Re: flexfax: Receiving fax only

[David Woolley <david@djwhome.demon.co.uk>]

> Well, there are two different versions of the fax standard, known as
> "class 1" and "class 2.0". The above command simply puts the modem in

There are at least 3:  1, 2 and 2.0.

> > ModemSetupAACmd:        AT+FAA=0
> Now, this did the real trick. The modem immediately started "sounding
> like a fax machine" when I made this modification. I think it is far
> from obvious from the manuals that this needs to be changed. You'd think
> that "Adaptive Answer: no" had the same effect, but apparently not.

If the modem remembered the FAA=1, it would need to be explicitly forced
into FAA=0.  Hylafax doesn't have internal knowledge of how to do this
and needs the setup commands.