[hylafax-users] "No carrier detected" with USR5610B

To: hylafax-users@xxxxxxxxxxx
Subject: [hylafax-users] "No carrier detected" with USR5610B
From: Jason Gill <jasongill@xxxxxxxxx>
Date: Wed, 14 Dec 2005 15:35:57 -0500

I set up a HylaFAX 4.2.3 (RHEL 4) server a few weeks ago with a PCI US
Robotics USR5610B modem on ttyS4; this machine has been sending and
receiving faxes without any problems until today.

I searched for the error message that is showing up in the log but
couldn't find any real resolution, so I appreciate any guidance.

Receiving faxes still works fine, and an old fax machine hooked up to
the same phone jack sends faxes without a problem, but the HylaFAX
machine is no longer able to send. Each sent message results in:

Dec 14 15:16:30.89: [ 3922]: SESSION BEGIN 000000061 16148718674
Dec 14 15:16:30.89: [ 3922]: HylaFAX (tm) Version 4.2.3
Dec 14 15:16:30.89: [ 3922]: SEND FAX: JOB 14 DEST 8718674 COMMID
000000061 DEVICE '/dev/ttyS4' FROM 'root <root@officeserver>' USER
root
Dec 14 15:16:30.89: [ 3922]: <-- [12:AT+FCLASS=1\r]
Dec 14 15:16:30.90: [ 3922]: --> [2:OK]
Dec 14 15:16:30.90: [ 3922]: DIAL 8718674
Dec 14 15:16:30.90: [ 3922]: <-- [12:ATDT8718674\r]
Dec 14 15:17:26.18: [ 3922]: --> [10:NO CARRIER]
Dec 14 15:17:26.18: [ 3922]: SEND FAILED: JOB 14 DEST 8718674 ERR No
carrier detected
Dec 14 15:17:26.18: [ 3922]: <-- [5:ATH0\r]
Dec 14 15:17:26.19: [ 3922]: --> [2:OK]
Dec 14 15:17:26.19: [ 3922]: SESSION END

The receiving fax machine rings and answers, but the HylaFAX server
never responds. I have tried sending faxes to multiple machines in
different locations and with the same result. As an example, I have
attached a successful send to the same device as above from about a
week ago at the end of my message. No configuration changes have taken
place since, and we have tried the obvious things like a new piece of
phone cable to the phone jack, etc.

Thanks for your help -- I've been happy with HylaFAX so far but would
like to be able to send faxes again.

Jason Gill





Successful previous message sent to same device as the failure above:

Dec 03 17:04:22.20: [ 3452]: SESSION BEGIN 000000006 16148718674
Dec 03 17:04:22.20: [ 3452]: HylaFAX (tm) Version 4.2.3
Dec 03 17:04:22.20: [ 3452]: SEND FAX: JOB 4 DEST 8718674 COMMID
000000006 DEVICE '/dev/ttyS4' FROM 'Pickering Valuation <XXXX>' USER
XXXX
Dec 03 17:04:22.20: [ 3452]: <-- [12:AT+FCLASS=1\r]
Dec 03 17:04:22.21: [ 3452]: --> [2:OK]
Dec 03 17:04:22.26: [ 3452]: DIAL 8718674
Dec 03 17:04:22.26: [ 3452]: <-- [12:ATDT8718674\r]
Dec 03 17:04:41.42: [ 3452]: --> [7:CONNECT]
Dec 03 17:04:43.21: [ 3452]: --> [2:OK]
Dec 03 17:04:43.21: [ 3452]: REMOTE NSF "00 00 31 20 EE FA C4 80 15 84
0D DD 00 00 DD DD 00 00 DD DD 00 00 00 00 00 00 00 00 ED A1 B0 00 00
24"
Dec 03 17:04:43.21: [ 3452]: NSF remote fax equipment: Sharp/Olivetti
Dec 03 17:04:43.21: [ 3452]: <-- [9:AT+FRH=3\r]
Dec 03 17:04:43.23: [ 3452]: --> [7:CONNECT]
Dec 03 17:04:43.96: [ 3452]: --> [2:OK]
Dec 03 17:04:43.96: [ 3452]: REMOTE CSI "6148718674"
Dec 03 17:04:43.96: [ 3452]: <-- [9:AT+FRH=3\r]
Dec 03 17:04:43.97: [ 3452]: --> [7:CONNECT]
Dec 03 17:04:44.31: [ 3452]: --> [2:OK]
Dec 03 17:04:44.31: [ 3452]: REMOTE best rate 33600 bit/s
Dec 03 17:04:44.31: [ 3452]: REMOTE max A3 page width (303 mm)
Dec 03 17:04:44.31: [ 3452]: REMOTE max unlimited page length
Dec 03 17:04:44.31: [ 3452]: REMOTE best vres R16 x 15.4 line/mm
Dec 03 17:04:44.31: [ 3452]: REMOTE format support: MH, MR, MMR
Dec 03 17:04:44.31: [ 3452]: REMOTE supports T.30 Annex A, 256-byte ECM
Dec 03 17:04:44.31: [ 3452]: REMOTE best 0 ms/scanline
Dec 03 17:04:44.31: [ 3452]: USE 14400 bit/s
Dec 03 17:04:44.31: [ 3452]: USE error correction mode
Dec 03 17:04:44.31: [ 3452]: SEND file "docq/doc4.ps;f0"
Dec 03 17:04:44.31: [ 3452]: USE A4 page width (215 mm)
Dec 03 17:04:44.31: [ 3452]: USE unlimited page length
Dec 03 17:04:44.31: [ 3452]: USE 3.85 line/mm
Dec 03 17:04:44.31: [ 3452]: USE 2-D MMR
Dec 03 17:04:44.31: [ 3452]: USE 0 ms/scanline
Dec 03 17:04:44.31: [ 3452]: SEND training at v.17 14400 bit/s
Dec 03 17:04:44.31: [ 3452]: <-- [9:AT+FRS=7\r]
Dec 03 17:04:45.07: [ 3452]: --> [2:OK]
Dec 03 17:04:45.07: [ 3452]: <-- [9:AT+FTH=3\r]
Dec 03 17:04:45.26: [ 3452]: --> [7:CONNECT]
Dec 03 17:04:45.26: [ 3452]: <-- data [23]
Dec 03 17:04:45.26: [ 3452]: <-- data [2]
Dec 03 17:04:45.27: [ 3452]: --> [7:CONNECT]
Dec 03 17:04:45.27: [ 3452]: <-- data [7]
Dec 03 17:04:45.27: [ 3452]: <-- data [2]
Dec 03 17:04:47.26: [ 3452]: --> [2:OK]
Dec 03 17:04:47.26: [ 3452]: <-- [9:AT+FTS=7\r]
Dec 03 17:04:47.34: [ 3452]: --> [2:OK]
Dec 03 17:04:47.34: [ 3452]: <-- [11:AT+FTM=145\r]
Dec 03 17:04:48.81: [ 3452]: --> [7:CONNECT]
Dec 03 17:04:48.81: [ 3452]: <-- data [1024]
Dec 03 17:04:49.13: [ 3452]: <-- data [1024]
Dec 03 17:04:49.45: [ 3452]: <-- data [652]
Dec 03 17:04:49.78: [ 3452]: <-- data [2]
Dec 03 17:04:50.34: [ 3452]: --> [2:OK]
Dec 03 17:04:50.34: [ 3452]: <-- [9:AT+FRS=1\r]
Dec 03 17:04:50.36: [ 3452]: --> [2:OK]
Dec 03 17:04:50.36: [ 3452]: <-- [9:AT+FRH=3\r]
Dec 03 17:04:50.66: [ 3452]: --> [7:CONNECT]
Dec 03 17:04:51.66: [ 3452]: --> [2:OK]
Dec 03 17:04:51.66: [ 3452]: TRAINING succeeded
Dec 03 17:04:51.66: [ 3452]: SEND begin page
Dec 03 17:04:51.66: [ 3452]: SEND EOFB
Dec 03 17:04:51.66: [ 3452]: SEND send frame number 0
Dec 03 17:04:51.66: [ 3452]: SEND send frame number 1
Dec 03 17:04:51.66: [ 3452]: SEND send frame number 2
Dec 03 17:04:51.66: [ 3452]: SEND send frame number 3
Dec 03 17:04:51.66: [ 3452]: DELAY 200 ms
Dec 03 17:04:51.86: [ 3452]: <-- [11:AT+FTM=146\r]
Dec 03 17:04:52.11: [ 3452]: --> [7:CONNECT]
Dec 03 17:04:52.12: [ 3452]: <-- data [1039]
Dec 03 17:04:52.43: [ 3452]: <-- data [429]
Dec 03 17:04:52.43: [ 3452]: <-- data [2]
Dec 03 17:04:52.95: [ 3452]: --> [2:OK]
Dec 03 17:04:52.95: [ 3452]: <-- [9:AT+FTS=9\r]
Dec 03 17:04:53.05: [ 3452]: --> [2:OK]
Dec 03 17:04:53.05: [ 3452]: <-- [9:AT+FTH=3\r]
Dec 03 17:04:53.20: [ 3452]: --> [7:CONNECT]
Dec 03 17:04:53.20: [ 3452]: <-- data [7]
Dec 03 17:04:53.20: [ 3452]: <-- data [2]
Dec 03 17:04:54.48: [ 3452]: --> [2:OK]
Dec 03 17:04:54.48: [ 3452]: SEND send PPS (partial page signal)
Dec 03 17:04:54.48: [ 3452]: SEND send EOP (no more pages or documents)
Dec 03 17:04:54.48: [ 3452]: <-- [9:AT+FRH=3\r]
Dec 03 17:04:55.02: [ 3452]: --> [7:CONNECT]
Dec 03 17:04:55.91: [ 3452]: --> [2:OK]
Dec 03 17:04:55.91: [ 3452]: SEND recv MCF (message confirmation)
Dec 03 17:04:55.91: [ 3452]: <-- [9:AT+FRS=7\r]
Dec 03 17:04:56.67: [ 3452]: --> [2:OK]
Dec 03 17:04:56.67: [ 3452]: SEND end page
Dec 03 17:04:56.67: [ 3452]: SEND FAX (000000006): FROM XXXX TO
8718674 (page 1 of 1 sent in 0:12)
Dec 03 17:04:56.67: [ 3452]: SEND FAX (000000006): FROM XXXX TO
8718674 (docq/doc4.ps;f0 sent in 0:12)
Dec 03 17:04:57.67: [ 3452]: <-- [9:AT+FTH=3\r]
Dec 03 17:04:57.86: [ 3452]: --> [7:CONNECT]
Dec 03 17:04:57.86: [ 3452]: <-- data [3]
Dec 03 17:04:57.86: [ 3452]: <-- data [2]
Dec 03 17:04:59.04: [ 3452]: --> [2:OK]
Dec 03 17:04:59.04: [ 3452]: <-- [5:ATH0\r]
Dec 03 17:04:59.14: [ 3452]: --> [2:OK]
Dec 03 17:04:59.14: [ 3452]: SESSION END

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

Follow-Ups:
- Re: [hylafax-users] "No carrier detected" with USR5610B
  - From: Lee Howard

Prev by Date: [hylafax-users] German umlauts in cover page (was: send fax with Charaptes special)
Next by Date: [hylafax-users] slowness in queuing
Previous by thread: [hylafax-users] Doublequotes in StationID
Next by thread: Re: [hylafax-users] "No carrier detected" with USR5610B
Index(es):
- Main
- Thread

Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services