|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: View incoming faxes on Windows 95
Dear
I had tried Wang/Eastman Kodak Imaging before receive the mail. But still
can't complete view image. Do I modify some config?
Regard,
Percy Yen
> ----- Original Message -----
> From: Holger Raschke <Holger.Raschke@FernUni-Hagen.de>
> To: Percy Yen <pyen@asiansources.com>
> Cc: flexfax <flexfax@sgi.com>
> Sent: Tuesday, August 10, 1999 3:23 AM
> Subject: Re: flexfax: View incoming faxes on Windows 95
>
>
> > Hi Percy,
> > supposing that you use Windows as client:
> > Wang/Eastman Kodak Imaging, bundled with most Win95/NT, works quite
> > well. You can download it freely from the microsoft web page.
> > This question was answered a few weeks ago. Watch mailing list archives
> > for further detail.
> > Hope this helps.
> > Holger
> >
> > Percy Yen wrote:
> > >
> > > Dear
> > >
> > > Dear
> > >
> > > Hylafax-4.0pl2-3rh5 under RH 5.2.
> > >
> > > I fax a sample fax to Hylafax server and it seems OK no any problem.
but
> I
> > > use Tiffveew or Irfax view to see the incomeing faxs, it can't show
all
> page
> > > just only 5-6 line. could you tell me how to fix?
> > >
> > > Below is modem config file and receive states.
> > > ##moden config
> > > CountryCode: 886
> > > AreaCode: 2
> > > FAXNumber: "002 886 2 27174731"
> > > LongDistancePrefix: 0
> > > InternationalPrefix: 002
> > > DialStringRules: etc/dialrules
> > > ServerTracing: 1
> > > SessionTracing: 11
> > > RecvFileMode: 0666
> > > LogFileMode: 0600
> > > DeviceMode: 0600
> > > RingsBeforeAnswer: 2
> > > SpeakerVolume: on
> > > GettyArgs: "-h %1 dx_%s"
> > > LocalIdentifier: "Asian Sources"
> > > LogFacility: local5
> > > ClocalAsRoot: yes
> > > TagLineFont: etc/lutRS18.pcf
> > > TagLineFormat: "From: %%1|%%c|Page %%p of %%t"
> > > MaxRecvPages: 25
> > > #
> > > #
> > > # Modem-related stuff: should reflect modem command interface
> > > #
> > > #
> > > # Modem-related stuff: should reflect modem command interface
> > > # and hardware connection/cabling (e.g. flow control).
> > > #
> > > ModemType: Class2 # use class 2 interface
> > > ModemRate: 38400
> > > ModemFlowControl: rtscts # default
> > > #
> > > #ModemResetCmds: AT&F2 # what you want for a Supra
> > > ModemNoFlowCmd: AT&K # disable flow control cmd
> > > ModemHardFlowCmd: AT&K3 # hardware flow control cmd
> > > ModemSoftFlowCmd: AT&K4 # software flow control cmd
> > > ModemSetupDTRCmd: AT&D3 # DTR off causes modem to
reset
> > > #ModemSetupDTRCmd: AT&D2S25=1S38=0 # Dynalink 1414VE needs this
> > > ModemSetupDCDCmd: AT&C1 # DCD follows carrier
> > > ModemSetupAACmd: AT+FAA=1+FCLASS=0 # enable in current class
> > > #
> > > ModemSendFillOrder: LSB2MSB # as expected
> > > ModemRecvFillOrder: MSB2LSB # opposite of what makes sense
> > > #
> > > #ModemAnswerFaxBeginCmd: "<9600><xon>" # modem switches on
fax
> > > receive
> > > #
> > > #
> > > #QualifyCID: etc/cid # CID access control list file
> > > #CIDNumber: "NMBR = 27184624" # pattern string for
> phone
> > > numbe
> > > r info
> > > #CIDName: "NAME = " # pattern string for identity
> info
> > >
> > > ##receive status
> > > Aug 09 13:37:05.30: [25271]: SESSION BEGIN 00000125 886227174731
> > > Aug 09 13:37:05.31: [25271]: <-- [4:ATA\r]
> > > Aug 09 13:37:06.40: [25271]: --> [3:FAX]
> > > Aug 09 13:37:06.40: [25271]: ANSWER: FAX CONNECTION
> > > Aug 09 13:37:06.40: [25271]: RECV FAX: begin
> > > Aug 09 13:37:12.05: [25271]: --> [5:+FCON]
> > > Aug 09 13:37:13.60: [25271]: --> [29:+FTSI: " 2719 1658"]
> > > Aug 09 13:37:13.60: [25271]: REMOTE TSI "2719 1658"
> > > Aug 09 13:37:13.95: [25271]: --> [22:+FDCS: 0,5,0,2,0,0,0,5]
> > > Aug 09 13:37:13.95: [25271]: REMOTE wants 14400 bit/s
> > > Aug 09 13:37:13.95: [25271]: REMOTE wants page width 1728 pixels in
215
> mm
> > > Aug 09 13:37:13.95: [25271]: REMOTE wants unlimited page length
> > > Aug 09 13:37:13.95: [25271]: REMOTE wants 3.85 line/mm
> > > Aug 09 13:37:13.95: [25271]: REMOTE wants 1-D MR
> > > Aug 09 13:37:14.06: [25271]: --> [2:OK]
> > > Aug 09 13:37:14.06: [25271]: <-- [7:AT+FDR\r]
> > > Aug 09 13:37:17.07: [25271]: --> [5:+FCFR]
> > > Aug 09 13:37:19.39: [25271]: --> [22:+FDCS: 0,5,0,2,0,0,0,5]
> > > Aug 09 13:37:19.39: [25271]: REMOTE wants 14400 bit/s
> > > Aug 09 13:37:19.39: [25271]: REMOTE wants page width 1728 pixels in
215
> mm
> > > Aug 09 13:37:19.39: [25271]: REMOTE wants unlimited page length
> > > Aug 09 13:37:19.39: [25271]: REMOTE wants 3.85 line/mm
> > > Aug 09 13:37:19.39: [25271]: REMOTE wants 1-D MR
> > > Aug 09 13:37:19.39: [25271]: --> [7:CONNECT]
> > > Aug 09 13:37:19.39: [25271]: RECV: begin page
> > > Aug 09 13:37:19.39: [25271]: RECV: send trigger 021
> > > Aug 09 13:37:19.39: [25271]: <-- data [1]
> > > Aug 09 13:37:55.68: [25271]: RECV: 256 total lines, 0 bad lines, 0
> > > consecutive b
> > > ad lines
> > > Aug 09 13:37:55.69: [25271]: --> [17:+FPTS: 1,2219,0,0]
> > > Aug 09 13:37:58.14: [25271]: --> [7:+FET: 2]
> > > Aug 09 13:37:58.14: [25271]: RECV recv EOP (no more pages or
documents)
> > > Aug 09 13:37:58.14: [25271]: --> [2:OK]
> > > Aug 09 13:37:58.14: [25271]: RECV send MCF (message confirmation)
> > > Aug 09 13:37:58.14: [25271]: RECV FAX (00000125): from 2719 1658, page
1
> in
> > > 0:44
> > > , INF, 3.85 line/mm, 1-D MR
> > > Aug 09 13:37:58.15: [25271]: RECV FAX (00000125): recvq/fax00011.tif
> from
> > > 2719 1
> > > 658, route to <unspecified>, 1 pages in 0:52
> > > Aug 09 13:37:58.16: [25271]: <-- [7:AT+FDR\r]
> > > Aug 09 13:38:00.90: [25271]: --> [8:+FHNG: 0]
> > > Aug 09 13:38:00.90: [25271]: REMOTE HANGUP: Normal and proper end of
> > > connection
> > > (code 0)
> > > Aug 09 13:38:00.90: [25271]: RECV FAX: bin/faxrcvd
"recvq/fax00011.tif"
> > > "modem"
> > > "00000125" ""
> > > Aug 09 13:38:02.25: [25271]: RECV FAX: end
> > > Aug 09 13:38:02.25: [25271]: SESSION END
> > >
> > > Regard,
> > > Percy Yen pyen@asiansources.com
>
