|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: Hylafax on PowerMacs
fonts
styles
Robert,
Here's some more information ....
The send session that results in a blank fax being received generates the following log:
Oct 31 21:32:14.60: [ 2177]: SESSION BEGIN 00000051 440140301403271287
Oct 31 21:32:14.60: [ 2177]: SEND FAX: JOB ^ó°^ó°^ó¸^ó¸^óÀ^óÀ^óÈ^óÈŒ/ Œ-ðŒ/xŒ/x^óà^óà^óè^óè^óð^óð^óø^óø^ô DEST (null) COMMID ^ó°^ó°^ó¸^ó¸^óÀ^óÀ^óÈ^óÈŒ/ Œ-ðŒ/xŒ/x^óà^óà^óè^óè^óð^óð^óø^óø^ô
Oct 31 21:32:14.60: [ 2177]: DELAY 2600 ms
Oct 31 21:32:17.20: [ 2177]: <-- [15:ATE0V1Q0S0=0H0\r]
Oct 31 21:32:17.35: [ 2177]: --> [2:OK]
Oct 31 21:32:17.35: [ 2177]: <-- [13:ATS8=2S7=120\r]
Oct 31 21:32:17.50: [ 2177]: --> [2:OK]
Oct 31 21:32:17.50: [ 2177]: <-- [14:AT+FCLASS=2.0\r]
Oct 31 21:32:17.65: [ 2177]: --> [2:OK]
Oct 31 21:32:17.65: [ 2177]: <-- [9:AT+FLO=1\r]
Oct 31 21:32:17.80: [ 2177]: --> [2:OK]
Oct 31 21:32:17.80: [ 2177]: <-- [9:AT+FPP=0\r]
Oct 31 21:32:17.95: [ 2177]: --> [2:OK]
Oct 31 21:32:17.95: [ 2177]: <-- [9:AT+FBO=0\r]
Oct 31 21:32:18.10: [ 2177]: --> [2:OK]
Oct 31 21:32:18.10: [ 2177]: <-- [10:AT+FCT=30\r]
Oct 31 21:32:18.25: [ 2177]: --> [2:OK]
Oct 31 21:32:18.25: [ 2177]: <-- [15:AT+FNR=1,1,1,0\r]
Oct 31 21:32:18.40: [ 2177]: --> [2:OK]
Oct 31 21:32:18.40: [ 2177]: <-- [9:AT+FIE=0\r]
Oct 31 21:32:18.55: [ 2177]: --> [2:OK]
Oct 31 21:32:18.55: [ 2177]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Oct 31 21:32:18.71: [ 2177]: --> [2:OK]
Oct 31 21:32:18.71: [ 2177]: <-- [5:ATM0\r]
Oct 31 21:32:18.85: [ 2177]: --> [2:OK]
Oct 31 21:32:18.85: [ 2177]: <-- [14:AT+FCLASS=2.0\r]
Oct 31 21:32:19.10: [ 2177]: --> [2:OK]
Oct 31 21:32:19.10: [ 2177]: <-- [9:AT+FLO=1\r]
Oct 31 21:32:19.35: [ 2177]: --> [2:OK]
Oct 31 21:32:19.35: [ 2177]: <-- [9:AT+FPP=0\r]
Oct 31 21:32:19.60: [ 2177]: --> [2:OK]
Oct 31 21:32:19.60: [ 2177]: <-- [9:AT+FBO=0\r]
Oct 31 21:32:19.85: [ 2177]: --> [2:OK]
Oct 31 21:32:19.85: [ 2177]: <-- [10:AT+FCT=30\r]
Oct 31 21:32:20.10: [ 2177]: --> [2:OK]
Oct 31 21:32:20.10: [ 2177]: <-- [15:AT+FNR=1,1,1,0\r]
Oct 31 21:32:20.35: [ 2177]: --> [2:OK]
Oct 31 21:32:20.35: [ 2177]: <-- [9:AT+FIE=0\r]
Oct 31 21:32:20.60: [ 2177]: --> [2:OK]
Oct 31 21:32:20.60: [ 2177]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Oct 31 21:32:20.86: [ 2177]: --> [2:OK]
Oct 31 21:32:20.86: [ 2177]: <-- [29:AT+FLI="Iain's Linux server"\r]
Oct 31 21:32:21.13: [ 2177]: --> [2:OK]
Oct 31 21:32:21.13: [ 2177]: DIAL 01403271287
Oct 31 21:32:21.13: [ 2177]: <-- [16:ATDT01403271287\r]
Oct 31 21:32:35.35: [ 2177]: --> [4:+FCO]
Oct 31 21:32:37.53: [ 2177]: --> [27:+FCI:" i"]
Oct 31 21:32:37.53: [ 2177]: REMOTE CSI "i"
Oct 31 21:32:37.53: [ 2177]: --> [20:+FIS:1,5,0,2,0,0,0,0]
Oct 31 21:32:37.53: [ 2177]: --> [2:OK]
Oct 31 21:32:37.53: [ 2177]: REMOTE best rate 14400 bit/s
Oct 31 21:32:37.53: [ 2177]: REMOTE max page width 1728 pixels in 215 mm
Oct 31 21:32:37.53: [ 2177]: REMOTE max unlimited page length
Oct 31 21:32:37.53: [ 2177]: REMOTE best vres 7.7 line/mm
Oct 31 21:32:37.53: [ 2177]: REMOTE best format 1-D MR
Oct 31 21:32:37.53: [ 2177]: REMOTE best 0 ms/scanline
Oct 31 21:32:37.53: [ 2177]: USE 14400 bit/s
Oct 31 21:32:37.53: [ 2177]: USE 0 ms/scanline
Oct 31 21:32:37.53: [ 2177]: SEND file "docq/doc22.cover;01"
Oct 31 21:32:37.53: [ 2177]: USE page width 1728 pixels in 215 mm
Oct 31 21:32:37.53: [ 2177]: USE unlimited page length
Oct 31 21:32:37.53: [ 2177]: USE 7.7 line/mm
Oct 31 21:32:37.53: [ 2177]: USE 1-D MR
Oct 31 21:32:37.53: [ 2177]: <-- [23:AT+FIS=1,5,0,2,0,0,0,0\r]
Oct 31 21:32:37.80: [ 2177]: --> [2:OK]
Oct 31 21:32:37.80: [ 2177]: <-- [7:AT+FDT\r]
Oct 31 21:32:38.10: [ 2177]: --> [20:+FCS:1,5,0,2,0,0,0,0]
Oct 31 21:32:44.71: [ 2177]: --> [7:CONNECT]
Oct 31 21:32:44.71: [ 2177]: SEND begin page
Oct 31 21:32:44.71: [ 2177]: <-- data [1027]
Oct 31 21:32:44.71: [ 2177]: <-- data [1027]
Oct 31 21:32:44.71: [ 2177]: <-- data [1038]
Oct 31 21:32:44.71: [ 2177]: <-- data [1031]
Oct 31 21:32:48.73: [ 2177]: <-- data [1029]
Oct 31 21:32:48.73: [ 2177]: <-- data [1024]
Oct 31 21:32:48.73: [ 2177]: <-- data [1027]
Oct 31 21:32:48.73: [ 2177]: <-- data [1045]
Oct 31 21:32:52.74: [ 2177]: <-- data [1035]
Oct 31 21:32:52.74: [ 2177]: <-- data [1065]
Oct 31 21:32:52.74: [ 2177]: <-- data [1048]
Oct 31 21:32:52.74: [ 2177]: <-- data [1040]
Oct 31 21:32:56.76: [ 2177]: <-- data [1039]
Oct 31 21:32:56.76: [ 2177]: <-- data [1043]
Oct 31 21:32:56.76: [ 2177]: <-- data [1061]
Oct 31 21:32:56.76: [ 2177]: <-- data [1045]
Oct 31 21:33:00.78: [ 2177]: <-- data [1054]
Oct 31 21:33:00.78: [ 2177]: <-- data [1054]
Oct 31 21:33:00.78: [ 2177]: <-- data [1037]
Oct 31 21:33:04.79: [ 2177]: <-- data [1045]
Oct 31 21:33:04.79: [ 2177]: <-- data [1051]
Oct 31 21:33:04.80: [ 2177]: <-- data [1033]
Oct 31 21:33:04.80: [ 2177]: <-- data [1028]
Oct 31 21:33:08.81: [ 2177]: <-- data [1024]
Oct 31 21:33:08.81: [ 2177]: <-- data [997]
Oct 31 21:33:08.81: [ 2177]: SENT 25573 bytes of data
Oct 31 21:33:08.81: [ 2177]: SEND 1D RTC
Oct 31 21:33:08.81: [ 2177]: <-- data [9]
Oct 31 21:33:11.86: [ 2177]: SEND end page
Oct 31 21:33:11.86: [ 2177]: SEND send MPS (more pages, same document)
Oct 31 21:33:11.86: [ 2177]: <-- data [2]
Oct 31 21:33:14.63: [ 2177]: --> [2:OK]
Oct 31 21:33:14.63: [ 2177]: SEND recv MCF (message confirmation)
Oct 31 21:33:14.63: [ 2177]: SEND FAX (00000051): FROM root@Wallace TO 01403271287 (page 1 of 2 sent in 0:37)
Oct 31 21:33:14.63: [ 2177]: SEND FAX (00000051): FROM root@Wallace TO 01403271287 (docq/doc22.cover;01 sent in 0:37)
Oct 31 21:33:14.63: [ 2177]: SEND file "docq/doc5.ps;01"
Oct 31 21:33:14.63: [ 2177]: USE page width 1728 pixels in 215 mm
Oct 31 21:33:14.63: [ 2177]: USE unlimited page length
Oct 31 21:33:14.63: [ 2177]: USE 7.7 line/mm
Oct 31 21:33:14.63: [ 2177]: USE 1-D MR
Oct 31 21:33:14.63: [ 2177]: <-- [7:AT+FDT\r]
Oct 31 21:33:15.00: [ 2177]: --> [7:CONNECT]
Oct 31 21:33:15.00: [ 2177]: SEND begin page
Oct 31 21:33:15.00: [ 2177]: <-- data [1026]
Oct 31 21:33:15.00: [ 2177]: <-- data [1026]
Oct 31 21:33:15.00: [ 2177]: <-- data [338]
Oct 31 21:33:15.00: [ 2177]: SENT 2385 bytes of data
Oct 31 21:33:15.00: [ 2177]: SEND 1D RTC
Oct 31 21:33:15.00: [ 2177]: <-- data [9]
Oct 31 21:33:17.52: [ 2177]: SEND end page
Oct 31 21:33:17.52: [ 2177]: SEND send EOP (no more pages or documents)
Oct 31 21:33:17.52: [ 2177]: <-- data [2]
Oct 31 21:33:21.68: [ 2177]: --> [7:+FHS:00]
Oct 31 21:33:21.68: [ 2177]: REMOTE HANGUP: Normal and proper end of connection (code 0)
Oct 31 21:33:21.68: [ 2177]: SEND recv MCF (message confirmation)
Oct 31 21:33:21.68: [ 2177]: SEND FAX (00000051): FROM root@Wallace TO 01403271287 (page 2 of 2 sent in 0:07)
Oct 31 21:33:21.68: [ 2177]: SEND FAX (00000051): FROM root@Wallace TO 01403271287 (docq/doc5.ps;01 sent in 0:07)
Oct 31 21:33:21.68: [ 2177]: <-- [5:ATH0\r]
Oct 31 21:33:21.81: [ 2177]: --> [2:OK]
Oct 31 21:33:21.81: [ 2177]: SESSION END
The "gobbledygook" generated by a faxstat -v is:
Trying localhost (127.0.0.1) at port 4559...
Connected to localhost.
220 Wallace server (HylaFAX (tm) Version 4.1beta2) ready.
-> USER root
230 User ^ó°^ó°^ó¸^ó¸^óÀ^óÀ^óÈ^óÈ^óÐ^óÐ^óØ^óØ^óà^óà^óè^óè^óð^óð^óø^óø^ô logged in.
-> PORT 127,0,0,1,5,94
200 PORT command successful.
-> LIST status
425 Cannot build data connection: Network is unreachable.
Unfortunately, I made some changes to the hylafax setup last night and one of these seems to have stopped the segmentation error I got with faxgetty. Incidentally, how would I go about building a version of faxgetty with debug code included? I may need this if I strike problems again.
However, received faxes seem to be left in the /var/spool/fax/recvq folder - not forwarded anywhere. If you examine a '.tif' file in that folder, the document is received but lines seem to be squashed up - any thoughts?
Iain
On Sun, Oct 31, 1999, 4:14:44 am GMT Robert Colquhoun wrote:
>At 12:07 AM 10/31/99 -0400, Iain Stevenson wrote:
>
>>Has anyone got experience of running Hylafax on LinuxPPC on a
>PowerMac? I
>>have compiled and installed the latest beta and have the following
>problems
>>(note - I have one of the "infamous" USR 56K Voice FaxModems):
>>
>>- it is variable in sending performance - works to a fax machine, sends
>blank
>>faxes to a PC
>
>Could you try an produce a session log - the problems to hard to diagnose
>otherwise.
>
>>- faxgetty fails with a segmentation fault at the end of a receive session
>
>This is not good - could you run gdb against the core file, even just to
>find the location of the fault(type 'where' at the gdb prompt).
>
>>- faxstat -v returns gobbledygook about not being able to set up a
>network
>>connection (I enter the command at the server - my only Linux machine).
>
>Double check the obvious stuff ie all the daemons are running, and cut and
>paste the failure message faxstat produces.
>
>- Robert
>
>
