|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
hylafax modem
I have a problem by sending a fax with hylafax.
I try to send a fax with the wfhc (windows for hylafax client). I get
a postscript file and after that the programm changes the file in a
tiff-file.
By sending the file with the modem (Ralley Com 336 Fax-Modem with
Rockwell-Chipsatz) only a few lines are to see on the fax.
Hier ist ein Ausdruck des Logfiles:
Jul 14 12:04:12.06: [ 6659]: SESSION BEGIN 00000040 0490219112
Jul 14 12:04:12.06: [ 6659]: SEND FAX: JOB 24 DEST 12 COMMID 00000040
Jul 14 12:04:12.06: [ 6659]: DELAY 2600 ms
Jul 14 12:04:14.67: [ 6659]: <-- [17:ATX3E0V1Q0S0=3D0H0\r]
Jul 14 12:04:15.33: [ 6659]: --> [2:OK]
Jul 14 12:04:15.33: [ 6659]: <-- [12:ATS8=3D2S7=3D60\r]
Jul 14 12:04:15.35: [ 6659]: --> [2:OK]
Jul 14 12:04:15.35: [ 6659]: <-- [12:AT+FCLASS=3D2\r]
Jul 14 12:04:15.37: [ 6659]: --> [2:OK]
Jul 14 12:04:15.37: [ 6659]: <-- [10:AT+FTBC=3D0\r]
Jul 14 12:04:15.39: [ 6659]: --> [5:ERROR]
Jul 14 12:04:15.39: [ 6659]: MODEM Command error
Jul 14 12:04:15.39: [ 6659]: <-- [10:AT+FBOR=3D0\r]
Jul 14 12:04:15.41: [ 6659]: --> [2:OK]
Jul 14 12:04:15.41: [ 6659]: <-- [13:AT+FPHCTO=3D30\r]
Jul 14 12:04:15.43: [ 6659]: --> [5:ERROR]
Jul 14 12:04:15.43: [ 6659]: MODEM Command error
Jul 14 12:04:15.43: [ 6659]: <-- [24:AT+FDCC=3D1,5,2,2,0,0,0,0\r]
Jul 14 12:04:15.46: [ 6659]: --> [2:OK]
Jul 14 12:04:15.46: [ 6659]: <-- [7:ATL1M1\r]
Jul 14 12:04:15.48: [ 6659]: --> [2:OK]
Jul 14 12:04:15.49: [ 6659]: <-- [12:AT+FCLASS=3D2\r]
Jul 14 12:04:15.60: [ 6659]: --> [2:OK]
Jul 14 12:04:15.60: [ 6659]: <-- [10:AT+FTBC=3D0\r]
Jul 14 12:04:15.72: [ 6659]: --> [5:ERROR]
Jul 14 12:04:15.72: [ 6659]: MODEM Command error
Jul 14 12:04:15.72: [ 6659]: <-- [10:AT+FBOR=3D0\r]
Jul 14 12:04:15.84: [ 6659]: --> [2:OK]
Jul 14 12:04:15.84: [ 6659]: <-- [13:AT+FPHCTO=3D30\r]
Jul 14 12:04:15.96: [ 6659]: --> [5:ERROR]
Jul 14 12:04:15.96: [ 6659]: MODEM Command error
Jul 14 12:04:15.96: [ 6659]: <-- [24:AT+FDCC=3D1,5,2,2,0,0,0,0\r]
Jul 14 12:04:16.09: [ 6659]: --> [2:OK]
Jul 14 12:04:16.09: [ 6659]: <-- [22:AT+FLID=3D"Dorfmueller"\r]
Jul 14 12:04:16.22: [ 6659]: --> [2:OK]
Jul 14 12:04:16.23: [ 6659]: <-- [24:AT+FDIS=3D0,5,0,2,0,0,0,0\r]
Jul 14 12:04:16.35: [ 6659]: --> [2:OK]
Jul 14 12:04:16.37: [ 6659]: DIAL 12
Jul 14 12:04:16.37: [ 6659]: <-- [7:ATDT12\r]
Jul 14 12:04:27.04: [ 6659]: --> [5:+FCON]
Jul 14 12:04:30.17: [ 6659]: --> [29:+FCSI: " 0492191882107"]
Jul 14 12:04:30.17: [ 6659]: REMOTE CSI "0492191882107"
Jul 14 12:04:30.17: [ 6659]: --> [22:+FDIS: 1,3,0,2,0,0,0,4]
Jul 14 12:04:30.18: [ 6659]: --> [2:OK]
Jul 14 12:04:30.18: [ 6659]: REMOTE best rate 9600 bit/s
Jul 14 12:04:30.18: [ 6659]: REMOTE max page width 1728 pixels in 215
mm
Jul 14 12:04:30.18: [ 6659]: REMOTE max unlimited page length
Jul 14 12:04:30.18: [ 6659]: REMOTE best vres 7.7 line/mm
Jul 14 12:04:30.18: [ 6659]: REMOTE best format 1-D MR
Jul 14 12:04:30.18: [ 6659]: REMOTE best 20 ms, 10 ms/scanline
Jul 14 12:04:30.18: [ 6659]: USE 9600 bit/s
Jul 14 12:04:30.18: [ 6659]: USE 20 ms, 10 ms/scanline
Jul 14 12:04:30.18: [ 6659]: SEND file "docq/doc24.ps;00"
Jul 14 12:04:30.18: [ 6659]: USE page width 1728 pixels in 215 mm
Jul 14 12:04:30.18: [ 6659]: USE unlimited page length
Jul 14 12:04:30.18: [ 6659]: USE 3.85 line/mm
Jul 14 12:04:30.18: [ 6659]: USE 1-D MR
Jul 14 12:04:30.18: [ 6659]: <-- [7:AT+FDT\r]
Jul 14 12:04:35.86: [ 6659]: --> [22:+FDCS: 0,3,0,2,0,0,0,5]
Jul 14 12:04:36.44: [ 6659]: --> [7:CONNECT]
Jul 14 12:04:36.44: [ 6659]: SEND wait for XON
Jul 14 12:04:36.44: [ 6659]: --> [1:]
Jul 14 12:04:36.45: [ 6659]: SEND begin page
Jul 14 12:04:36.46: [ 6659]: <-- data [1028]
Jul 14 12:04:36.46: [ 6659]: <-- data [1025]
Jul 14 12:04:36.46: [ 6659]: <-- data [1026]
Jul 14 12:04:36.46: [ 6659]: <-- data [1026]
Jul 14 12:04:36.46: [ 6659]: <-- data [1024]
Jul 14 12:04:38.46: [ 6659]: <-- data [1027]
Jul 14 12:04:38.46: [ 6659]: <-- data [1026]
Jul 14 12:04:38.46: [ 6659]: <-- data [1025]
Jul 14 12:04:40.46: [ 6659]: <-- data [1025]
Jul 14 12:04:40.46: [ 6659]: <-- data [1028]
Jul 14 12:04:40.46: [ 6659]: <-- data [1024]
Jul 14 12:04:40.46: [ 6659]: <-- data [1024]
Jul 14 12:04:42.46: [ 6659]: <-- data [1024]
Jul 14 12:04:42.46: [ 6659]: <-- data [1024]
Jul 14 12:04:42.46: [ 6659]: <-- data [1025]
Jul 14 12:04:42.46: [ 6659]: <-- data [1024]
Jul 14 12:04:44.46: [ 6659]: <-- data [1024]
Jul 14 12:04:44.46: [ 6659]: <-- data [1024]
Jul 14 12:04:44.46: [ 6659]: <-- data [1028]
Jul 14 12:04:46.45: [ 6659]: <-- data [1026]
Jul 14 12:04:46.46: [ 6659]: <-- data [1024]
Jul 14 12:04:46.46: [ 6659]: <-- data [1028]
Jul 14 12:04:46.46: [ 6659]: <-- data [899]
Jul 14 12:04:48.45: [ 6659]: SENT 23425 bytes of data
Jul 14 12:04:48.45: [ 6659]: <-- data [2]
Jul 14 12:04:48.46: [ 6659]: SEND end page
Jul 14 12:04:50.53: [ 6659]: --> [1:]
Jul 14 12:04:50.53: [ 6659]: --> [2:OK]
Jul 14 12:04:50.53: [ 6659]: SEND send EOP (no more pages or
documents)
Jul 14 12:04:50.54: [ 6659]: <-- [9:AT+FET=3D2\r]
Jul 14 12:04:53.48: [ 6659]: --> [8:+FPTS: 1]
Jul 14 12:04:53.48: [ 6659]: SEND recv MCF (message confirmation)
Jul 14 12:04:53.49: [ 6659]: SEND FAX (00000040): FROM user1@server
TO 12 (page 1 of 1 sent in 0:23)
Jul 14 12:04:53.49: [ 6659]: SEND FAX (00000040): FROM user1@server
TO 12 (docq/doc24.ps;00 sent in 0:23)
Jul 14 12:04:53.49: [ 6659]: <-- [5:ATH0\r]
Jul 14 12:04:55.68: [ 6659]: --> [8:+FHNG: 0]
Jul 14 12:04:55.68: [ 6659]: REMOTE HANGUP: Normal and proper end of
connection (code 0)
Jul 14 12:04:55.68: [ 6659]: --> [2:OK]
Jul 14 12:04:55.69: [ 6659]: SESSION END
Mit freundlichen Gr=FC=DFen
Michael Dorfm=FCller
Diplom-Kaufmann Steuerberater
mailto : Steuerberater@Dorfmueller.com
www.dorfmueller.de
Anton-K=FCppers-Weg 19
48255 Remscheid
Telefon +49 2191 882106
Telafax +49 2191 882107
