Re: [hylafax-users] Problem Faxing To Brother NSC/IntelliFax

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

Nothing clear is being indicated by these session logs other than what 
we already know.

Can you confirm that this only happens in some instances with Brother 
fax machines when MMR is used?

Can you confirm that this never happens with those same receivers when 
MMR is used but when 'sendfax -2' was used?

Thanks,

Lee.

pelmgreen@xxxxxxxxxxxxxxxxx wrote

> Hi
>
> Finally, I was able to arrange an upgrade of the server software - hylafax
> is now running 4.2.5.5
>
> After the upgrade, a few transmissions (incl coverpage) were done but
> clients still complain about partial pages received, although the c00000xxx
> report successful transmissions.
> see attached
>
> Unless anything obvoius can be derived from the logs - the clients are
> prepared to help in testing
> Please advice how to debug this
>
> Thanks
> Per Elmgreen
>
>
>
>
>
>
>
>
>
>
> ----- Original Message -----
> From: "Lee Howard" <faxguy@xxxxxxxxxxxxxxxx>
> To: <pelmgreen@xxxxxxxxxxxxxxxxx>
> Cc: <hylafax-users@xxxxxxxxxxx>
> Sent: Wednesday, January 25, 2006 6:20 PM
> Subject: Re: [hylafax-users] Problem Faxing To Brother NSC/IntelliFax
>
>
>  
>
> > For the moment the coverpage issue is clouding things up.  Please do not
> > use a coverpage.  Without the coverpage does the 'sendfax -2' work every
> > time?  Without the 'sendfax -2' it consistently fails somewhere in the
> >    
> fax?
>  
>
> > Thanks,
> >
> > Lee.
> >
> >
> > pelmgreen@xxxxxxxxxxxxxxxxx wrote:
> >
> >    
> >
> > > Thanks for your reply,
> > >
> > > I've been able to test with a document (.ps) (2pages) that consistently
> > > fails
> > > the document is produced using htmldoc 1.8.24 (html->ps)
> > >
> > > ModemSoftRTFCC is not set in config.ttyS0 so the default (yes?) is in use
> > >
> > > Sending 3 pages(incl. coverpage)
> > >
> > > Using sendfax -2 actually transmit all pages ok but the coverpage fails
> > >
> > > Without using -2
> > > Faxing the same document  3 times gave a different result
> > > Coverpage ok every time
> > > Either 1st or 2nd page got cut 1/5 to 1/2 down the page
> > >
> > > c00000xxx all report successful transmission
> > >
> > > What next?
> > >
> > > Many thanks
> > > Pete
> > >
> > >
> > >      
> > ____________________ HylaFAX(tm) Users Mailing List
> >    
> _______________________
>  
>
> >  To subscribe/unsubscribe, click
> >    
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  
>
> > On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx <
> >    
> /dev/null
>  
>
> >  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
> >
> >
> >
> >    
>
>
>  


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*