Sent fax truncated with Rockwell chipset mode (was: hylafax modem)

To: Steuerberater@dorfmueller.de
Subject: flexfax: Sent fax truncated with Rockwell chipset mode (was: hylafax modem)
From: David Woolley <david@djwhome.demon.co.uk>
Cc: flexfax@sgi.com
Reply-To: flexfax@sgi.com
Date: Mon, 16 Aug 1999 08:00:35 +0100 (BST)

> By sending the file with the modem (Ralley Com 336 Fax-Modem with
> Rockwell-Chipsatz) only a few lines are to see on the fax.

> Jul 14 12:04:30.18: [ 6659]: USE 9600 bit/s

> Jul 14 12:04:36.45: [ 6659]: SEND begin page

> Jul 14 12:04:48.45: [ 6659]: SENT 23425 bytes of data
> Jul 14 12:04:48.45: [ 6659]: <-- data [2]
> Jul 14 12:04:48.46: [ 6659]: SEND end page
> Jul 14 12:04:50.53: [ 6659]: --> [1:]
> Jul 14 12:04:50.53: [ 6659]: --> [2:OK]

23,425 bytes in 14 seconds is a lot more than 9600 * 1.25; you have
no effective flow control.

Follow-Ups:
- Re: Sent fax truncated with Rockwell chipset mode (was: hylafax modem)
  - From: Server <Steuerberater@dorfmueller.de>

References:
- hylafax modem
  - From: Server <Steuerberater@dorfmueller.de>

Prev by Date: docq files not getting cleaned up
Next by Date: Re: FIFO.ttyS0 not connected
Prev by thread: hylafax modem
Next by thread: Re: Sent fax truncated with Rockwell chipset mode (was: hylafax modem)
Index(es):
- Main
- Thread

Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services