Re: [hylafax-users] caller ID issue

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

Try switching to Class 1.

Lee.


Ivan Petrov wrote:

> Hi,
>  
> I am using hylafax 4.2.3 on RHEL 3 (updater 6) with a US Robotics 
> Sportster 56K modem. My line has caller ID option. I am having 
> problems receiving faxes if I enable caller ID in modem config file. 
> Here is what I add to the modem config file (I also switched to answer 
> on 2 ring so I can get the caller ID info):
>  
> ModemResetCmds:         AT#CID=1
>  
> When enabled - here is what happens: in hylafax log file I get:
>  
> Dec 15 13:25:50.50: [ 4553]: SESSION BEGIN 000000053 14166075301
> Dec 15 13:25:50.50: [ 4553]: HylaFAX (tm) Version 4.2.3
> Dec 15 13:25:50.50: [ 4553]: CallID: "4165555555" "COMPANYNAME"
> Dec 15 13:25:50.50: [ 4553]: <-- [4:ATA\r]
> Dec 15 13:26:38.57: [ 4553]: --> [4:+FCO]
> Dec 15 13:26:38.57: [ 4553]: ANSWER: FAX CONNECTION  DEVICE '/dev/modem'
> Dec 15 13:26:38.57: [ 4553]: RECV FAX: begin
> Dec 15 13:26:41.00: [ 4553]: --> [7:+FHS:74]
> Dec 15 13:26:41.00: [ 4553]: REMOTE HANGUP: T.30 T1 timeout after EOM 
> received (code 74)
> Dec 15 13:26:41.01: [ 4553]: --> [2:OK]
> Dec 15 13:26:41.01: [ 4553]: RECV FAX: T.30 T1 timeout after EOM received
> Dec 15 13:26:41.01: [ 4553]: RECV FAX: end
> Dec 15 13:26:41.01: [ 4553]: SESSION END
>  
> What happens is sending party closes the call. I tried with couple of 
> different fax machines - result always the same.
>  
> If I only change
>  
> ModemResetCmds:         AT#CID=0
>  
> (disable callerID) I can receive fax without problems.
>  
> Anyone have an idea what could be wrong?
>
> Thank you!
>  
> Ivan
>  



____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*