0 pages in 0:25
May 22 19:52:24.31: [  515]: RECV FAX: COMREC error
May 22 19:52:24.31: [  515]: RECV FAX (00000031): session with XXXXXXXXX terminated abnormally: COMREC error
May 22 19:52:24.32: [  515]: RECV FAX: bin/faxrcvd "recvq/fax00006.tif" "ttyS0" "00000031" "COMREC error"

> ---------------------------------------------------------------------------

-- 
  Saludos:                    [ FidoNet 4-ever !]
  Antonio Pérez               [ http://www.poboxes.com/aperez ]
  e-mail: aperez@poboxes.com  [ GPG Key ID: 2048g/2BDA19C4 ]