Re: flexfax: Receiving fax only

[Toralf Lund <toralf@praha.kscanners.no>]

David Woolley wrote:
> 
> > Well, there are two different versions of the fax standard, known as
> > "class 1" and "class 2.0". The above command simply puts the modem in
> 
> There are at least 3:  1, 2 and 2.0.
> 
> > > ModemSetupAACmd:        AT+FAA=0
> > Now, this did the real trick. The modem immediately started "sounding
> > like a fax machine" when I made this modification. I think it is far
> > from obvious from the manuals that this needs to be changed. You'd think
> > that "Adaptive Answer: no" had the same effect, but apparently not.
> 
> If the modem remembered the FAA=1, it would need to be explicitly forced
> into FAA=0.  Hylafax doesn't have internal knowledge of how to do this
> and needs the setup commands.
Then what exactly does the AdaptiveAnswer setting do?
-- 
- T. Lund