|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: EOP problem solution?!?
>
> 1. try EOP_Hylafax
> 2. if EOP.failure then retry 2 times
> 3. if still EOP.failure then try EOP_efax
> 4. if still EOP.failure then message(really lousy faxmachine)
Firstly, one of the reasons for EOP failures is failing to configure the
flow control properly, which would not be fixed by this procedure.
I think it is also possible that this procedure collapses to.
1. try EOP_Hylafax
2. if EOP.failure then retry 2 times
3. if still EOP.failure then try pretend it worked anyway.
